mirror of
https://github.com/torvalds/linux.git
synced 2026-04-19 23:34:00 -04:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
110 lines
2.6 KiB
YAML
110 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
|
|
|
|
maintainers:
|
|
- Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
|
|
description: |-
|
|
The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
|
|
with an active array size of 3280H x 2464V. It is programmable through
|
|
I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
|
|
Image data is sent through MIPI CSI-2, which is configured as either 2 or
|
|
4 data lanes.
|
|
|
|
properties:
|
|
compatible:
|
|
const: sony,imx219
|
|
|
|
reg:
|
|
description: I2C device address
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
VDIG-supply:
|
|
description:
|
|
Digital I/O voltage supply, 1.8 volts
|
|
|
|
VANA-supply:
|
|
description:
|
|
Analog voltage supply, 2.8 volts
|
|
|
|
VDDL-supply:
|
|
description:
|
|
Digital core voltage supply, 1.2 volts
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: |-
|
|
Reference to the GPIO connected to the xclr pin, if any.
|
|
Must be released (set high) after all supplies are applied.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
description: |-
|
|
The sensor supports either two-lane, or four-lane operation.
|
|
If this property is omitted four-lane operation is assumed.
|
|
For two-lane operation the property must be set to <1 2>.
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
|
|
clock-noncontinuous: true
|
|
link-frequencies: true
|
|
|
|
required:
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- VANA-supply
|
|
- VDIG-supply
|
|
- VDDL-supply
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
imx219: sensor@10 {
|
|
compatible = "sony,imx219";
|
|
reg = <0x10>;
|
|
clocks = <&imx219_clk>;
|
|
VANA-supply = <&imx219_vana>; /* 2.8v */
|
|
VDIG-supply = <&imx219_vdig>; /* 1.8v */
|
|
VDDL-supply = <&imx219_vddl>; /* 1.2v */
|
|
|
|
port {
|
|
imx219_0: endpoint {
|
|
remote-endpoint = <&csi1_ep>;
|
|
data-lanes = <1 2>;
|
|
clock-noncontinuous;
|
|
link-frequencies = /bits/ 64 <456000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|