mirror of
https://github.com/torvalds/linux.git
synced 2026-04-19 07:13:56 -04:00
f034a15105
Add st,stm32mp25-spi compatible in dt-bindings. STM32MP25 spi is similar
to the STM32H7 except for the following two points:
- Burst should not be enabled with the new DMA used on STM32MP25.
- STM32MP25 SPI8 has a limited feature set, it can only send words of
8 or 16 bits and with a maximum words number of 1024.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20231218155721.359198-3-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
83 lines
1.9 KiB
YAML
83 lines
1.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics STM32 SPI Controller
|
|
|
|
description: |
|
|
The STM32 SPI controller is used to communicate with external devices using
|
|
the Serial Peripheral Interface. It supports full-duplex, half-duplex and
|
|
simplex synchronous serial communication with external devices. It supports
|
|
from 4 to 32-bit data size.
|
|
|
|
maintainers:
|
|
- Erwan Leray <erwan.leray@foss.st.com>
|
|
- Fabrice Gasnier <fabrice.gasnier@foss.st.com>
|
|
|
|
allOf:
|
|
- $ref: spi-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- st,stm32f4-spi
|
|
- st,stm32f7-spi
|
|
- st,stm32h7-spi
|
|
- st,stm32mp25-spi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
dmas:
|
|
description: |
|
|
DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
|
|
the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
|
|
items:
|
|
- description: rx DMA channel
|
|
- description: tx DMA channel
|
|
|
|
dma-names:
|
|
items:
|
|
- const: rx
|
|
- const: tx
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- interrupts
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
spi@4000b000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x4000b000 0x400>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI2_K>;
|
|
resets = <&rcc SPI2_R>;
|
|
dmas = <&dmamux1 0 39 0x400 0x05>,
|
|
<&dmamux1 1 40 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
cs-gpios = <&gpioa 11 0>;
|
|
};
|
|
|
|
...
|