bybrooklyn/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-04-25 10:02:31 -04:00
Code Issues Packages Projects Releases Wiki Activity
Files
e623b4ebee9d3a4b1e408b2c3e60cfc99b4e61ea
linux/drivers/net/usb/sr9700.c
Ethan Nelson-Moore 9a9424c756 net: usb: sr9700: remove code to drive nonexistent multicast filter 
Several registers referenced in this driver's source code do not
actually exist (they are not writable and read as zero in my testing).
They exist in this driver because it originated as a copy of the dm9601
driver. Notably, these include the multicast filter registers - this
causes the driver to not support multicast packets correctly. Remove
the multicast filter code and register definitions. Instead, set the
chip to receive all multicast filter packets when any multicast
addresses are in the list.

Reviewed-by: Simon Horman <horms@kernel.org> (from v1)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260203013924.28582-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03 19:42:15 -08:00

484 lines
11 KiB
C
Raw Blame History

/*
* CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
*
* Author : Liu Junliang <liujunliang_ljl@163.com>
*
* Based on dm9601.c
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/stddef.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
#include "sr9700.h"
static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
{
int err;
err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
length);
if ((err != length) && (err >= 0))
err = -EINVAL;
return err;
}
static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
{
int err;
err = usbnet_write_cmd(dev, SR_WR_MULTIPLE_REGS, SR_REQ_WR_REG, 0, reg, data,
length);
if ((err >= 0) && (err < length))
err = -EINVAL;
return err;
}
static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
{
return sr_read(dev, reg, 1, value);
}
static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
{
return usbnet_write_cmd(dev, SR_WR_SINGLE_REG, SR_REQ_WR_REG,
value, reg, NULL, 0);
}
static void sr_write_async(struct usbnet *dev, u8 reg, u16 length,
const void *data)
{
usbnet_write_cmd_async(dev, SR_WR_MULTIPLE_REGS, SR_REQ_WR_REG,
0, reg, data, length);
}
static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
{
usbnet_write_cmd_async(dev, SR_WR_SINGLE_REG, SR_REQ_WR_REG,
value, reg, NULL, 0);
}
static int wait_eeprom_ready(struct usbnet *dev)
{
int i;
for (i = 0; i < SR_EEPROM_TIMEOUT; i++) {
u8 tmp = 0;
int ret;
udelay(1);
ret = sr_read_reg(dev, SR_EPCR, &tmp);
if (ret < 0)
return ret;
/* ready */
if (!(tmp & EPCR_ERRE))
return 0;
}
netdev_err(dev->net, "eeprom write timed out!\n");
return -EIO;
}
static int sr_read_eeprom_word(struct usbnet *dev, u8 reg, __le16 *value)
{
int ret;
mutex_lock(&dev->phy_mutex);
sr_write_reg(dev, SR_EPAR, reg);
sr_write_reg(dev, SR_EPCR, EPCR_ERPRR);
ret = wait_eeprom_ready(dev);
if (ret < 0)
goto out_unlock;
sr_write_reg(dev, SR_EPCR, 0x0);
ret = sr_read(dev, SR_EPDR, 2, value);
netdev_dbg(dev->net, "read eeprom 0x%02x returned 0x%04x, %d\n",
reg, *value, ret);
out_unlock:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static int __maybe_unused sr_write_eeprom_word(struct usbnet *dev, u8 reg,
__le16 value)
{
int ret;
mutex_lock(&dev->phy_mutex);
ret = sr_write(dev, SR_EPDR, 2, &value);
if (ret < 0)
goto out_unlock;
sr_write_reg(dev, SR_EPAR, reg);
sr_write_reg(dev, SR_EPCR, EPCR_WEP | EPCR_ERPRW);
ret = wait_eeprom_ready(dev);
if (ret < 0)
goto out_unlock;
sr_write_reg(dev, SR_EPCR, 0x0);
out_unlock:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static int sr9700_get_eeprom_len(struct net_device *netdev)
{
return SR_EEPROM_LEN;
}
static int sr9700_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, u8 *data)
{
struct usbnet *dev = netdev_priv(netdev);
__le16 *buf = (__le16 *)data;
int ret = 0;
int i;
/* access is 16bit */
if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
return -EINVAL;
for (i = 0; i < eeprom->len / 2; i++) {
ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
if (ret < 0)
break;
}
return ret;
}
static void sr9700_handle_link_change(struct net_device *netdev, bool link)
{
if (netif_carrier_ok(netdev) != link) {
if (link) {
netif_carrier_on(netdev);
netdev_info(netdev, "link up, 10Mbps, half-duplex\n");
} else {
netif_carrier_off(netdev);
netdev_info(netdev, "link down\n");
}
}
}
static u32 sr9700_get_link(struct net_device *netdev)
{
struct usbnet *dev = netdev_priv(netdev);
u8 value = 0;
u32 link = 0;
sr_read_reg(dev, SR_NSR, &value);
link = !!(value & NSR_LINKST);
sr9700_handle_link_change(netdev, link);
return link;
}
/*
* The device supports only 10Mbps half-duplex operation. It implements the
* DM9601 speed/duplex status registers, but as the values are always the same,
* using them would add unnecessary complexity.
*/
static int sr9700_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
ethtool_link_ksettings_zero_link_mode(cmd, supported);
ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
ethtool_link_ksettings_zero_link_mode(cmd, advertising);
ethtool_link_ksettings_add_link_mode(cmd, advertising, 10baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
cmd->base.speed = SPEED_10;
cmd->base.duplex = DUPLEX_HALF;
cmd->base.port = PORT_TP;
cmd->base.phy_address = 0;
cmd->base.autoneg = AUTONEG_DISABLE;
return 0;
}
static const struct ethtool_ops sr9700_ethtool_ops = {
.get_drvinfo = usbnet_get_drvinfo,
.get_link = sr9700_get_link,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_eeprom_len = sr9700_get_eeprom_len,
.get_eeprom = sr9700_get_eeprom,
.get_link_ksettings = sr9700_get_link_ksettings,
};
static void sr9700_set_multicast(struct net_device *netdev)
{
struct usbnet *dev = netdev_priv(netdev);
/* rx_ctl setting : enable, disable_long, disable_crc */
u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
if (netdev->flags & IFF_PROMISC)
rx_ctl |= RCR_PRMSC;
else if (netdev->flags & IFF_ALLMULTI || !netdev_mc_empty(netdev))
/* The chip has no multicast filter */
rx_ctl |= RCR_ALL;
sr_write_reg_async(dev, SR_RCR, rx_ctl);
}
static int sr9700_set_mac_address(struct net_device *netdev, void *p)
{
struct usbnet *dev = netdev_priv(netdev);
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data)) {
netdev_err(netdev, "not setting invalid mac address %pM\n",
addr->sa_data);
return -EINVAL;
}
eth_hw_addr_set(netdev, addr->sa_data);
sr_write_async(dev, SR_PAR, ETH_ALEN, netdev->dev_addr);
return 0;
}
static const struct net_device_ops sr9700_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_get_stats64 = dev_get_tstats64,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_rx_mode = sr9700_set_multicast,
.ndo_set_mac_address = sr9700_set_mac_address,
};
static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct net_device *netdev;
u8 addr[ETH_ALEN];
int ret;
ret = usbnet_get_endpoints(dev, intf);
if (ret)
goto out;
netdev = dev->net;
netdev->netdev_ops = &sr9700_netdev_ops;
netdev->ethtool_ops = &sr9700_ethtool_ops;
netdev->hard_header_len += SR_TX_OVERHEAD;
dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
/* bulkin buffer is preferably not less than 3K */
dev->rx_urb_size = 3072;
sr_write_reg(dev, SR_NCR, NCR_RST);
udelay(20);
/* read MAC
* After Chip Power on, the Chip will reload the MAC from
* EEPROM automatically to PAR. In case there is no EEPROM externally,
* a default MAC address is stored in PAR for making chip work properly.
*/
if (sr_read(dev, SR_PAR, ETH_ALEN, addr) < 0) {
netdev_err(netdev, "Error reading MAC address\n");
ret = -ENODEV;
goto out;
}
eth_hw_addr_set(netdev, addr);
/* power up and reset phy */
sr_write_reg(dev, SR_PRR, PRR_PHY_RST);
/* at least 10ms, here 20ms for safe */
msleep(20);
sr_write_reg(dev, SR_PRR, 0);
/* at least 1ms, here 2ms for reading right register */
udelay(2 * 1000);
/* receive broadcast packets */
sr9700_set_multicast(netdev);
out:
return ret;
}
static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
struct sk_buff *sr_skb;
int len;
/* skb content (packets) format :
* p1 p2 p3 ...... pn
* / \
* / \
* / \
* / \
* p1b1 p1b2 p1b3 p1b4 ...... p1b(n-4) p1b(n-3)...p1bn
*
* p1 : packet 1
* p1b1 : packet 1 byte 1
*
* b1: rx status
* b2: packet length (incl crc) low
* b3: packet length (incl crc) high
* b4..n-4: packet data
* bn-3..bn: ethernet packet crc
*/
if (unlikely(skb->len < SR_RX_OVERHEAD)) {
netdev_err(dev->net, "unexpected tiny rx frame\n");
return 0;
}
/* one skb may contains multiple packets */
while (skb->len > SR_RX_OVERHEAD) {
if (skb->data[0] != RSR_MF)
return 0;
/* ignore the CRC length */
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
if (len > ETH_FRAME_LEN || len > skb->len || len < 0)
return 0;
/* the last packet of current skb */
if (skb->len == (len + SR_RX_OVERHEAD)) {
skb_pull(skb, 3);
skb->len = len;
skb_set_tail_pointer(skb, len);
return 2;
}
sr_skb = netdev_alloc_skb_ip_align(dev->net, len);
if (!sr_skb)
return 0;
skb_put(sr_skb, len);
memcpy(sr_skb->data, skb->data + 3, len);
usbnet_skb_return(dev, sr_skb);
skb_pull(skb, len + SR_RX_OVERHEAD);
}
return 0;
}
static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
gfp_t flags)
{
int len;
/* SR9700 can only send out one ethernet packet at once.
*
* b1 b2 b3 b4 ...... b(n-4) b(n-3)...bn
*
* b1: rx status
* b2: packet length (incl crc) low
* b3: packet length (incl crc) high
* b4..n-4: packet data
* bn-3..bn: ethernet packet crc
*/
len = skb->len;
if (skb_cow_head(skb, SR_TX_OVERHEAD)) {
dev_kfree_skb_any(skb);
return NULL;
}
__skb_push(skb, SR_TX_OVERHEAD);
/* usbnet adds padding if length is a multiple of packet size
* if so, adjust length value in header
*/
if ((skb->len % dev->maxpacket) == 0)
len++;
skb->data[0] = len;
skb->data[1] = len >> 8;
return skb;
}
static void sr9700_status(struct usbnet *dev, struct urb *urb)
{
bool link;
u8 *buf;
/* format:
b1: net status
b2: tx status 1
b3: tx status 2
b4: rx status
b5: rx overflow
b6: rx count
b7: tx count
b8: gpr
*/
if (urb->actual_length < 8)
return;
buf = urb->transfer_buffer;
link = !!(buf[0] & NSR_LINKST);
sr9700_handle_link_change(dev->net, link);
}
static const struct driver_info sr9700_driver_info = {
.description = "CoreChip SR9700 USB Ethernet",
.flags = FLAG_ETHER,
.bind = sr9700_bind,
.rx_fixup = sr9700_rx_fixup,
.tx_fixup = sr9700_tx_fixup,
.status = sr9700_status,
};
static const struct usb_device_id products[] = {
{
USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */
.driver_info = (unsigned long)&sr9700_driver_info,
},
{
/* SR9700 with virtual driver CD-ROM - interface 0 is the CD-ROM device */
USB_DEVICE_INTERFACE_NUMBER(0x0fe6, 0x9702, 1),
.driver_info = (unsigned long)&sr9700_driver_info,
},
{}, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver sr9700_usb_driver = {
.name = "sr9700",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(sr9700_usb_driver);
MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink