mirror of
https://github.com/torvalds/linux.git
synced 2026-04-18 14:53:58 -04:00
0387040b31
Device can be used over I2C bus, so it documents 'reg' property, however it misses to constrain it to actual I2C address. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250820-dt-bindings-display-v2-2-91e2ccba3d4e@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
59 lines
1.3 KiB
YAML
59 lines
1.3 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/ti,tdp158.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TI TDP158 HDMI to TMDS Redriver
|
|
|
|
maintainers:
|
|
- Arnaud Vrac <avrac@freebox.fr>
|
|
- Pierre-Hugues Husson <phhusson@freebox.fr>
|
|
|
|
properties:
|
|
compatible:
|
|
const: ti,tdp158
|
|
|
|
# The reg property is required if and only if the device is connected
|
|
# to an I2C bus. In pin strap mode, reg must not be specified.
|
|
reg:
|
|
maxItems: 1
|
|
description: I2C address of the device
|
|
|
|
# Pin 36 = Operation Enable / Reset Pin
|
|
# OE = L: Power Down Mode
|
|
# OE = H: Normal Operation
|
|
# Internal weak pullup - device resets on H to L transitions
|
|
enable-gpios:
|
|
description: GPIO controlling bridge enable
|
|
|
|
vcc-supply:
|
|
description: Power supply 3.3V
|
|
|
|
vdd-supply:
|
|
description: Power supply 1.1V
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: Bridge input
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: Bridge output
|
|
|
|
required:
|
|
- port@0
|
|
- port@1
|
|
|
|
required:
|
|
- compatible
|
|
- vcc-supply
|
|
- vdd-supply
|
|
- ports
|
|
|
|
additionalProperties: false
|