mirror of
https://github.com/torvalds/linux.git
synced 2026-04-27 02:52:27 -04:00
Context information structure is going to be used in a000 devices for firmware self init. The self init includes firmware self loading from DRAM by ROM. This means the TFH relevant firmware loading can be cleaned up. The firmware loading includes the paging memory as well, so op mode can stop initializing the paging and sending the DRAM_BLOCK_CMD. Firmware is doing RFH, TFH and SCD configuration, while driver only fills the required configurations and addresses in the context information structure. The only remaining access to RFH is the write pointer, which is updated upon alive interrupt after FW configured the RFH. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
227 lines
7.1 KiB
C
227 lines
7.1 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2017 Intel Deutschland GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2017 Intel Deutschland GmbH
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************/
|
|
#include "iwl-trans.h"
|
|
#include "iwl-context-info.h"
|
|
#include "internal.h"
|
|
|
|
/*
|
|
* Start up NIC's basic functionality after it has been reset
|
|
* (e.g. after platform boot, or shutdown via iwl_pcie_apm_stop())
|
|
* NOTE: This does not load uCode nor start the embedded processor
|
|
*/
|
|
static int iwl_pcie_gen2_apm_init(struct iwl_trans *trans)
|
|
{
|
|
int ret = 0;
|
|
|
|
IWL_DEBUG_INFO(trans, "Init card's basic functions\n");
|
|
|
|
/*
|
|
* Use "set_bit" below rather than "write", to preserve any hardware
|
|
* bits already set by default after reset.
|
|
*/
|
|
|
|
/*
|
|
* Disable L0s without affecting L1;
|
|
* don't wait for ICH L0s (ICH bug W/A)
|
|
*/
|
|
iwl_set_bit(trans, CSR_GIO_CHICKEN_BITS,
|
|
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
|
|
|
|
/* Set FH wait threshold to maximum (HW error during stress W/A) */
|
|
iwl_set_bit(trans, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
|
|
|
|
/*
|
|
* Enable HAP INTA (interrupt from management bus) to
|
|
* wake device's PCI Express link L1a -> L0s
|
|
*/
|
|
iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
|
|
|
|
iwl_pcie_apm_config(trans);
|
|
|
|
/*
|
|
* Set "initialization complete" bit to move adapter from
|
|
* D0U* --> D0A* (powered-up active) state.
|
|
*/
|
|
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
|
|
|
|
/*
|
|
* Wait for clock stabilization; once stabilized, access to
|
|
* device-internal resources is supported, e.g. iwl_write_prph()
|
|
* and accesses to uCode SRAM.
|
|
*/
|
|
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
|
|
if (ret < 0) {
|
|
IWL_DEBUG_INFO(trans, "Failed to init the card\n");
|
|
return ret;
|
|
}
|
|
|
|
set_bit(STATUS_DEVICE_ENABLED, &trans->status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl_pcie_gen2_nic_init(struct iwl_trans *trans)
|
|
{
|
|
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
|
|
|
|
/* TODO: most of the logic can be removed in A0 - but not in Z0 */
|
|
spin_lock(&trans_pcie->irq_lock);
|
|
iwl_pcie_gen2_apm_init(trans);
|
|
spin_unlock(&trans_pcie->irq_lock);
|
|
|
|
iwl_op_mode_nic_config(trans->op_mode);
|
|
|
|
/* Allocate the RX queue, or reset if it is already allocated */
|
|
if (iwl_pcie_gen2_rx_init(trans))
|
|
return -ENOMEM;
|
|
|
|
/* Allocate or reset and init all Tx and Command queues */
|
|
if (iwl_pcie_gen2_tx_init(trans))
|
|
return -ENOMEM;
|
|
|
|
/* enable shadow regs in HW */
|
|
iwl_set_bit(trans, CSR_MAC_SHADOW_REG_CTRL, 0x800FFFFF);
|
|
IWL_DEBUG_INFO(trans, "Enabling shadow registers in device\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans, u32 scd_addr)
|
|
{
|
|
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
|
|
|
|
iwl_pcie_reset_ict(trans);
|
|
|
|
/* make sure all queue are not stopped/used */
|
|
memset(trans_pcie->queue_stopped, 0, sizeof(trans_pcie->queue_stopped));
|
|
memset(trans_pcie->queue_used, 0, sizeof(trans_pcie->queue_used));
|
|
|
|
/* now that we got alive we can free the fw image & the context info.
|
|
* paging memory cannot be freed included since FW will still use it
|
|
*/
|
|
iwl_pcie_ctxt_info_free(trans);
|
|
}
|
|
|
|
int iwl_trans_pcie_gen2_start_fw(struct iwl_trans *trans,
|
|
const struct fw_img *fw, bool run_in_rfkill)
|
|
{
|
|
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
|
|
bool hw_rfkill;
|
|
int ret;
|
|
|
|
/* This may fail if AMT took ownership of the device */
|
|
if (iwl_pcie_prepare_card_hw(trans)) {
|
|
IWL_WARN(trans, "Exit HW not ready\n");
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
iwl_enable_rfkill_int(trans);
|
|
|
|
iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
|
|
|
|
/*
|
|
* We enabled the RF-Kill interrupt and the handler may very
|
|
* well be running. Disable the interrupts to make sure no other
|
|
* interrupt can be fired.
|
|
*/
|
|
iwl_disable_interrupts(trans);
|
|
|
|
/* Make sure it finished running */
|
|
iwl_pcie_synchronize_irqs(trans);
|
|
|
|
mutex_lock(&trans_pcie->mutex);
|
|
|
|
/* If platform's RF_KILL switch is NOT set to KILL */
|
|
hw_rfkill = iwl_trans_check_hw_rf_kill(trans);
|
|
if (hw_rfkill && !run_in_rfkill) {
|
|
ret = -ERFKILL;
|
|
goto out;
|
|
}
|
|
|
|
/* Someone called stop_device, don't try to start_fw */
|
|
if (trans_pcie->is_down) {
|
|
IWL_WARN(trans,
|
|
"Can't start_fw since the HW hasn't been started\n");
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
/* make sure rfkill handshake bits are cleared */
|
|
iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
|
|
iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
|
|
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
|
|
|
|
/* clear (again), then enable host interrupts */
|
|
iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
|
|
|
|
ret = iwl_pcie_gen2_nic_init(trans);
|
|
if (ret) {
|
|
IWL_ERR(trans, "Unable to init nic\n");
|
|
goto out;
|
|
}
|
|
|
|
if (iwl_pcie_ctxt_info_init(trans, fw))
|
|
return -ENOMEM;
|
|
|
|
/* re-check RF-Kill state since we may have missed the interrupt */
|
|
hw_rfkill = iwl_trans_check_hw_rf_kill(trans);
|
|
if (hw_rfkill && !run_in_rfkill)
|
|
ret = -ERFKILL;
|
|
|
|
out:
|
|
mutex_unlock(&trans_pcie->mutex);
|
|
return ret;
|
|
}
|