linux/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml

# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip KSZ Series Ethernet switches

maintainers:
  - Marek Vasut <marex@denx.de>
  - Woojung Huh <Woojung.Huh@microchip.com>

properties:
  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
  # required and optional properties.
  compatible:
    enum:
      - microchip,ksz8463
      - microchip,ksz8765
      - microchip,ksz8794
      - microchip,ksz8795
      - microchip,ksz8863
      - microchip,ksz8864  # 4-port version of KSZ8895 family switch
      - microchip,ksz8873
      - microchip,ksz8895  # 5-port version of KSZ8895 family switch
      - microchip,ksz9477
      - microchip,ksz9897
      - microchip,ksz9896
      - microchip,ksz9567
      - microchip,ksz8565
      - microchip,ksz9893
      - microchip,ksz9563
      - microchip,ksz8563
      - microchip,ksz8567
      - microchip,lan9646

  pinctrl-names:
    items:
      - const: default
      - const: reset
        description:
          Used during reset for strap configuration.

  reset-gpios:
    description:
      Should be a gpio specifier for a reset line.
    maxItems: 1

  wakeup-source: true

  microchip,synclko-125:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.

  microchip,synclko-disable:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Set if the output SYNCLKO clock should be disabled. Do not mix with
      microchip,synclko-125.

  microchip,pme-active-high:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Indicates if the PME pin polarity is active-high.

  microchip,io-drive-strength-microamp:
    description:
      IO Pad Drive Strength
    enum: [8000, 16000]
    default: 16000

  microchip,hi-drive-strength-microamp:
    description:
      High Speed Drive Strength. Controls drive strength of GMII / RGMII /
      MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines.
    enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000]
    default: 24000

  microchip,lo-drive-strength-microamp:
    description:
      Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI,
      COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines.
    enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000]
    default: 8000

  interrupts:
    maxItems: 1

  mdio:
    $ref: /schemas/net/mdio.yaml#
    unevaluatedProperties: false
    properties:
      mdio-parent-bus:
        $ref: /schemas/types.yaml#/definitions/phandle
        description:
          Phandle pointing to the MDIO bus controller connected to the
          secondary MDIO interface. This property should be used when
          the internal MDIO bus is accessed via a secondary MDIO
          interface rather than the primary management interface.

    patternProperties:
      "^ethernet-phy@[0-9a-f]$":
        type: object
        $ref: /schemas/net/ethernet-phy.yaml#
        unevaluatedProperties: false
        description:
          Integrated PHY node

required:
  - compatible
  - reg

allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#

  - if:
      not:
        properties:
          compatible:
            enum:
              - microchip,ksz8863
              - microchip,ksz8873
    then:
      $ref: dsa.yaml#/$defs/ethernet-ports
    else:
      patternProperties:
        "^(ethernet-)?ports$":
          patternProperties:
            "^(ethernet-)?port@[0-2]$":
              $ref: dsa-port.yaml#
              unevaluatedProperties: false
              properties:
                microchip,rmii-clk-internal:
                  $ref: /schemas/types.yaml#/definitions/flag
                  description:
                    When ksz88x3 is acting as clock provier (via REFCLKO) it
                    can select between internal and external RMII reference
                    clock. Internal reference clock means that the clock for
                    the RMII of ksz88x3 is provided by the ksz88x3 internally
                    and the REFCLKI pin is unconnected. For the external
                    reference clock, the clock needs to be fed back to ksz88x3
                    via REFCLKI.
                    If microchip,rmii-clk-internal is set, ksz88x3 will provide
                    rmii reference clock internally, otherwise reference clock
                    should be provided externally.
              dependencies:
                microchip,rmii-clk-internal: [ethernet]
  - if:
      properties:
        compatible:
          contains:
            const: microchip,ksz8463
    then:
      properties:
        straps-rxd-gpios:
          description:
            RXD0 and RXD1 pins, used to select SPI as bus interface.
          minItems: 2
          maxItems: 2

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
    eth0 {
        fixed-link {
            speed = <1000>;
            full-duplex;
        };
    };

    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        pinctrl-0 = <&pinctrl_spi_ksz>;
        cs-gpios = <&pioC 25 0>;

        ksz9477: switch@0 {
            compatible = "microchip,ksz9477";
            reg = <0>;
            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;

            spi-max-frequency = <44000000>;

            ethernet-ports {
                #address-cells = <1>;
                #size-cells = <0>;
                port@0 {
                    reg = <0>;
                    label = "lan1";
                };
                port@1 {
                    reg = <1>;
                    label = "lan2";
                };
                port@2 {
                    reg = <2>;
                    label = "lan3";
                };
                port@3 {
                    reg = <3>;
                    label = "lan4";
                };
                port@4 {
                    reg = <4>;
                    label = "lan5";
                };
                port@5 {
                    reg = <5>;
                    ethernet = <&eth0>;
                    phy-mode = "rgmii";

                    fixed-link {
                        speed = <1000>;
                        full-duplex;
                    };
                };
            };
        };

        ksz8565: switch@1 {
            compatible = "microchip,ksz8565";
            reg = <1>;

            spi-max-frequency = <44000000>;

            ethernet-ports {
                #address-cells = <1>;
                #size-cells = <0>;
                port@0 {
                    reg = <0>;
                    label = "lan1";
                };
                port@1 {
                    reg = <1>;
                    label = "lan2";
                };
                port@2 {
                    reg = <2>;
                    label = "lan3";
                };
                port@3 {
                    reg = <3>;
                    label = "lan4";
                };
                port@6 {
                    reg = <6>;
                    ethernet = <&eth0>;
                    phy-mode = "rgmii";

                    fixed-link {
                        speed = <1000>;
                        full-duplex;
                    };
                };
            };
        };
    };
...