Files
linux/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
Chris Morgan e41fef1e43 dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible
The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel.
It's based on the ST7703 LCD controller just like rocktech,jh057n00900.
It's used in a 2nd revision of the Anbernic RG353V handheld gaming
device. Like the first revision of the RG353V the control chip is known
but the panel itself is unknown, so name it for the device.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426143213.4178586-2-macroalpha82@gmail.com
2023-04-27 13:44:06 +02:00

72 lines
1.5 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
maintainers:
- Ondrej Jirman <megi@xff.cz>
- Guido Gŭnther <agx@sigxcpu.org>
description:
Rocktech JH057N00900 is a 720x1440 TFT LCD panel
connected using a MIPI-DSI video interface.
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
enum:
# Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
- anbernic,rg353v-panel-v2
# Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
- rocktech,jh057n00900
# Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
- xingbangda,xbd599
port: true
reg:
maxItems: 1
description: DSI virtual channel
vcc-supply:
description: Panel power supply
iovcc-supply:
description: I/O voltage supply
reset-gpios: true
backlight: true
required:
- compatible
- reg
- vcc-supply
- iovcc-supply
- reset-gpios
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
dsi {
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "rocktech,jh057n00900";
reg = <0>;
vcc-supply = <&reg_2v8_p>;
iovcc-supply = <&reg_1v8_p>;
reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
backlight = <&backlight>;
};
};
...