mirror of
https://github.com/torvalds/linux.git
synced 2026-04-19 23:34:00 -04:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
104 lines
2.0 KiB
YAML
104 lines
2.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Lontium LT8912B MIPI to HDMI Bridge
|
|
|
|
maintainers:
|
|
- Adrien Grassein <adrien.grassein@gmail.com>
|
|
|
|
description: |
|
|
The LT8912B is a bridge device which convert DSI to HDMI
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- lontium,lt8912b
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: GPIO connected to active high RESET pin.
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
unevaluatedProperties: false
|
|
description:
|
|
Primary MIPI port for MIPI input
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes: true
|
|
|
|
required:
|
|
- data-lanes
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: |
|
|
HDMI port, should be connected to a node compatible with the
|
|
hdmi-connector binding.
|
|
|
|
required:
|
|
- port@0
|
|
- port@1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reset-gpios
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hdmi-bridge@48 {
|
|
compatible = "lontium,lt8912b";
|
|
reg = <0x48>;
|
|
reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi_out_in: endpoint {
|
|
data-lanes = <0 1 2 3>;
|
|
remote-endpoint = <&mipi_dsi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
endpoint {
|
|
remote-endpoint = <&hdmi_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|