mirror of
https://github.com/torvalds/linux.git
synced 2026-04-26 02:22:28 -04:00
b110e4cc44
Not all supported boards actually use the PX30's built-in (G)MAC, while the SoC TRM and the datasheet don't define some standard numbering in this case. Thus, remove the ethernet0 alias from the PX30 SoC dtsi file, and add the same alias back to the appropriate board dts(i) files. This is quite similar to the already performed migration of the mmcX aliases from the Rockchip SoC dtsi files to the board dts(i) files. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/0d9da8959b4f567622676c34b5feb74c49489554.1702366958.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
131 lines
2.4 KiB
Plaintext
131 lines
2.4 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2020 Engicam srl
|
|
* Copyright (c) 2020 Amarula Solutions
|
|
* Copyright (c) 2020 Amarula Solutions(India)
|
|
*/
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = &gmac;
|
|
mmc1 = &sdmmc;
|
|
mmc2 = &sdio;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys"; /* +5V */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&xin32k>;
|
|
clock-names = "ext_clock";
|
|
post-power-on-delay-ms = <80>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
};
|
|
|
|
vcc3v3_btreg: vcc3v3-btreg {
|
|
compatible = "regulator-gpio";
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_enable_h>;
|
|
regulator-name = "btreg-gpio-supply";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
states = <3300000 0x0>;
|
|
};
|
|
|
|
vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_rf_aux_mod";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
xin32k: xin32k {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "xin32k";
|
|
};
|
|
};
|
|
|
|
&sdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bus-width = <4>;
|
|
clock-frequency = <50000000>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&gmac {
|
|
clock_in_out = "output";
|
|
phy-supply = <&vcc_3v3>; /* +3V3_SOM */
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 50000 50000>;
|
|
snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <800>;
|
|
vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */
|
|
vqmmc-supply = <&vcc_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy {
|
|
status = "okay";
|
|
|
|
u2phy_host: host-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-0 = <&uart2m1_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb20_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|