mirror of
https://github.com/torvalds/linux.git
synced 2026-04-19 15:24:02 -04:00
fae50924f9
The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected using MIPI-DSI interfaces. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
29 lines
769 B
Plaintext
29 lines
769 B
Plaintext
Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
|
|
|
|
Required properties:
|
|
- compatible: "samsung,s6e3ha2"
|
|
- reg: the virtual channel number of a DSI peripheral
|
|
- vdd3-supply: I/O voltage supply
|
|
- vci-supply: voltage supply for analog circuits
|
|
- reset-gpios: a GPIO spec for the reset pin (active low)
|
|
- enable-gpios: a GPIO spec for the panel enable pin (active high)
|
|
|
|
Optional properties:
|
|
- te-gpios: a GPIO spec for the tearing effect synchronization signal
|
|
gpio pin (active high)
|
|
|
|
Example:
|
|
&dsi {
|
|
...
|
|
|
|
panel@0 {
|
|
compatible = "samsung,s6e3ha2";
|
|
reg = <0>;
|
|
vdd3-supply = <&ldo27_reg>;
|
|
vci-supply = <&ldo28_reg>;
|
|
reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
|
|
enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
|
|
te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|