mirror of
https://github.com/torvalds/linux.git
synced 2026-04-19 15:24:02 -04:00
b3827c91cc
This patch moves netconsole selftests from drivers/net to its own target in drivers/net/netconsole. This change helps saving some resources from CI since tests in drivers/net automatically run against real hardware which are not used by netconsole tests as they rely solely on netdevsim. lib_netcons.sh is kept under drivers/net/lib since it is also used by bonding selftests. Finally, drivers/net config remains unchanged as netpoll_basic.py requires netconsole (and does leverage real HW testing). Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Andre Carvalho <asantostc@gmail.com> Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
125 lines
3.7 KiB
Bash
Executable File
125 lines
3.7 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
# This test validates that netconsole is able to resume a target that was
|
|
# deactivated when its interface was removed when the interface is brought
|
|
# back up.
|
|
#
|
|
# The test configures a netconsole target and then removes netdevsim module to
|
|
# cause the interface to disappear. Targets are configured via cmdline to ensure
|
|
# targets bound by interface name and mac address can be resumed.
|
|
# The test verifies that the target moved to disabled state before adding
|
|
# netdevsim and the interface back.
|
|
#
|
|
# Finally, the test verifies that the target is re-enabled automatically and
|
|
# the message is received on the destination interface.
|
|
#
|
|
# Author: Andre Carvalho <asantostc@gmail.com>
|
|
|
|
set -euo pipefail
|
|
|
|
SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
|
|
|
|
source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
|
|
|
|
SAVED_SRCMAC="" # to be populated later
|
|
SAVED_DSTMAC="" # to be populated later
|
|
|
|
modprobe netdevsim 2> /dev/null || true
|
|
rmmod netconsole 2> /dev/null || true
|
|
|
|
check_netconsole_module
|
|
|
|
function cleanup() {
|
|
cleanup_netcons "${NETCONS_CONFIGFS}/cmdline0"
|
|
do_cleanup
|
|
rmmod netconsole
|
|
}
|
|
|
|
function trigger_reactivation() {
|
|
# Add back low level module
|
|
modprobe netdevsim
|
|
# Recreate namespace and two interfaces
|
|
set_network
|
|
# Restore MACs
|
|
ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" \
|
|
address "${SAVED_DSTMAC}"
|
|
if [ "${BINDMODE}" == "mac" ]; then
|
|
ip link set dev "${SRCIF}" down
|
|
ip link set dev "${SRCIF}" address "${SAVED_SRCMAC}"
|
|
# Rename device in order to trigger target resume, as initial
|
|
# when device was recreated it didn't have correct mac address.
|
|
ip link set dev "${SRCIF}" name "${TARGET}"
|
|
fi
|
|
}
|
|
|
|
function trigger_deactivation() {
|
|
# Start by storing mac addresses so we can be restored in reactivate
|
|
SAVED_DSTMAC=$(ip netns exec "${NAMESPACE}" \
|
|
cat /sys/class/net/"$DSTIF"/address)
|
|
SAVED_SRCMAC=$(mac_get "${SRCIF}")
|
|
# Remove low level module
|
|
rmmod netdevsim
|
|
}
|
|
|
|
trap cleanup EXIT
|
|
|
|
# Run the test twice, with different cmdline parameters
|
|
for BINDMODE in "ifname" "mac"
|
|
do
|
|
echo "Running with bind mode: ${BINDMODE}" >&2
|
|
# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5)
|
|
echo "6 5" > /proc/sys/kernel/printk
|
|
|
|
# Create one namespace and two interfaces
|
|
set_network
|
|
|
|
# Create the command line for netconsole, with the configuration from
|
|
# the function above
|
|
CMDLINE=$(create_cmdline_str "${BINDMODE}")
|
|
|
|
# The content of kmsg will be save to the following file
|
|
OUTPUT_FILE="/tmp/${TARGET}-${BINDMODE}"
|
|
|
|
# Load the module, with the cmdline set
|
|
modprobe netconsole "${CMDLINE}"
|
|
# Expose cmdline target in configfs
|
|
mkdir "${NETCONS_CONFIGFS}/cmdline0"
|
|
|
|
# Target should be enabled
|
|
wait_target_state "cmdline0" "enabled"
|
|
|
|
# Trigger deactivation by unloading netdevsim module. Target should be
|
|
# disabled.
|
|
trigger_deactivation
|
|
wait_target_state "cmdline0" "disabled"
|
|
|
|
# Trigger reactivation by loading netdevsim, recreating the network and
|
|
# restoring mac addresses. Target should be re-enabled.
|
|
trigger_reactivation
|
|
wait_target_state "cmdline0" "enabled"
|
|
|
|
# Listen for netconsole port inside the namespace and destination
|
|
# interface
|
|
listen_port_and_save_to "${OUTPUT_FILE}" &
|
|
# Wait for socat to start and listen to the port.
|
|
wait_local_port_listen "${NAMESPACE}" "${PORT}" udp
|
|
# Send the message
|
|
echo "${MSG}: ${TARGET}" > /dev/kmsg
|
|
# Wait until socat saves the file to disk
|
|
busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
|
|
# Make sure the message was received in the dst part
|
|
# and exit
|
|
validate_msg "${OUTPUT_FILE}"
|
|
|
|
# kill socat in case it is still running
|
|
pkill_socat
|
|
# Cleanup & unload the module
|
|
cleanup
|
|
|
|
echo "${BINDMODE} : Test passed" >&2
|
|
done
|
|
|
|
trap - EXIT
|
|
exit "${EXIT_STATUS}"
|