mirror of
https://github.com/torvalds/linux.git
synced 2026-05-01 21:12:29 -04:00
caaeb8c551
Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present for any node. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230925212713.1975800-1-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
126 lines
4.4 KiB
YAML
126 lines
4.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. MDM9607 TLMM block
|
|
|
|
maintainers:
|
|
- Konrad Dybcio <konrad.dybcio@somainline.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,mdm9607-tlmm
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
gpio-reserved-ranges: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-mdm9607-tlmm-state"
|
|
- additionalProperties: false
|
|
patternProperties:
|
|
".*":
|
|
$ref: "#/$defs/qcom-mdm9607-tlmm-state"
|
|
|
|
$defs:
|
|
qcom-mdm9607-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
|
|
sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
|
|
qdsd_data3 ]
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
|
|
atest_char1, atest_char2, atest_char3,
|
|
atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native,
|
|
atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b,
|
|
bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi,
|
|
blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
|
|
blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4,
|
|
blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3,
|
|
blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2,
|
|
codec_int, codec_rst, coex_uart, cri_trng, cri_trng0,
|
|
cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b,
|
|
ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst,
|
|
gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b,
|
|
gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio,
|
|
gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync,
|
|
nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a,
|
|
nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2,
|
|
pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a,
|
|
pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a,
|
|
ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
|
|
pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
|
|
pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
|
|
qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
|
|
qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
|
|
qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
|
|
qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1,
|
|
rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2,
|
|
sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int,
|
|
uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
|
|
uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,mdm9607-tlmm";
|
|
reg = <0x01000000 0x300000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&msmgpio 0 0 80>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|