Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
Pull nolibc updates from Thomas Weißschuh:
- Many new features and optimizations to printf()
- Rename non-standard symbols to avoid collisions with application code
- Support for byteswap.h, endian.h, err.h and asprintf()
- 64-bit dev_t
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (61 commits)
selftests/nolibc: use gcc 15
tools/nolibc: support UBSAN on gcc
tools/nolibc: create __nolibc_no_sanitize_ubsan
selftests/nolibc: don't skip tests for unimplemented syscalls anymore
selftests/nolibc: explicitly handle ENOSYS from ptrace()
tools/nolibc: add byteorder conversions
tools/nolibc: add the _syscall() macro
tools/nolibc: move the call to __sysret() into syscall()
tools/nolibc: rename the internal macros used in syscall()
selftests/nolibc: only use libgcc when really necessary
selftests/nolibc: test the memory allocator
tools/nolibc: check for overflow in calloc() without divisions
tools/nolibc: add support for asprintf()
tools/nolibc: use __builtin_offsetof()
tools/nolibc: use makedev() in fstatat()
tools/nolibc: handle all major and minor numbers in makedev() and friends
tools/nolibc: make dev_t 64 bits wide
tools/nolibc: move the logic of makedev() and friends into functions
selftests/nolibc: add a test for stat().st_rdev
selftests/nolibc: add some tests for makedev() and friends
...
KVM/arm64 updates for 7.1
* New features:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis.
This comes with a full infrastructure for 'remote' trace buffers
that can be exposed by non-kernel entities such as firmware.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, with anonymous
memory being used as a backing store. About time!
* Improvements and bug fixes:
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to
the various helpers and rendering a substantial amount of
state immutable.
- Expand the Stage-2 page table dumper to support NV shadow
page tables on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard
to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they
do not generate spurious, out of context table walks that
ultimately lead to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error
cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The standard syscall() function or macro uses the libc return value
convention. Errors returned from the kernel as negative values are
stored in errno and -1 is returned. Users who want to avoid using
errno don't have a way to call raw syscalls and check the returned
error.
Add a new macro _syscall() which works like the standard syscall()
but passes through the return value from the kernel unchanged.
The naming scheme and return values match the named _sys_foo()
system call wrappers already part of nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260405-nolibc-syscall-v1-3-e5b12bc63211@weissschuh.net
__sysret() transforms the return value from the kernel into the libc
return value convention. There is no reason for it to be called in the
middle of the internals of the syscall() implementation macros.
Move the call up, directly into syscall(), to make the code simpler.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260405-nolibc-syscall-v1-2-e5b12bc63211@weissschuh.net
On some architectures without native division instructions
the division can generate calls into libgcc/compiler-rt.
This library might not be available, so its use should be avoided.
Use the compiler builtin to check for overflows without needing a
division. The builtin has been available since GCC 3 and clang 3.8.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-asprintf-v2-1-17d2d0df9763@weissschuh.net
Patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma code", v4.
This series converts a lot of the existing use of the legacy vm_flags_t
data type to the new vma_flags_t type which replaces it.
In order to do so it adds a number of additional helpers:
* vma_flags_empty() - Determines whether a vma_flags_t value has no bits
set.
* vma_flags_and() - Performs a bitwise AND between two vma_flags_t values.
* vma_flags_diff_pair() - Determines which flags are not shared between a
pair of VMA flags (typically non-constant values)
* append_vma_flags() - Similar to mk_vma_flags(), but allows a vma_flags_t
value to be specified (typically a constant value) which will be copied
and appended to to create a new vma_flags_t value, with additional flags
specified to append to it.
* vma_flags_same() - Determines if a vma_flags_t value is exactly equal to
a set of VMA flags.
* vma_flags_same_mask() - Determines if a vma_flags_t value is eactly equal
to another vma_flags_t value (typically constant).
* vma_flags_same_pair() - Determines if a pair of vma_flags_t values are
exactly equal to one another (typically both non-constant).
* vma_flags_to_legacy() - Converts a vma_flags_t value to a vm_flags_t
value, used to enable more iterative introduction of the use of
vma_flags_t.
* legacy_to_vma_flags() - Converts a vm_flags_t value to a vma_flags-t
value, for the same purpose.
* vma_flags_test_single_mask() - Tests whether a vma_flags_t value contain
the single flag specified in an input vma_flags_t flag mask, or if that
flag mask is empty, is defined to return false. Useful for
config-predicated VMA flag mask defines.
* vma_test() - Tests whether a VMA's flags contain a specific singular VMA
flag.
* vma_test_any() - Tests whether a VMA's flags contain any of a set of VMA
flags.
* vma_test_any_mask() - Tests whether a VMA's flags contain any of the
flags specified in another, typically constant, vma_flags_t value.
* vma_test_single_mask() - Tests whether a VMA's flags contain the single
flag specified in an input vma_flags_t flag mask, or if that flag mask is
empty, is defined to return false. Useful for config-predicated VMA flag
mask defines.
* vma_clear_flags() - Clears a specific set of VMA flags from a vma_flags_t
value.
* vma_clear_flags_mask() - Clears those flag set in a vma_flags_t value
(typically constant) from a (typically not constant) vma_flags_t value.
The series mostly focuses on the the VMA specific code, especially that
contained in mm/vma.c and mm/vma.h.
It updates both brk() and mmap() logic to utils vma_flags_t values as much
as is practiaclly possible at this point, changing surrounding logic to be
able to do so.
It also updates the vma_modify_xxx() functions where they interact with VMA
flags directly to use vm_flags_t values where possible.
There is extensive testing added in the VMA userland tests to assert that
all of these new VMA flag functions work correctly.
This patch (of 25):
Firstly, add the ability to determine if VMA flags are empty, that is no
flags are set in a vma_flags_t value.
Next, add the ability to obtain the equivalent of the bitwise and of two
vma_flags_t values, via vma_flags_and_mask().
Next, add the ability to obtain the difference between two sets of VMA
flags, that is the equivalent to the exclusive bitwise OR of the two sets
of flags, via vma_flags_diff_pair().
vma_flags_xxx_mask() typically operates on a pointer to a vma_flags_t
value, which is assumed to be an lvalue of some kind (such as a field in a
struct or a stack variable) and an rvalue of some kind (typically a
constant set of VMA flags obtained e.g. via mk_vma_flags() or
equivalent).
However vma_flags_diff_pair() is intended to operate on two lvalues, so
use the _pair() suffix to make this clear.
Finally, update VMA userland tests to add these helpers.
We also port bitmap_xor() and __bitmap_xor() to the tools/ headers and
source to allow the tests to work with vma_flags_diff_pair().
Link: https://lkml.kernel.org/r/cover.1774034900.git.ljs@kernel.org
Link: https://lkml.kernel.org/r/53ab55b7da91425775e42c03177498ad6de88ef4.1774034900.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current custom implementation of offsetof() fails UBSAN:
runtime error: member access within null pointer of type 'struct ...'
This means that all its users, including container_of(), free() and
realloc(), fail.
Use __builtin_offsetof() instead which does not have this issue and
has been available since GCC 4 and clang 3.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260401-nolibc-asprintf-v1-1-46292313439f@weissschuh.net
statx() returns both 32-bit minor and major numbers. For both of them to
fit into the 'dev_t' in 'struct stat', that needs to be 64 bits wide.
The other uses of 'dev_t' in nolibc are makedev() and friends and
mknod(). makedev() and friends are going to be adapted in an upcoming
commit and mknod() will silently truncate 'dev_t' to 'unsigned int' in
the kernel, similar to other libcs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-4-456a429bf60c@weissschuh.net
Functions make it easier to keep the input and output types straight and
avoid duplicate evaluations of their arguments.
Also these functions will become a bit more complex to handle full
64-bit 'dev_t' which is easier to read in a function.
Still stay compatible with code which expects these to be macros.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-3-456a429bf60c@weissschuh.net
For (eg) "%*.*s" treat a negative field width as a request to left align
the output (the same as the '-' flag), and a negative precision to
request the default precision.
Set the default precision to -1 (not INT_MAX) and add explicit checks
to the string handling for negative values (makes the tet unsigned).
For numeric output check for 'precision >= 0' instead of testing
_NOLIBC_PF_FLAGS_CONTAIN(flags, '.').
This needs an inverted test, some extra goto and removes an indentation.
The changed conditionals fix printf("%0-#o", 0) - but '0' and '-' shouldn't
both be specified.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260323112247.3196-1-david.laight.linux@gmail.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Clarify bpf_ringbuf_discard() documentation for BPF_RB_NO_WAKEUP.
Discarded ring buffer records are still left in the ring buffer and are
only skipped when user space consumes them. This can matter when
BPF_RB_NO_WAKEUP is used: a later submit relying on adaptive wakeup
might not wake the consumer, because the discarded record still needs to
be consumed first.
Scenario:
epoll_wait(rb_fd); // blocks
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_discard(rec, BPF_RB_NO_WAKEUP);
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_submit(rec, 0); // valid record, but no wakeup
Document this in bpf_ringbuf_discard() to make the interaction between
discarded records, user-space consumption, and adaptive wakeups explicit.
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260331130612.3762433-1-eyal.birger@gmail.com
----
v2: adapt wording per feedback from Andrii.
To pick up the changes in:
6ffd853b0b ("build_bug.h: correct function parameters names in kernel-doc")
That just add some comments, addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Please take a look at tools/include/uapi/README for further info on this
synchronization process.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
da142f3d37 ("KVM: Remove subtle "struct kvm_stats_desc" pseudo-overlay")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the 'perf trace' ioctl syscall argument beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sys_foo() naming scheme used by the syscall wrappers may collide
with application symbols. Especially as 'sys_' is an obvious naming
scheme an application may choose for its own custom systemcall wrappers.
Avoid these conflicts by using an leading underscore which moves the
names into the implementation's namespace. This naming scheme was chosen
over a '__nolibc_' prefix, as these functions are not an implementation
detail but a documented interface meant to be used by applications.
While this may break some existing users, adapting them should be
straightforward. Given that nolibc is most-likely vendored, no
unexpected breakage should happen. No in-tree users are affected.
These conflicts happen when compiling some of the kernel selftests
with nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260319-nolibc-namespacing-v1-1-33c22eaddb5e@weissschuh.net
With -std=c89 the macro __STDC_VERSION__ is not defined.
While undefined identifiers in '#if' directives are assumed to be '0',
with -Wundef a warning is emitted.
Avoid the warning by explicitly falling back to '0' if __STDC_VERSION__
is not provided by the preprocessor.
Fixes: 37219aa5b1 ("tools/nolibc: add __nolibc_static_assert()")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260318-nolibc-wundef-v1-1-fcb7f9ac7298@weissschuh.net
Add support for the GNU extensions 'program_invocation_name' and
'program_invocation_short_name'. These are useful to print error
messages, which by convention include the program name.
As these are global variables which take up memory even if not used,
similar to 'errno', gate them behind NOLIBC_IGNORE_ERRNO.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260318-nolibc-err-h-v4-1-08247a694bd9@weissschuh.net
Octal output isn't often used, but adding it costs very little.
Supporting "%#o" is mildly annoying, it has to add a leading '0' if
there isn't one present. In simple cases this is the same as adding a sign
of '0' - but that adds an extra '0' in a few places.
So you need 3 tests, %o, # and no leading '0' (which can only be checked
after the zero pad for precision).
If all the test are deferred until after zero padding then too many values
are 'live' across the call to _nolibc_u64toa_base() and get spilled to stack.
Hence the check that ignores the 'sign' if it is the same as the first
character of the output string.
Add tests for octal output.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260308113742.12649-17-david.laight.linux@gmail.com
[Thomas: avoid a -Wsign-compare]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Includes support for variable field widths (eg "%*.*d").
Zero padding is limited to 31 zero characters.
This is wider than the largest numeric field so shouldn't be a problem.
All the standard printf formats are now supported except octal
and floating point.
Add tests for new features
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260308113742.12649-16-david.laight.linux@gmail.com
[Thomas: fixup testcases for musl libc]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The output for %#x is almost the same as that for %p, both output in
hexadecimal with a leading "0x".
However for zero %#x should just output "0" (the same as decimal and ocal).
For %p match glibc and output "(nil)" rather than "0x0" or "0".
Add tests for "%#x", "% d", "%+d" and passing NULL to "%p".
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260308113742.12649-14-david.laight.linux@gmail.com
[Thomas: fix up testcases for musl libc]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Length modifiers t (ptrdiff_t) and z (size_t) are aliases for l (long),
q and L are 64bit the same as j (intmax).
Format i is an alias for d and X similar to x but upper case.
Supporting them is mostly just adding the relevant bit to the bit
pattern used for matching characters.
Although %X is detected the output will be lower case.
Change/add tests to use conversions i and X, and length modifiers L and ll.
Use the correct minimum value for "%Li".
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260308113742.12649-10-david.laight.linux@gmail.com
[Thomas: Fix up testcases for musl libc]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
