Files
linux/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
Linus Torvalds cc0f7c3f97 Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
 "The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
  samsung, imx, zynq and amlogic platoforms are fairly small maintenance
  changes, either addressing minor mistakes or enabling additional
  hardware.

  The qualcomm platform changes add a number of features and are larger
  than the other ones combined, introducing the use of linux/cleanup.h
  across several drivers, adding support for Snapdragon X1E and other
  SoCs in platform drivers, a new "protection domain mapper" driver, and
  a "shared memory bridge" driver.

  The cznic "turris omnia" router based on Marvell Armada gets a
  platform driver that talks to the board specific microcontroller.

  The reset and cache subsystems get a few minor updates to SoC specific
  drivers, while the ff-a, scmi and optee firmware drivers get some code
  refactoring and new features"

* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
  firmware: turris-mox-rwtm: Initialize completion before mailbox
  firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
  firmware: turris-mox-rwtm: Do not complete if there are no waiters
  MAINTAINERS: drop riscv list from cache controllers
  platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
  bus: sunxi-rsb: Constify struct regmap_bus
  soc: sunxi: sram: Constify struct regmap_config
  platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
  platform: cznic: turris-omnia-mcu: Depend on OF
  soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
  arm64: stm32: enable scmi regulator for stm32
  firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
  soc: qcom: wcnss: simplify with cleanup.h
  soc: qcom: pdr: simplify with cleanup.h
  soc: qcom: ocmem: simplify with cleanup.h
  soc: qcom: mdt_loader: simplify with cleanup.h
  soc: qcom: llcc: simplify with cleanup.h
  firmware: qcom: tzmem: simplify returning pointer without cleanup
  soc: qcom: socinfo: Add PM6350 PMIC
  arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
  ...
2024-07-16 11:35:27 -07:00

236 lines
6.4 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/cache/qcom,llcc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Last Level Cache Controller
maintainers:
- Bjorn Andersson <andersson@kernel.org>
description: |
LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
that can be shared by multiple clients. Clients here are different cores in the
SoC, the idea is to minimize the local caches at the clients and migrate to
common pool of memory. Cache memory is divided into partitions called slices
which are assigned to clients. Clients can query the slice details, activate
and deactivate them.
properties:
compatible:
enum:
- qcom,qdu1000-llcc
- qcom,sa8775p-llcc
- qcom,sc7180-llcc
- qcom,sc7280-llcc
- qcom,sc8180x-llcc
- qcom,sc8280xp-llcc
- qcom,sdm845-llcc
- qcom,sm6350-llcc
- qcom,sm7150-llcc
- qcom,sm8150-llcc
- qcom,sm8250-llcc
- qcom,sm8350-llcc
- qcom,sm8450-llcc
- qcom,sm8550-llcc
- qcom,sm8650-llcc
- qcom,x1e80100-llcc
reg:
minItems: 2
maxItems: 9
reg-names:
minItems: 2
maxItems: 9
interrupts:
maxItems: 1
nvmem-cells:
items:
- description: Reference to an nvmem node for multi channel DDR
nvmem-cell-names:
items:
- const: multi-chan-ddr
required:
- compatible
- reg
- reg-names
allOf:
- if:
properties:
compatible:
contains:
enum:
- qcom,sc7180-llcc
- qcom,sm6350-llcc
then:
properties:
reg:
items:
- description: LLCC0 base register region
- description: LLCC broadcast base register region
reg-names:
items:
- const: llcc0_base
- const: llcc_broadcast_base
- if:
properties:
compatible:
contains:
enum:
- qcom,sa8775p-llcc
then:
properties:
reg:
items:
- description: LLCC0 base register region
- description: LLCC1 base register region
- description: LLCC2 base register region
- description: LLCC3 base register region
- description: LLCC4 base register region
- description: LLCC5 base register region
- description: LLCC broadcast base register region
reg-names:
items:
- const: llcc0_base
- const: llcc1_base
- const: llcc2_base
- const: llcc3_base
- const: llcc4_base
- const: llcc5_base
- const: llcc_broadcast_base
- if:
properties:
compatible:
contains:
enum:
- qcom,sc7280-llcc
then:
properties:
reg:
items:
- description: LLCC0 base register region
- description: LLCC1 base register region
- description: LLCC broadcast base register region
reg-names:
items:
- const: llcc0_base
- const: llcc1_base
- const: llcc_broadcast_base
- if:
properties:
compatible:
contains:
enum:
- qcom,qdu1000-llcc
- qcom,sc8180x-llcc
- qcom,sc8280xp-llcc
- qcom,x1e80100-llcc
then:
properties:
reg:
items:
- description: LLCC0 base register region
- description: LLCC1 base register region
- description: LLCC2 base register region
- description: LLCC3 base register region
- description: LLCC4 base register region
- description: LLCC5 base register region
- description: LLCC6 base register region
- description: LLCC7 base register region
- description: LLCC broadcast base register region
reg-names:
items:
- const: llcc0_base
- const: llcc1_base
- const: llcc2_base
- const: llcc3_base
- const: llcc4_base
- const: llcc5_base
- const: llcc6_base
- const: llcc7_base
- const: llcc_broadcast_base
- if:
properties:
compatible:
contains:
enum:
- qcom,sdm845-llcc
- qcom,sm8150-llcc
- qcom,sm8250-llcc
- qcom,sm8350-llcc
then:
properties:
reg:
items:
- description: LLCC0 base register region
- description: LLCC1 base register region
- description: LLCC2 base register region
- description: LLCC3 base register region
- description: LLCC broadcast base register region
reg-names:
items:
- const: llcc0_base
- const: llcc1_base
- const: llcc2_base
- const: llcc3_base
- const: llcc_broadcast_base
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8450-llcc
- qcom,sm8550-llcc
- qcom,sm8650-llcc
then:
properties:
reg:
items:
- description: LLCC0 base register region
- description: LLCC1 base register region
- description: LLCC2 base register region
- description: LLCC3 base register region
- description: LLCC broadcast OR register region
- description: LLCC broadcast AND register region
reg-names:
items:
- const: llcc0_base
- const: llcc1_base
- const: llcc2_base
- const: llcc3_base
- const: llcc_broadcast_base
- const: llcc_broadcast_and_base
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
system-cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>,
<0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
<0 0x01300000 0 0x50000>;
reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
"llcc3_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
};