mirror of
https://github.com/torvalds/linux.git
synced 2026-04-28 11:32:28 -04:00
e90937e756
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
105 lines
3.3 KiB
Plaintext
105 lines
3.3 KiB
Plaintext
Amlogic MesonX device tree bindings
|
|
-------------------------------------------
|
|
|
|
Work in progress statement:
|
|
|
|
Device tree files and bindings applying to Amlogic SoCs and boards are
|
|
considered "unstable". Any Amlogic device tree binding may change at
|
|
any time. Be sure to use a device tree binary and a kernel image
|
|
generated from the same source tree.
|
|
|
|
Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
|
|
stable binding/ABI.
|
|
|
|
---------------------------------------------------------------
|
|
|
|
Boards with the Amlogic Meson6 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson6"
|
|
|
|
Boards with the Amlogic Meson8 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson8";
|
|
|
|
Boards with the Amlogic Meson8b SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson8b";
|
|
|
|
Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson-gxbb";
|
|
|
|
Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s905x", "amlogic,meson-gxl";
|
|
|
|
Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s905d", "amlogic,meson-gxl";
|
|
|
|
Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s912", "amlogic,meson-gxm";
|
|
|
|
Board compatible values (alphabetically, grouped by SoC):
|
|
|
|
- "geniatech,atv1200" (Meson6)
|
|
|
|
- "minix,neo-x8" (Meson8)
|
|
|
|
- "hardkernel,odroid-c1" (Meson8b)
|
|
- "tronfy,mxq" (Meson8b)
|
|
|
|
- "amlogic,p200" (Meson gxbb)
|
|
- "amlogic,p201" (Meson gxbb)
|
|
- "friendlyarm,nanopi-k2" (Meson gxbb)
|
|
- "hardkernel,odroid-c2" (Meson gxbb)
|
|
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
|
|
- "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
|
|
- "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
|
|
- "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
|
|
- "wetek,hub" (Meson gxbb)
|
|
- "wetek,play2" (Meson gxbb)
|
|
|
|
- "amlogic,p212" (Meson gxl s905x)
|
|
- "hwacom,amazetv" (Meson gxl s905x)
|
|
- "khadas,vim" (Meson gxl s905x)
|
|
- "libretech,cc" (Meson gxl s905x)
|
|
|
|
- "amlogic,p230" (Meson gxl s905d)
|
|
- "amlogic,p231" (Meson gxl s905d)
|
|
|
|
- "amlogic,q200" (Meson gxm s912)
|
|
- "amlogic,q201" (Meson gxm s912)
|
|
- "kingnovel,r-box-pro" (Meson gxm S912)
|
|
- "nexbox,a1" (Meson gxm s912)
|
|
|
|
Amlogic Meson Firmware registers Interface
|
|
------------------------------------------
|
|
|
|
The Meson SoCs have a register bank with status and data shared with the
|
|
secure firmware.
|
|
|
|
Required properties:
|
|
- compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
|
|
|
|
Properties should indentify components of this register interface :
|
|
|
|
Meson GX SoC Information
|
|
------------------------
|
|
A firmware register encodes the SoC type, package and revision information on
|
|
the Meson GX SoCs.
|
|
If present, the following property should be added :
|
|
|
|
Optional properties:
|
|
- amlogic,has-chip-id: If present, the interface gives the current SoC version.
|
|
|
|
Example
|
|
-------
|
|
|
|
ao-secure@140 {
|
|
compatible = "amlogic,meson-gx-ao-secure", "syscon";
|
|
reg = <0x0 0x140 0x0 0x140>;
|
|
amlogic,has-chip-id;
|
|
};
|