Jeremy McNicoll bfd123bf91 [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting ...

The following adds local bus, flash and MTD partition nodes for
sbc8548. As well, a compatible field for the soc node, so that
of_platform_bus_probe() will pick it up.

Something that is provided through this newly added epld node
is the Hardware Revision which is now being utilized.

Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2008-05-13 08:53:48 -05:00

..

adder875-redboot.dts

[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts

2008-02-05 23:33:22 -06:00

adder875-uboot.dts

[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts

2008-02-05 23:33:22 -06:00

bamboo.dts

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

canyonlands.dts

[POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts

2008-04-24 13:32:46 -05:00

cm5200.dts

[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format

2008-04-29 07:19:07 -06:00

ebony.dts

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

ep88xc.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

ep405.dts

[POWERPC] 4xx: Add aliases node to 4xx dts files

2007-12-23 13:36:30 -06:00

ep8248e.dts

[POWERPC] ep8248e: Reference SMC parameter RAM base in the device tree.

2008-04-17 01:01:37 -05:00

glacier.dts

[POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts

2008-04-24 13:32:46 -05:00

haleakala.dts

[POWERPC] 4xx: Change dts files to support jumbo frames

2008-04-05 09:32:37 -05:00

holly.dts

[POWERPC] DTS cleanup

2007-09-14 08:53:16 -05:00

katmai.dts

[POWERPC] 4xx: Change dts files to support jumbo frames

2008-04-05 09:32:37 -05:00

kilauea.dts

[POWERPC] 4xx: Change dts files to support jumbo frames

2008-04-05 09:32:37 -05:00

ksi8560.dts

[POWERPC] 85xx: Emerson KSI8560 device tree

2008-03-26 11:30:46 -05:00

kuroboxHD.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

kuroboxHG.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

lite5200.dts

[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format

2008-04-29 07:19:07 -06:00

lite5200b.dts

[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format

2008-04-29 07:19:07 -06:00

makalu.dts

[POWERPC] 4xx: Change dts files to support jumbo frames

2008-04-05 09:32:37 -05:00

motionpro.dts

[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format

2008-04-29 07:19:07 -06:00

mpc832x_mds.dts

[POWERPC] QE: UCC nodes cleanup

2008-04-17 01:01:38 -05:00

mpc832x_rdb.dts

[POWERPC] QE: UCC nodes cleanup

2008-04-17 01:01:38 -05:00

mpc834x_mds.dts

[POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dts

2008-02-05 23:29:45 -06:00

mpc836x_mds.dts

[POWERPC] QE: UCC nodes cleanup

2008-04-17 01:01:38 -05:00

mpc866ads.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

mpc885ads.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

mpc5121ads.dts

[POWERPC] mpc512x: Device tree for MPC5121 ADS

2008-02-06 14:05:23 -07:00

mpc7448hpc2.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

mpc8272ads.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

mpc8313erdb.dts

[POWERPC] 83xx: Add rtc node to mpc8313erdb dts

2008-02-05 23:30:14 -06:00

mpc8315erdb.dts

[POWERPC] 83xx: configure USB clock for MPC8315E

2008-02-05 23:19:03 -06:00

mpc8349emitx.dts

[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.

2008-01-28 16:16:38 -06:00

mpc8349emitxgp.dts

[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.

2008-01-28 16:16:38 -06:00

mpc8377_mds.dts

[POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board.

2008-05-13 08:53:48 -05:00

mpc8377_rdb.dts

[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts

2008-03-31 10:23:48 -05:00

mpc8378_mds.dts

[POWERPC] 83xx: Add local bus device nodes to MPC837xMDS device trees.

2008-03-07 08:42:22 -06:00

mpc8378_rdb.dts

[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts

2008-03-31 10:23:48 -05:00

mpc8379_mds.dts

[POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata

2008-03-31 10:27:35 -05:00

mpc8379_rdb.dts

[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts

2008-03-31 10:23:48 -05:00

mpc8540ads.dts

[POWERPC] 85xx: Convert dts to v1 syntax

2008-04-17 01:28:15 -05:00

mpc8541cds.dts

[POWERPC] 85xx: Convert dts to v1 syntax

2008-04-17 01:28:15 -05:00

mpc8544ds.dts

[POWERPC] 85xx: minor .dts cleanups

2008-04-17 01:29:14 -05:00

mpc8548cds.dts

[POWERPC] 85xx: Convert dts to v1 syntax

2008-04-17 01:28:15 -05:00

mpc8555cds.dts

[POWERPC] 85xx: Convert dts to v1 syntax

2008-04-17 01:28:15 -05:00

mpc8560ads.dts

[POWERPC] 85xx: Convert dts to v1 syntax

2008-04-17 01:28:15 -05:00

mpc8568mds.dts

[POWERPC] 85xx: Fix the size of qe muram for MPC8568E

2008-04-17 09:52:18 -05:00

mpc8572ds.dts

[POWERPC] 85xx: Convert dts to v1 syntax

2008-04-17 01:28:15 -05:00

mpc8610_hpcd.dts

[POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes

2008-05-13 08:53:48 -05:00

mpc8641_hpcn.dts

[RAPIDIO] Add RapidIO node into MPC8641HPCN dts file

2008-04-29 19:40:28 +10:00

pcm030.dts

[POWERPC] mpc5200: add Phytec pcm030 board support

2008-04-29 07:17:12 -06:00

pq2fads.dts

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17 09:40:48 -05:00

prpmc2800.dts

[POWERPC] mv643xx_eth: Prepare to support multiple silicon blocks

2008-04-15 21:21:24 +10:00

ps3.dts

[POWERPC] PS3: Device tree source

2007-06-28 19:18:02 +10:00

rainier.dts

[POWERPC] 4xx: Change dts files to support jumbo frames

2008-04-05 09:32:37 -05:00

sbc8349.dts

[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.

2008-01-28 16:16:38 -06:00

sbc8548.dts

[POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting

2008-05-13 08:53:48 -05:00

sbc8560.dts

[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 board

2008-01-28 08:30:47 -06:00

sbc8641d.dts

[POWERPC] 86xx: Add device tree source for Wind River SBC8641D

2008-04-17 01:01:41 -05:00

sequoia.dts

[POWERPC] 4xx: Fix PCI mem in sequoia DTS

2008-05-06 12:37:15 -05:00

storcenter.dts

[POWERPC] Fix storcenter DTS typos, feedback, IRQs.

2008-02-05 23:33:46 -06:00

stx_gp3_8560.dts

[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx

2008-01-28 08:32:53 -06:00

taishan.dts

[POWERPC] 4xx: Change dts files to support jumbo frames

2008-04-05 09:32:37 -05:00

tqm5200.dts

[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format

2008-04-29 07:19:07 -06:00

tqm8540.dts

[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx

2008-01-28 08:32:53 -06:00

tqm8541.dts

[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx

2008-01-28 08:32:53 -06:00

tqm8555.dts

[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx

2008-01-28 08:32:53 -06:00

tqm8560.dts

[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx

2008-01-28 08:32:53 -06:00

walnut.dts

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

warp.dts

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

yosemite.dts

[POWERPC] 4xx: Add AMCC 440EP Yosemite DTS

2008-03-26 07:19:17 -05:00