mirror of
https://github.com/torvalds/linux.git
synced 2026-04-19 23:34:00 -04:00
c639a708a0
Convert the Xilinx GMII to RGMII Converter device tree binding documentation to json schema. This converter is usually used as gem <---> gmii2rgmii <---> external phy and, it's phy-handle should point to the phandle of the external phy. Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com> Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
56 lines
1.5 KiB
YAML
56 lines
1.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Xilinx GMII to RGMII Converter
|
|
|
|
maintainers:
|
|
- Harini Katakam <harini.katakam@amd.com>
|
|
|
|
description:
|
|
The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
|
|
Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
|
|
ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
|
|
This core can be used in all three modes of operation(10/100/1000 Mb/s).
|
|
The Management Data Input/Output (MDIO) interface is used to configure the
|
|
speed of operation. This core can switch dynamically between the three
|
|
different speed modes by configuring the converter register through mdio write.
|
|
The core cannot function without an external phy connected to it.
|
|
|
|
properties:
|
|
compatible:
|
|
const: xlnx,gmii-to-rgmii-1.0
|
|
|
|
reg:
|
|
minimum: 0
|
|
maximum: 31
|
|
description: The ID number for the phy.
|
|
|
|
phy-handle:
|
|
$ref: ethernet-controller.yaml#/properties/phy-handle
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- phy-handle
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
gmiitorgmii@8 {
|
|
compatible = "xlnx,gmii-to-rgmii-1.0";
|
|
reg = <8>;
|
|
phy-handle = <&phy>;
|
|
};
|
|
};
|