Files
linux/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
Ajay Kumar baa6c3076a Documentation: drm: bridge: move to video/bridge
Move drm/bridge documentation to video/bridge.
Also, add proper documentation for gpios used by ptn3460.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-28 08:47:30 +01:00

40 lines
1.2 KiB
Plaintext

ptn3460 bridge bindings
Required properties:
- compatible: "nxp,ptn3460"
- reg: i2c address of the bridge
- powerdown-gpio: OF device-tree gpio specification for PD_N pin.
- reset-gpio: OF device-tree gpio specification for RST_N pin.
- edid-emulation: The EDID emulation entry to use
+-------+------------+------------------+
| Value | Resolution | Description |
| 0 | 1024x768 | NXP Generic |
| 1 | 1920x1080 | NXP Generic |
| 2 | 1920x1080 | NXP Generic |
| 3 | 1600x900 | Samsung LTM200KT |
| 4 | 1920x1080 | Samsung LTM230HT |
| 5 | 1366x768 | NXP Generic |
| 6 | 1600x900 | ChiMei M215HGE |
+-------+------------+------------------+
- video interfaces: Device node can contain video interface port
nodes for panel according to [1].
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
powerdown-gpio = <&gpy2 5 1 0 0>;
reset-gpio = <&gpx1 5 1 0 0>;
edid-emulation = <5>;
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};