Files
linux/drivers/iio/accel/fxls8962af-core.c
Greg Kroah-Hartman 0ca7cb7089 Merge tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:

IIO: New device support, features and cleanup for 6.16 - take 2

Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.

There is a known merge conflict due to changes in neighbouring lines.

Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/

Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics.  Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!

Includes the usual mix of new device support, features and general
cleanup.

This time we also have some tree wide changes.

- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
  with.  This series includes quite a few related cleanups such as use
  of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
  iio_device_claim/release_direct() which is structured so that sparse
  can warn on failed releases. There were a few false positives but
  those were mostly in code that benefited from being cleaned up as part
  of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
  version over time. This version takes the size of the supplied buffer
  which the core checks is at least as big as expected by calculation
  from channel descriptions of those channels enabled. Use this in
  an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
  IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
  correctly aligned buffers for timestamps being added onto the end of
  channel data.

New device support
------------------

adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
  programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
  fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
  channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
  MT8173.
meson-saradc
- Support the GXLX SoCs.  Mostly this is a workaround for some unrelated
  clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
  functionality of the already supported bd79703.  Included making this
  driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.

Features
--------

Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
  Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
  bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
  and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
  things like generated ramps for testing purposes. Enable this for
  adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
  documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
  Get the interrupt by name, but fallback to previous assumption on the first
  being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
  parts already supported by this driver. Includes some general driver
  cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
  the supply.
winsen,mhz19b
- New driver for this C02 sensor.

Cleanup and minor fixes
-----------------------

dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
  to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
  callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
  or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
  default anyway.

adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
  that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
  better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
  with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
  inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
  fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
  irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
  reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
  for a messy definition that has to work for all supported parts.
  Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
  given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
  for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
  devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
  inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.

* tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits)
  dt-bindings: iio: adc: Add ROHM BD79100G
  iio: adc: add support for Nuvoton NCT7201
  dt-bindings: iio: adc: add NCT7201 ADCs
  iio: chemical: Add driver for SEN0322
  dt-bindings: trivial-devices: Document SEN0322
  iio: adc: ad7768-1: reorganize driver headers
  iio: bmp280: zero-init buffer
  iio: ssp_sensors: optimalize -> optimize
  HID: sensor-hub: Fix typo and improve documentation
  iio: admv1013: replace redundant ternary operator with just len
  iio: chemical: mhz19b: Fix error code in probe()
  iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
  iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
  iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
  iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
  iio: make IIO_DMA_MINALIGN minimum of 8 bytes
  iio: pressure: zpa2326_spi: remove bits_per_word = 8
  iio: pressure: ms5611_spi: remove bits_per_word = 8
  ...
2025-05-22 15:54:52 +02:00

1317 lines
33 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0
/*
* NXP FXLS8962AF/FXLS8964AF Accelerometer Core Driver
*
* Copyright 2021 Connected Cars A/S
*
* Datasheet:
* https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
* https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
*
* Errata:
* https://www.nxp.com/docs/en/errata/ES_FXLS8962AF.pdf
*/
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/types.h>
#include <linux/units.h>
#include <linux/iio/buffer.h>
#include <linux/iio/events.h>
#include <linux/iio/iio.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/sysfs.h>
#include "fxls8962af.h"
#define FXLS8962AF_INT_STATUS 0x00
#define FXLS8962AF_INT_STATUS_SRC_BOOT BIT(0)
#define FXLS8962AF_INT_STATUS_SRC_SDCD_OT BIT(4)
#define FXLS8962AF_INT_STATUS_SRC_BUF BIT(5)
#define FXLS8962AF_INT_STATUS_SRC_DRDY BIT(7)
#define FXLS8962AF_TEMP_OUT 0x01
#define FXLS8962AF_VECM_LSB 0x02
#define FXLS8962AF_OUT_X_LSB 0x04
#define FXLS8962AF_OUT_Y_LSB 0x06
#define FXLS8962AF_OUT_Z_LSB 0x08
#define FXLS8962AF_BUF_STATUS 0x0b
#define FXLS8962AF_BUF_STATUS_BUF_CNT GENMASK(5, 0)
#define FXLS8962AF_BUF_STATUS_BUF_OVF BIT(6)
#define FXLS8962AF_BUF_STATUS_BUF_WMRK BIT(7)
#define FXLS8962AF_BUF_X_LSB 0x0c
#define FXLS8962AF_BUF_Y_LSB 0x0e
#define FXLS8962AF_BUF_Z_LSB 0x10
#define FXLS8962AF_PROD_REV 0x12
#define FXLS8962AF_WHO_AM_I 0x13
#define FXLS8962AF_SYS_MODE 0x14
#define FXLS8962AF_SENS_CONFIG1 0x15
#define FXLS8962AF_SENS_CONFIG1_ACTIVE BIT(0)
#define FXLS8962AF_SENS_CONFIG1_RST BIT(7)
#define FXLS8962AF_SC1_FSR_MASK GENMASK(2, 1)
#define FXLS8962AF_SC1_FSR_PREP(x) FIELD_PREP(FXLS8962AF_SC1_FSR_MASK, (x))
#define FXLS8962AF_SC1_FSR_GET(x) FIELD_GET(FXLS8962AF_SC1_FSR_MASK, (x))
#define FXLS8962AF_SENS_CONFIG2 0x16
#define FXLS8962AF_SENS_CONFIG3 0x17
#define FXLS8962AF_SC3_WAKE_ODR_MASK GENMASK(7, 4)
#define FXLS8962AF_SC3_WAKE_ODR_PREP(x) FIELD_PREP(FXLS8962AF_SC3_WAKE_ODR_MASK, (x))
#define FXLS8962AF_SC3_WAKE_ODR_GET(x) FIELD_GET(FXLS8962AF_SC3_WAKE_ODR_MASK, (x))
#define FXLS8962AF_SENS_CONFIG4 0x18
#define FXLS8962AF_SC4_INT_PP_OD_MASK BIT(1)
#define FXLS8962AF_SC4_INT_PP_OD_PREP(x) FIELD_PREP(FXLS8962AF_SC4_INT_PP_OD_MASK, (x))
#define FXLS8962AF_SC4_INT_POL_MASK BIT(0)
#define FXLS8962AF_SC4_INT_POL_PREP(x) FIELD_PREP(FXLS8962AF_SC4_INT_POL_MASK, (x))
#define FXLS8962AF_SENS_CONFIG5 0x19
#define FXLS8962AF_WAKE_IDLE_LSB 0x1b
#define FXLS8962AF_SLEEP_IDLE_LSB 0x1c
#define FXLS8962AF_ASLP_COUNT_LSB 0x1e
#define FXLS8962AF_INT_EN 0x20
#define FXLS8962AF_INT_EN_SDCD_OT_EN BIT(5)
#define FXLS8962AF_INT_EN_BUF_EN BIT(6)
#define FXLS8962AF_INT_PIN_SEL 0x21
#define FXLS8962AF_INT_PIN_SEL_MASK GENMASK(7, 0)
#define FXLS8962AF_INT_PIN_SEL_INT1 0x00
#define FXLS8962AF_INT_PIN_SEL_INT2 GENMASK(7, 0)
#define FXLS8962AF_OFF_X 0x22
#define FXLS8962AF_OFF_Y 0x23
#define FXLS8962AF_OFF_Z 0x24
#define FXLS8962AF_BUF_CONFIG1 0x26
#define FXLS8962AF_BC1_BUF_MODE_MASK GENMASK(6, 5)
#define FXLS8962AF_BC1_BUF_MODE_PREP(x) FIELD_PREP(FXLS8962AF_BC1_BUF_MODE_MASK, (x))
#define FXLS8962AF_BUF_CONFIG2 0x27
#define FXLS8962AF_BUF_CONFIG2_BUF_WMRK GENMASK(5, 0)
#define FXLS8962AF_ORIENT_STATUS 0x28
#define FXLS8962AF_ORIENT_CONFIG 0x29
#define FXLS8962AF_ORIENT_DBCOUNT 0x2a
#define FXLS8962AF_ORIENT_BF_ZCOMP 0x2b
#define FXLS8962AF_ORIENT_THS_REG 0x2c
#define FXLS8962AF_SDCD_INT_SRC1 0x2d
#define FXLS8962AF_SDCD_INT_SRC1_X_OT BIT(5)
#define FXLS8962AF_SDCD_INT_SRC1_X_POL BIT(4)
#define FXLS8962AF_SDCD_INT_SRC1_Y_OT BIT(3)
#define FXLS8962AF_SDCD_INT_SRC1_Y_POL BIT(2)
#define FXLS8962AF_SDCD_INT_SRC1_Z_OT BIT(1)
#define FXLS8962AF_SDCD_INT_SRC1_Z_POL BIT(0)
#define FXLS8962AF_SDCD_INT_SRC2 0x2e
#define FXLS8962AF_SDCD_CONFIG1 0x2f
#define FXLS8962AF_SDCD_CONFIG1_Z_OT_EN BIT(3)
#define FXLS8962AF_SDCD_CONFIG1_Y_OT_EN BIT(4)
#define FXLS8962AF_SDCD_CONFIG1_X_OT_EN BIT(5)
#define FXLS8962AF_SDCD_CONFIG1_OT_ELE BIT(7)
#define FXLS8962AF_SDCD_CONFIG2 0x30
#define FXLS8962AF_SDCD_CONFIG2_SDCD_EN BIT(7)
#define FXLS8962AF_SC2_REF_UPDM_AC GENMASK(6, 5)
#define FXLS8962AF_SDCD_OT_DBCNT 0x31
#define FXLS8962AF_SDCD_WT_DBCNT 0x32
#define FXLS8962AF_SDCD_LTHS_LSB 0x33
#define FXLS8962AF_SDCD_UTHS_LSB 0x35
#define FXLS8962AF_SELF_TEST_CONFIG1 0x37
#define FXLS8962AF_SELF_TEST_CONFIG2 0x38
#define FXLS8962AF_MAX_REG 0x38
#define FXLS8962AF_DEVICE_ID 0x62
#define FXLS8964AF_DEVICE_ID 0x84
#define FXLS8974CF_DEVICE_ID 0x86
#define FXLS8967AF_DEVICE_ID 0x87
/* Raw temp channel offset */
#define FXLS8962AF_TEMP_CENTER_VAL 25
#define FXLS8962AF_AUTO_SUSPEND_DELAY_MS 2000
#define FXLS8962AF_FIFO_LENGTH 32
#define FXLS8962AF_SCALE_TABLE_LEN 4
#define FXLS8962AF_SAMP_FREQ_TABLE_LEN 13
static const int fxls8962af_scale_table[FXLS8962AF_SCALE_TABLE_LEN][2] = {
{0, IIO_G_TO_M_S_2(980000)},
{0, IIO_G_TO_M_S_2(1950000)},
{0, IIO_G_TO_M_S_2(3910000)},
{0, IIO_G_TO_M_S_2(7810000)},
};
static const int fxls8962af_samp_freq_table[FXLS8962AF_SAMP_FREQ_TABLE_LEN][2] = {
{3200, 0}, {1600, 0}, {800, 0}, {400, 0}, {200, 0}, {100, 0},
{50, 0}, {25, 0}, {12, 500000}, {6, 250000}, {3, 125000},
{1, 563000}, {0, 781000},
};
struct fxls8962af_chip_info {
const char *name;
const struct iio_chan_spec *channels;
int num_channels;
u8 chip_id;
};
struct fxls8962af_data {
struct regmap *regmap;
const struct fxls8962af_chip_info *chip_info;
struct {
__le16 channels[3];
aligned_s64 ts;
} scan;
int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
struct iio_mount_matrix orientation;
int irq;
u8 watermark;
u8 enable_event;
u16 lower_thres;
u16 upper_thres;
};
const struct regmap_config fxls8962af_i2c_regmap_conf = {
.reg_bits = 8,
.val_bits = 8,
.max_register = FXLS8962AF_MAX_REG,
};
EXPORT_SYMBOL_NS_GPL(fxls8962af_i2c_regmap_conf, "IIO_FXLS8962AF");
const struct regmap_config fxls8962af_spi_regmap_conf = {
.reg_bits = 8,
.pad_bits = 8,
.val_bits = 8,
.max_register = FXLS8962AF_MAX_REG,
};
EXPORT_SYMBOL_NS_GPL(fxls8962af_spi_regmap_conf, "IIO_FXLS8962AF");
enum {
fxls8962af_idx_x,
fxls8962af_idx_y,
fxls8962af_idx_z,
fxls8962af_idx_ts,
};
enum fxls8962af_int_pin {
FXLS8962AF_PIN_INT1,
FXLS8962AF_PIN_INT2,
};
static int fxls8962af_power_on(struct fxls8962af_data *data)
{
struct device *dev = regmap_get_device(data->regmap);
int ret;
ret = pm_runtime_resume_and_get(dev);
if (ret)
dev_err(dev, "failed to power on\n");
return ret;
}
static int fxls8962af_power_off(struct fxls8962af_data *data)
{
struct device *dev = regmap_get_device(data->regmap);
int ret;
pm_runtime_mark_last_busy(dev);
ret = pm_runtime_put_autosuspend(dev);
if (ret)
dev_err(dev, "failed to power off\n");
return ret;
}
static int fxls8962af_standby(struct fxls8962af_data *data)
{
return regmap_clear_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
FXLS8962AF_SENS_CONFIG1_ACTIVE);
}
static int fxls8962af_active(struct fxls8962af_data *data)
{
return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
FXLS8962AF_SENS_CONFIG1_ACTIVE, 1);
}
static int fxls8962af_is_active(struct fxls8962af_data *data)
{
unsigned int reg;
int ret;
ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, &reg);
if (ret)
return ret;
return reg & FXLS8962AF_SENS_CONFIG1_ACTIVE;
}
static int fxls8962af_get_out(struct fxls8962af_data *data,
struct iio_chan_spec const *chan, int *val)
{
struct device *dev = regmap_get_device(data->regmap);
__le16 raw_val;
int is_active;
int ret;
is_active = fxls8962af_is_active(data);
if (!is_active) {
ret = fxls8962af_power_on(data);
if (ret)
return ret;
}
ret = regmap_bulk_read(data->regmap, chan->address,
&raw_val, sizeof(data->lower_thres));
if (!is_active)
fxls8962af_power_off(data);
if (ret) {
dev_err(dev, "failed to get out reg 0x%lx\n", chan->address);
return ret;
}
*val = sign_extend32(le16_to_cpu(raw_val),
chan->scan_type.realbits - 1);
return IIO_VAL_INT;
}
static int fxls8962af_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
switch (mask) {
case IIO_CHAN_INFO_SCALE:
*type = IIO_VAL_INT_PLUS_NANO;
*vals = (int *)fxls8962af_scale_table;
*length = ARRAY_SIZE(fxls8962af_scale_table) * 2;
return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_SAMP_FREQ:
*type = IIO_VAL_INT_PLUS_MICRO;
*vals = (int *)fxls8962af_samp_freq_table;
*length = ARRAY_SIZE(fxls8962af_samp_freq_table) * 2;
return IIO_AVAIL_LIST;
default:
return -EINVAL;
}
}
static int fxls8962af_write_raw_get_fmt(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
long mask)
{
switch (mask) {
case IIO_CHAN_INFO_SCALE:
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_SAMP_FREQ:
return IIO_VAL_INT_PLUS_MICRO;
default:
return IIO_VAL_INT_PLUS_NANO;
}
}
static int fxls8962af_update_config(struct fxls8962af_data *data, u8 reg,
u8 mask, u8 val)
{
int ret;
int is_active;
is_active = fxls8962af_is_active(data);
if (is_active) {
ret = fxls8962af_standby(data);
if (ret)
return ret;
}
ret = regmap_update_bits(data->regmap, reg, mask, val);
if (ret)
return ret;
if (is_active) {
ret = fxls8962af_active(data);
if (ret)
return ret;
}
return 0;
}
static int fxls8962af_set_full_scale(struct fxls8962af_data *data, u32 scale)
{
int i;
for (i = 0; i < ARRAY_SIZE(fxls8962af_scale_table); i++)
if (scale == fxls8962af_scale_table[i][1])
break;
if (i == ARRAY_SIZE(fxls8962af_scale_table))
return -EINVAL;
return fxls8962af_update_config(data, FXLS8962AF_SENS_CONFIG1,
FXLS8962AF_SC1_FSR_MASK,
FXLS8962AF_SC1_FSR_PREP(i));
}
static unsigned int fxls8962af_read_full_scale(struct fxls8962af_data *data,
int *val)
{
int ret;
unsigned int reg;
u8 range_idx;
ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, &reg);
if (ret)
return ret;
range_idx = FXLS8962AF_SC1_FSR_GET(reg);
*val = fxls8962af_scale_table[range_idx][1];
return IIO_VAL_INT_PLUS_NANO;
}
static int fxls8962af_set_samp_freq(struct fxls8962af_data *data, u32 val,
u32 val2)
{
int i;
for (i = 0; i < ARRAY_SIZE(fxls8962af_samp_freq_table); i++)
if (val == fxls8962af_samp_freq_table[i][0] &&
val2 == fxls8962af_samp_freq_table[i][1])
break;
if (i == ARRAY_SIZE(fxls8962af_samp_freq_table))
return -EINVAL;
return fxls8962af_update_config(data, FXLS8962AF_SENS_CONFIG3,
FXLS8962AF_SC3_WAKE_ODR_MASK,
FXLS8962AF_SC3_WAKE_ODR_PREP(i));
}
static unsigned int fxls8962af_read_samp_freq(struct fxls8962af_data *data,
int *val, int *val2)
{
int ret;
unsigned int reg;
u8 range_idx;
ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG3, &reg);
if (ret)
return ret;
range_idx = FXLS8962AF_SC3_WAKE_ODR_GET(reg);
*val = fxls8962af_samp_freq_table[range_idx][0];
*val2 = fxls8962af_samp_freq_table[range_idx][1];
return IIO_VAL_INT_PLUS_MICRO;
}
static int fxls8962af_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_TEMP:
case IIO_ACCEL:
return fxls8962af_get_out(data, chan, val);
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
if (chan->type != IIO_TEMP)
return -EINVAL;
*val = FXLS8962AF_TEMP_CENTER_VAL;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_TEMP:
*val = MILLIDEGREE_PER_DEGREE;
return IIO_VAL_INT;
case IIO_ACCEL:
*val = 0;
return fxls8962af_read_full_scale(data, val2);
default:
return -EINVAL;
}
case IIO_CHAN_INFO_SAMP_FREQ:
return fxls8962af_read_samp_freq(data, val, val2);
default:
return -EINVAL;
}
}
static int fxls8962af_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
if (val != 0)
return -EINVAL;
if (!iio_device_claim_direct(indio_dev))
return -EBUSY;
ret = fxls8962af_set_full_scale(data, val2);
iio_device_release_direct(indio_dev);
return ret;
case IIO_CHAN_INFO_SAMP_FREQ:
if (!iio_device_claim_direct(indio_dev))
return -EBUSY;
ret = fxls8962af_set_samp_freq(data, val, val2);
iio_device_release_direct(indio_dev);
return ret;
default:
return -EINVAL;
}
}
static int fxls8962af_event_setup(struct fxls8962af_data *data, int state)
{
/* Enable wakeup interrupt */
int mask = FXLS8962AF_INT_EN_SDCD_OT_EN;
int value = state ? mask : 0;
return regmap_update_bits(data->regmap, FXLS8962AF_INT_EN, mask, value);
}
static int fxls8962af_set_watermark(struct iio_dev *indio_dev, unsigned val)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
if (val > FXLS8962AF_FIFO_LENGTH)
val = FXLS8962AF_FIFO_LENGTH;
data->watermark = val;
return 0;
}
static int __fxls8962af_set_thresholds(struct fxls8962af_data *data,
const struct iio_chan_spec *chan,
enum iio_event_direction dir,
int val)
{
switch (dir) {
case IIO_EV_DIR_FALLING:
data->lower_thres = val;
return regmap_bulk_write(data->regmap, FXLS8962AF_SDCD_LTHS_LSB,
&data->lower_thres, sizeof(data->lower_thres));
case IIO_EV_DIR_RISING:
data->upper_thres = val;
return regmap_bulk_write(data->regmap, FXLS8962AF_SDCD_UTHS_LSB,
&data->upper_thres, sizeof(data->upper_thres));
default:
return -EINVAL;
}
}
static int fxls8962af_read_event(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info,
int *val, int *val2)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret;
if (type != IIO_EV_TYPE_THRESH)
return -EINVAL;
switch (dir) {
case IIO_EV_DIR_FALLING:
ret = regmap_bulk_read(data->regmap, FXLS8962AF_SDCD_LTHS_LSB,
&data->lower_thres, sizeof(data->lower_thres));
if (ret)
return ret;
*val = sign_extend32(data->lower_thres, chan->scan_type.realbits - 1);
return IIO_VAL_INT;
case IIO_EV_DIR_RISING:
ret = regmap_bulk_read(data->regmap, FXLS8962AF_SDCD_UTHS_LSB,
&data->upper_thres, sizeof(data->upper_thres));
if (ret)
return ret;
*val = sign_extend32(data->upper_thres, chan->scan_type.realbits - 1);
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
static int fxls8962af_write_event(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info,
int val, int val2)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret, val_masked;
if (type != IIO_EV_TYPE_THRESH)
return -EINVAL;
if (val < -2048 || val > 2047)
return -EINVAL;
if (data->enable_event)
return -EBUSY;
val_masked = val & GENMASK(11, 0);
if (fxls8962af_is_active(data)) {
ret = fxls8962af_standby(data);
if (ret)
return ret;
ret = __fxls8962af_set_thresholds(data, chan, dir, val_masked);
if (ret)
return ret;
return fxls8962af_active(data);
} else {
return __fxls8962af_set_thresholds(data, chan, dir, val_masked);
}
}
static int
fxls8962af_read_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
if (type != IIO_EV_TYPE_THRESH)
return -EINVAL;
switch (chan->channel2) {
case IIO_MOD_X:
return !!(FXLS8962AF_SDCD_CONFIG1_X_OT_EN & data->enable_event);
case IIO_MOD_Y:
return !!(FXLS8962AF_SDCD_CONFIG1_Y_OT_EN & data->enable_event);
case IIO_MOD_Z:
return !!(FXLS8962AF_SDCD_CONFIG1_Z_OT_EN & data->enable_event);
default:
return -EINVAL;
}
}
static int
fxls8962af_write_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir, bool state)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
u8 enable_event, enable_bits;
int ret, value;
if (type != IIO_EV_TYPE_THRESH)
return -EINVAL;
switch (chan->channel2) {
case IIO_MOD_X:
enable_bits = FXLS8962AF_SDCD_CONFIG1_X_OT_EN;
break;
case IIO_MOD_Y:
enable_bits = FXLS8962AF_SDCD_CONFIG1_Y_OT_EN;
break;
case IIO_MOD_Z:
enable_bits = FXLS8962AF_SDCD_CONFIG1_Z_OT_EN;
break;
default:
return -EINVAL;
}
if (state)
enable_event = data->enable_event | enable_bits;
else
enable_event = data->enable_event & ~enable_bits;
if (data->enable_event == enable_event)
return 0;
ret = fxls8962af_standby(data);
if (ret)
return ret;
/* Enable events */
value = enable_event | FXLS8962AF_SDCD_CONFIG1_OT_ELE;
ret = regmap_write(data->regmap, FXLS8962AF_SDCD_CONFIG1, value);
if (ret)
return ret;
/*
* Enable update of SDCD_REF_X/Y/Z values with the current decimated and
* trimmed X/Y/Z acceleration input data. This allows for acceleration
* slope detection with Data(n) to Data(n1) always used as the input
* to the window comparator.
*/
value = enable_event ?
FXLS8962AF_SDCD_CONFIG2_SDCD_EN | FXLS8962AF_SC2_REF_UPDM_AC :
0x00;
ret = regmap_write(data->regmap, FXLS8962AF_SDCD_CONFIG2, value);
if (ret)
return ret;
ret = fxls8962af_event_setup(data, state);
if (ret)
return ret;
data->enable_event = enable_event;
if (data->enable_event) {
fxls8962af_active(data);
ret = fxls8962af_power_on(data);
} else {
if (!iio_device_claim_direct(indio_dev))
return -EBUSY;
/* Not in buffered mode so disable power */
ret = fxls8962af_power_off(data);
iio_device_release_direct(indio_dev);
}
return ret;
}
static const struct iio_event_spec fxls8962af_event[] = {
{
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
},
{
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_FALLING,
.mask_separate = BIT(IIO_EV_INFO_VALUE),
},
{
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_RISING,
.mask_separate = BIT(IIO_EV_INFO_VALUE),
},
};
#define FXLS8962AF_CHANNEL(axis, reg, idx) { \
.type = IIO_ACCEL, \
.address = reg, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = idx, \
.scan_type = { \
.sign = 's', \
.realbits = 12, \
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
.event_spec = fxls8962af_event, \
.num_event_specs = ARRAY_SIZE(fxls8962af_event), \
}
#define FXLS8962AF_TEMP_CHANNEL { \
.type = IIO_TEMP, \
.address = FXLS8962AF_TEMP_OUT, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_OFFSET),\
.scan_index = -1, \
.scan_type = { \
.sign = 's', \
.realbits = 8, \
.storagebits = 8, \
}, \
}
static const struct iio_chan_spec fxls8962af_channels[] = {
FXLS8962AF_CHANNEL(X, FXLS8962AF_OUT_X_LSB, fxls8962af_idx_x),
FXLS8962AF_CHANNEL(Y, FXLS8962AF_OUT_Y_LSB, fxls8962af_idx_y),
FXLS8962AF_CHANNEL(Z, FXLS8962AF_OUT_Z_LSB, fxls8962af_idx_z),
IIO_CHAN_SOFT_TIMESTAMP(fxls8962af_idx_ts),
FXLS8962AF_TEMP_CHANNEL,
};
static const struct fxls8962af_chip_info fxls_chip_info_table[] = {
[fxls8962af] = {
.chip_id = FXLS8962AF_DEVICE_ID,
.name = "fxls8962af",
.channels = fxls8962af_channels,
.num_channels = ARRAY_SIZE(fxls8962af_channels),
},
[fxls8964af] = {
.chip_id = FXLS8964AF_DEVICE_ID,
.name = "fxls8964af",
.channels = fxls8962af_channels,
.num_channels = ARRAY_SIZE(fxls8962af_channels),
},
[fxls8967af] = {
.chip_id = FXLS8967AF_DEVICE_ID,
.name = "fxls8967af",
.channels = fxls8962af_channels,
.num_channels = ARRAY_SIZE(fxls8962af_channels),
},
[fxls8974cf] = {
.chip_id = FXLS8974CF_DEVICE_ID,
.name = "fxls8974cf",
.channels = fxls8962af_channels,
.num_channels = ARRAY_SIZE(fxls8962af_channels),
},
};
static const struct iio_info fxls8962af_info = {
.read_raw = &fxls8962af_read_raw,
.write_raw = &fxls8962af_write_raw,
.write_raw_get_fmt = fxls8962af_write_raw_get_fmt,
.read_event_value = fxls8962af_read_event,
.write_event_value = fxls8962af_write_event,
.read_event_config = fxls8962af_read_event_config,
.write_event_config = fxls8962af_write_event_config,
.read_avail = fxls8962af_read_avail,
.hwfifo_set_watermark = fxls8962af_set_watermark,
};
static int fxls8962af_reset(struct fxls8962af_data *data)
{
struct device *dev = regmap_get_device(data->regmap);
unsigned int reg;
int ret;
ret = regmap_set_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
FXLS8962AF_SENS_CONFIG1_RST);
if (ret)
return ret;
/* TBOOT1, TBOOT2, specifies we have to wait between 1 - 17.7ms */
ret = regmap_read_poll_timeout(data->regmap, FXLS8962AF_INT_STATUS, reg,
(reg & FXLS8962AF_INT_STATUS_SRC_BOOT),
1000, 18000);
if (ret == -ETIMEDOUT)
dev_err(dev, "reset timeout, int_status = 0x%x\n", reg);
return ret;
}
static int __fxls8962af_fifo_set_mode(struct fxls8962af_data *data, bool onoff)
{
int ret;
/* Enable watermark at max fifo size */
ret = regmap_update_bits(data->regmap, FXLS8962AF_BUF_CONFIG2,
FXLS8962AF_BUF_CONFIG2_BUF_WMRK,
data->watermark);
if (ret)
return ret;
return regmap_update_bits(data->regmap, FXLS8962AF_BUF_CONFIG1,
FXLS8962AF_BC1_BUF_MODE_MASK,
FXLS8962AF_BC1_BUF_MODE_PREP(onoff));
}
static int fxls8962af_buffer_preenable(struct iio_dev *indio_dev)
{
return fxls8962af_power_on(iio_priv(indio_dev));
}
static int fxls8962af_buffer_postenable(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret;
fxls8962af_standby(data);
/* Enable buffer interrupt */
ret = regmap_set_bits(data->regmap, FXLS8962AF_INT_EN,
FXLS8962AF_INT_EN_BUF_EN);
if (ret)
return ret;
ret = __fxls8962af_fifo_set_mode(data, true);
fxls8962af_active(data);
return ret;
}
static int fxls8962af_buffer_predisable(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret;
fxls8962af_standby(data);
/* Disable buffer interrupt */
ret = regmap_clear_bits(data->regmap, FXLS8962AF_INT_EN,
FXLS8962AF_INT_EN_BUF_EN);
if (ret)
return ret;
ret = __fxls8962af_fifo_set_mode(data, false);
if (data->enable_event)
fxls8962af_active(data);
return ret;
}
static int fxls8962af_buffer_postdisable(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
if (!data->enable_event)
fxls8962af_power_off(data);
return 0;
}
static const struct iio_buffer_setup_ops fxls8962af_buffer_ops = {
.preenable = fxls8962af_buffer_preenable,
.postenable = fxls8962af_buffer_postenable,
.predisable = fxls8962af_buffer_predisable,
.postdisable = fxls8962af_buffer_postdisable,
};
static int fxls8962af_i2c_raw_read_errata3(struct fxls8962af_data *data,
u16 *buffer, int samples,
int sample_length)
{
int i, ret;
for (i = 0; i < samples; i++) {
ret = regmap_raw_read(data->regmap, FXLS8962AF_BUF_X_LSB,
&buffer[i * 3], sample_length);
if (ret)
return ret;
}
return 0;
}
static int fxls8962af_fifo_transfer(struct fxls8962af_data *data,
u16 *buffer, int samples)
{
struct device *dev = regmap_get_device(data->regmap);
int sample_length = 3 * sizeof(*buffer);
int total_length = samples * sample_length;
int ret;
if (i2c_verify_client(dev) &&
data->chip_info->chip_id == FXLS8962AF_DEVICE_ID)
/*
* Due to errata bug (only applicable on fxls8962af):
* E3: FIFO burst read operation error using I2C interface
* We have to avoid burst reads on I2C..
*/
ret = fxls8962af_i2c_raw_read_errata3(data, buffer, samples,
sample_length);
else
ret = regmap_raw_read(data->regmap, FXLS8962AF_BUF_X_LSB, buffer,
total_length);
if (ret)
dev_err(dev, "Error transferring data from fifo: %d\n", ret);
return ret;
}
static int fxls8962af_fifo_flush(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
struct device *dev = regmap_get_device(data->regmap);
u16 buffer[FXLS8962AF_FIFO_LENGTH * 3];
uint64_t sample_period;
unsigned int reg;
int64_t tstamp;
int ret, i;
u8 count;
ret = regmap_read(data->regmap, FXLS8962AF_BUF_STATUS, &reg);
if (ret)
return ret;
if (reg & FXLS8962AF_BUF_STATUS_BUF_OVF) {
dev_err(dev, "Buffer overflow");
return -EOVERFLOW;
}
count = reg & FXLS8962AF_BUF_STATUS_BUF_CNT;
if (!count)
return 0;
data->old_timestamp = data->timestamp;
data->timestamp = iio_get_time_ns(indio_dev);
/*
* Approximate timestamps for each of the sample based on the sampling,
* frequency, timestamp for last sample and number of samples.
*/
sample_period = (data->timestamp - data->old_timestamp);
do_div(sample_period, count);
tstamp = data->timestamp - (count - 1) * sample_period;
ret = fxls8962af_fifo_transfer(data, buffer, count);
if (ret)
return ret;
/* Demux hw FIFO into kfifo. */
for (i = 0; i < count; i++) {
int j, bit;
j = 0;
iio_for_each_active_channel(indio_dev, bit) {
memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit],
sizeof(data->scan.channels[0]));
}
iio_push_to_buffers_with_ts(indio_dev, &data->scan,
sizeof(data->scan), tstamp);
tstamp += sample_period;
}
return count;
}
static int fxls8962af_event_interrupt(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
s64 ts = iio_get_time_ns(indio_dev);
unsigned int reg;
u64 ev_code;
int ret;
ret = regmap_read(data->regmap, FXLS8962AF_SDCD_INT_SRC1, &reg);
if (ret)
return ret;
if (reg & FXLS8962AF_SDCD_INT_SRC1_X_OT) {
ev_code = reg & FXLS8962AF_SDCD_INT_SRC1_X_POL ?
IIO_EV_DIR_RISING : IIO_EV_DIR_FALLING;
iio_push_event(indio_dev,
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
IIO_EV_TYPE_THRESH, ev_code), ts);
}
if (reg & FXLS8962AF_SDCD_INT_SRC1_Y_OT) {
ev_code = reg & FXLS8962AF_SDCD_INT_SRC1_Y_POL ?
IIO_EV_DIR_RISING : IIO_EV_DIR_FALLING;
iio_push_event(indio_dev,
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
IIO_EV_TYPE_THRESH, ev_code), ts);
}
if (reg & FXLS8962AF_SDCD_INT_SRC1_Z_OT) {
ev_code = reg & FXLS8962AF_SDCD_INT_SRC1_Z_POL ?
IIO_EV_DIR_RISING : IIO_EV_DIR_FALLING;
iio_push_event(indio_dev,
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
IIO_EV_TYPE_THRESH, ev_code), ts);
}
return 0;
}
static irqreturn_t fxls8962af_interrupt(int irq, void *p)
{
struct iio_dev *indio_dev = p;
struct fxls8962af_data *data = iio_priv(indio_dev);
unsigned int reg;
int ret;
ret = regmap_read(data->regmap, FXLS8962AF_INT_STATUS, &reg);
if (ret)
return IRQ_NONE;
if (reg & FXLS8962AF_INT_STATUS_SRC_BUF) {
ret = fxls8962af_fifo_flush(indio_dev);
if (ret < 0)
return IRQ_NONE;
return IRQ_HANDLED;
}
if (reg & FXLS8962AF_INT_STATUS_SRC_SDCD_OT) {
ret = fxls8962af_event_interrupt(indio_dev);
if (ret < 0)
return IRQ_NONE;
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static void fxls8962af_pm_disable(void *dev_ptr)
{
struct device *dev = dev_ptr;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
pm_runtime_put_noidle(dev);
fxls8962af_standby(iio_priv(indio_dev));
}
static void fxls8962af_get_irq(struct device *dev,
enum fxls8962af_int_pin *pin)
{
int irq;
irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT2");
if (irq > 0) {
*pin = FXLS8962AF_PIN_INT2;
return;
}
*pin = FXLS8962AF_PIN_INT1;
}
static int fxls8962af_irq_setup(struct iio_dev *indio_dev, int irq)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
struct device *dev = regmap_get_device(data->regmap);
unsigned long irq_type;
bool irq_active_high;
enum fxls8962af_int_pin int_pin;
u8 int_pin_sel;
int ret;
fxls8962af_get_irq(dev, &int_pin);
switch (int_pin) {
case FXLS8962AF_PIN_INT1:
int_pin_sel = FXLS8962AF_INT_PIN_SEL_INT1;
break;
case FXLS8962AF_PIN_INT2:
int_pin_sel = FXLS8962AF_INT_PIN_SEL_INT2;
break;
default:
dev_err(dev, "unsupported int pin selected\n");
return -EINVAL;
}
ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_PIN_SEL,
FXLS8962AF_INT_PIN_SEL_MASK, int_pin_sel);
if (ret)
return ret;
irq_type = irq_get_trigger_type(irq);
switch (irq_type) {
case IRQF_TRIGGER_HIGH:
case IRQF_TRIGGER_RISING:
irq_active_high = true;
break;
case IRQF_TRIGGER_LOW:
case IRQF_TRIGGER_FALLING:
irq_active_high = false;
break;
default:
dev_info(dev, "mode %lx unsupported\n", irq_type);
return -EINVAL;
}
ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG4,
FXLS8962AF_SC4_INT_POL_MASK,
FXLS8962AF_SC4_INT_POL_PREP(irq_active_high));
if (ret)
return ret;
if (device_property_read_bool(dev, "drive-open-drain")) {
ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG4,
FXLS8962AF_SC4_INT_PP_OD_MASK,
FXLS8962AF_SC4_INT_PP_OD_PREP(1));
if (ret)
return ret;
irq_type |= IRQF_SHARED;
}
return devm_request_threaded_irq(dev,
irq,
NULL, fxls8962af_interrupt,
irq_type | IRQF_ONESHOT,
indio_dev->name, indio_dev);
}
int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
{
struct fxls8962af_data *data;
struct iio_dev *indio_dev;
unsigned int reg;
int ret, i;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
dev_set_drvdata(dev, indio_dev);
data->regmap = regmap;
data->irq = irq;
ret = iio_read_mount_matrix(dev, &data->orientation);
if (ret)
return ret;
ret = devm_regulator_get_enable(dev, "vdd");
if (ret)
return dev_err_probe(dev, ret,
"Failed to get vdd regulator\n");
ret = regmap_read(data->regmap, FXLS8962AF_WHO_AM_I, &reg);
if (ret)
return ret;
for (i = 0; i < ARRAY_SIZE(fxls_chip_info_table); i++) {
if (fxls_chip_info_table[i].chip_id == reg) {
data->chip_info = &fxls_chip_info_table[i];
break;
}
}
if (i == ARRAY_SIZE(fxls_chip_info_table)) {
dev_err(dev, "failed to match device in table\n");
return -ENXIO;
}
indio_dev->channels = data->chip_info->channels;
indio_dev->num_channels = data->chip_info->num_channels;
indio_dev->name = data->chip_info->name;
indio_dev->info = &fxls8962af_info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = fxls8962af_reset(data);
if (ret)
return ret;
if (irq) {
ret = fxls8962af_irq_setup(indio_dev, irq);
if (ret)
return ret;
ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
&fxls8962af_buffer_ops);
if (ret)
return ret;
}
ret = pm_runtime_set_active(dev);
if (ret)
return ret;
pm_runtime_enable(dev);
pm_runtime_set_autosuspend_delay(dev, FXLS8962AF_AUTO_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
ret = devm_add_action_or_reset(dev, fxls8962af_pm_disable, dev);
if (ret)
return ret;
if (device_property_read_bool(dev, "wakeup-source")) {
ret = devm_device_init_wakeup(dev);
if (ret)
return dev_err_probe(dev, ret, "Failed to init wakeup\n");
}
return devm_iio_device_register(dev, indio_dev);
}
EXPORT_SYMBOL_NS_GPL(fxls8962af_core_probe, "IIO_FXLS8962AF");
static int fxls8962af_runtime_suspend(struct device *dev)
{
struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
int ret;
ret = fxls8962af_standby(data);
if (ret) {
dev_err(dev, "powering off device failed\n");
return ret;
}
return 0;
}
static int fxls8962af_runtime_resume(struct device *dev)
{
struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
return fxls8962af_active(data);
}
static int fxls8962af_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct fxls8962af_data *data = iio_priv(indio_dev);
if (device_may_wakeup(dev) && data->enable_event) {
enable_irq_wake(data->irq);
/*
* Disable buffer, as the buffer is so small the device will wake
* almost immediately.
*/
if (iio_buffer_enabled(indio_dev))
fxls8962af_buffer_predisable(indio_dev);
} else {
fxls8962af_runtime_suspend(dev);
}
return 0;
}
static int fxls8962af_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct fxls8962af_data *data = iio_priv(indio_dev);
if (device_may_wakeup(dev) && data->enable_event) {
disable_irq_wake(data->irq);
if (iio_buffer_enabled(indio_dev))
fxls8962af_buffer_postenable(indio_dev);
} else {
fxls8962af_runtime_resume(dev);
}
return 0;
}
EXPORT_NS_GPL_DEV_PM_OPS(fxls8962af_pm_ops, IIO_FXLS8962AF) = {
SYSTEM_SLEEP_PM_OPS(fxls8962af_suspend, fxls8962af_resume)
RUNTIME_PM_OPS(fxls8962af_runtime_suspend, fxls8962af_runtime_resume, NULL)
};
MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
MODULE_LICENSE("GPL v2");