mirror of
https://github.com/torvalds/linux.git
synced 2026-04-18 14:53:58 -04:00
3ac4e6b92fc200e047d13aae06224b2a72539b9e
653 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
505d195b0f |
Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ... |
||
|
Linus Torvalds
|
939faf71cf |
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
||
|
Linus Torvalds
|
532355a756 |
Merge tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
|
||
|
Vasileios Amoiridis
|
438921da7b |
dt-bindings: trivial-devices: Add hitron,hac300s
Add HiTRON HAC300S PSU to trivial devices since it is simple PMBUS capable device. Since this is the first supported device from this vendor, document its name to the vendor-prefixes.yaml file as well. Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260119190806.35276-2-vassilisamir@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
||
|
Arnd Bergmann
|
17102e756d |
Merge tag 'mtk-dts64-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates This adds support for new boards and variants based on different already supported MediaTek SoCs, and improves support for current boards. In particular: - New machines: - Ezurio Tungsten 510 (MediaTek Genio 510 SoC) - Ezurio Tungsten 700 (MediaTek Genio 700 SoC) ...improvements for already supported SoCs and machines: - MT7981b gains support for PCI-Express, USB, Ethernet and for the "GED" WiFi HW offload - OpenWRT One board gains support for the same - MT8188/8195/8390/8395 gains support for the DPI1 interface and HDMI output from the SoC's HDMI Tx controller along with its HDMI PHY and DDC IPs, usable on a selection of boards that expose a HDMI connector, namely: - All MT8390 Genio EVK based boards - All MT8395 Genio EVK based boards - Radxa NIO-12L (MT8395) ...and dtbs_check warning fixes for many of the MTK devicetrees, including MT6795, MT7981, MT7986, MT7988, MT8173, MT8183, MT8186, MT8188, MT8192, and a dts coding style fix for Airoha EN7581-EVB. This also includes a fix for the new devicetree overlay warnings, adding dtbs with applied overlays for all of the devices having at least one overlay. * tag 'mtk-dts64-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (47 commits) arm64: dts: mediatek: mt8192: Rename mt8192-afe-pcm to audio-controller dt-bindings: arm: mediatek: audsys: Support mt8192-audsys variant arm64: dts: mediatek: mt7988a: Fix PCI-Express T-PHY node address arm64: dts: mediatek: mt8186-evb: Add vproc fixed regulator arm64: dts: mediatek: mt7981b-openwrt-one: Add address/size cells to eth arm64: dts: mediatek: mt8183-kukui: Clean up IT6505 regulator supply arm64: dts: mediatek: mt7986a: Change compatible for SafeXcel crypto arm64: dts: mediatek: mt8173-evb: Add interrupts to DA9211 regulator arm64: dts: mediatek: mt6795-xperia-m5: Rename PMIC leds node arm64: dts: mediatek: mt6795: Fix issues in SCPSYS node arm64: dts: mediatek: mt6331: Fix VCAM IO regulator name arm64: dts: mediatek: mt6795-xperia-m5: Add UHS pins for MMC1 and 2 arm64: dts: mediatek: mt8192-asurada: Remove unused clock-stretch-ns arm64: dts: mediatek: mt8173-elm: Remove regulators from thermal node arm64: dts: mediatek: mt8173-elm: Fix dsi0 ports warning arm64: dts: mediatek: mt8173-elm: Fix bluetooth node name and reorder arm64: dts: mediatek: mt8183-pumpkin: Fix pinmux node names arm64: dts: mediatek: mt8183-jacuzzi-pico6: Fix typo in pinmux node arm64: dts: mediatek: mt7981b-openwrt-one: Remove useless cells from flash@0 arm64: dts: mediatek: mt8183-evb: Fix dtbs_check warnings ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
33dc81740d |
Merge tag 'imx-bindings-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindgings changes for 6.20: - New board compatibles for i.MX93 11x11 FRDM, Apalis iMX8QP, i.MX91 FRDM, ifm VHIP4 EvalBoard v1 and v2, TQ-Systems MBLS1028A/MBLS1028A-IND, i.MX952 EVK, i.MX8MP FRDM - Add vendor prefix for ifm electronic gmbh - A couple of small changes for fsl,imx-gpc.yaml and tcg,tpm-tis-i2c.yaml * tag 'imx-bindings-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board dt-bindings: arm: fsl: Document ifm VHIP4 EvalBoard v1 and v2 dt-bindings: vendor-prefixes: Document ifm electronic gmbh dt-bindings: arm: fsl: Add FRDM-IMX91 board dt-bindings: tpm: Add st,st33tphf2ei2c dt-bindings: arm: fsl: Add Apalis iMX8QP dt-bindings: arm: fsl: add i.MX952 EVK board dt-bindings: arm: fsl: add i.MX93 11x11 FRDM board dt-bindings: power: fsl,imx-gpc: Document address-cells dt-bindings: arm: fsl: Add i.MX8MP FRDM board dt-bindings: arm: fsl: add TQ-Systems boards MBLS1028A and MBLS1028A-IND Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Val Packett
|
00e6f8f606 |
dt-bindings: vendor-prefixes: Add AlgolTek
AlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion. Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260120234029.419825-4-val@packett.cool Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> |
||
|
Marek Vasut
|
6f55fc60dc |
dt-bindings: vendor-prefixes: Document ifm electronic gmbh
ifm is a manufacturer of industrial sensors, control technology and automation solutions. Document their vendor prefix, which is already used for ifm,ac14xx and other powerpc devices. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Marek Vasut <marex@nabladev.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Shrikant Raskar
|
e4d0e63e24 |
dt-bindings: iio: proximity: Add RF Digital RFD77402 ToF sensor
The RF Digital RFD77402 is a Time-of-Flight (ToF) proximity and distance sensor that provides absolute and highly accurate distance measurements from 100 mm up to 2000 mm over an I2C interface. It includes an optional interrupt pin that signals when new measurement data is ready. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Gary Bisson
|
a7a53f7482 |
dt-bindings: vendor-prefixes: Add Ezurio LLC
Ezurio is the new name of Laird Connectivity after it acquired Boundary Devices. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Gary Bisson <bisson.gary@gmail.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
Riccardo Mereu
|
d16ffac771 |
dt-bindings: vendor-prefixes: Add Arduino name
Add entry for Arduino SRL (https://arduino.cc) Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20251120155825.121483-2-r.mereu.kernel@arduino.cc Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Georg Gottleuber
|
a4c5af1a94 |
dt-bindings: vendor-prefixes: Add Medion AG
Add Medion AG, a German electronics company, to the list of vendor prefixes. Link: https://www.medion.com/ Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251204155212.230058-4-ggo@tuxedocomputers.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Georg Gottleuber
|
9f76530e52 |
dt-bindings: vendor-prefixes: Add prefix for TUXEDO Computers GmbH
TUXEDO Computers GmbH is a German supplier for computers. Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20251204155212.230058-2-ggo@tuxedocomputers.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Linus Torvalds
|
66a1025f7f |
Merge tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
|
||
|
Linus Torvalds
|
0cac5ce06e |
Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
||
|
Linus Torvalds
|
0a9431fa74 |
Merge tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
|
||
|
Linus Torvalds
|
6dfafbd029 |
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
||
|
Linus Torvalds
|
8f7aa3d3c7 |
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
Ettore Chimenti
|
ee4f232dd1 |
dt-bindings: vendor-prefixes: Add ASL Xiamen Technology
ASL Xiamen Technology Co. Ltd. is a Chinese high-speed interface and display system chip design company. Adding it to the vendor prefixes. Link: https://www.asl-tek.com/ Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org> Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251121142623.251118-2-ggo@tuxedocomputers.com |
||
|
Arnd Bergmann
|
9b418a3bfd |
Merge tag 'anlogic-initial-6.19-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/newsoc
Initial Anlogic Platform Support Add bindings for the serial and timer peripherals, and a basic soc dtsi for the Anlogic dr1v90 SoC. The Milianke MLKPAI FS01 is the first board for this SoC. Add myself as maintainer for this platform for the time being. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'anlogic-initial-6.19-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: MAINTAINERS: Setup support for Anlogic tree riscv: defconfig: Enable Anlogic SoC riscv: dts: anlogic: Add Milianke MLKPAI FS01 board riscv: dts: Add initial Anlogic DR1V90 SoC device tree riscv: Add Anlogic SoC famly Kconfig support dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER dt-bindings: riscv: Add Anlogic DR1V90 dt-bindings: riscv: Add Nuclei UX900 compatibles dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei |
||
|
Arnd Bergmann
|
c5dc31b2b4 |
Merge branch 'bst/newsoc' into soc/newsoc
This patch series introduces platform support for Black Sesame Technologies (BST) C1200 SoC and CDCU1.0 ADAS 4C2G board. BST is a leading automotive-grade computing SoC provider focusing on intelligent driving, computer vision, and AI capabilities for ADAS and autonomous driving applications. You can find more information about the SoC and related boards at: https://bst.ai This series provides the foundational platform enablement including device tree bindings, SoC and board device trees, platform configuration, and maintainer information. MMC/SDHCI driver support will be submitted in a separate patch series. * bst/newsoc: MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support arm64: defconfig: enable BST platform support arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs dt-bindings: arm: add Black Sesame Technologies (bst) SoC dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd. Link: https://lore.kernel.org/all/20251016120558.2390960-1-yangzh0906@thundersoft.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Albert Yang
|
9371cd4183 |
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
Black Sesame Technologies Co., Ltd.s a leading automotive-grade computing SoC and SoC-based intelligent vehicle solution provider. Link: https://bst.ai/. Signed-off-by: Albert Yang <yangzh0906@thundersoft.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andreas Kemnade
|
0d360d54ea |
dt-bindings: vendor-prefixes: Add Fitipower
Add Fitipower Integrated Technology Inc. to the vendor prefixes. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://patch.msgid.link/20251115-fp9931-submit-v3-1-92f5d0772b68@kemnade.info Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Fabio Estevam
|
9c1cd9e01c |
dt-bindings: vendor-prefixes: Add Raystar Optronics, Inc
Raystar Optronics is an LCD manufacturer based in Taiwan: https://www.raystar-optronics.com/ Add a vendor prefix for it. Signed-off-by: Fabio Estevam <festevam@nabladev.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251115025827.3113790-1-festevam@gmail.com |
||
|
Junhui Liu
|
c86ee66e14 |
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
Add vendor prefixes for "anlogic", "milianke" and "nuclei". These are required for describing the Milianke MLKPAI-FS01 board with DR1V90 SoC from Anlogic, which uses a processor core designed by Nuclei. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
|
Coia Prant
|
25802f8d16 |
dt-bindings: vendor-prefixes: Add 9Tripod
Add 9Tripod to the vendor prefixes. Signed-off-by: Coia Prant <coiaprant@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20251103171702.1518730-2-coiaprant@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Lad Prabhakar
|
19ab0a22ef |
dt-bindings: net: phy: vsc8531: Convert to DT schema
Convert VSC8531 Gigabit ethernet phy binding to DT schema format. While at it add compatible string for VSC8541 PHY which is very much similar to the VSC8531 PHY and is already supported in the kernel. VSC8541 PHY is present on the Renesas RZ/T2H EVK. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251025064850.393797-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lucas Zampieri
|
e95f66dd0e |
dt-bindings: vendor-prefixes: Add UltraRISC
Add vendor prefix for UltraRISC Technology Co., Ltd. Signed-off-by: Lucas Zampieri <lzampier@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251024083647.475239-2-lzampier@redhat.com |
||
|
Liangbin Lian
|
9e38dc1abc |
dt-bindings: vendor-prefixes: Document LinkEase
LinkEase is a company focusing on the research and development of network equipment and related software and hardware from Shenzhen. Add vendor prefix for it. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Liangbin Lian <jjm2473@gmail.com> Link: https://patch.msgid.link/20251014051226.64255-2-jjm2473@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Drew Fustini
|
fbf76e4bc2 |
dt-bindings: vendor-prefixes: Add Tenstorrent AI ULC
Document vendor prefix for Tenstorrent in DT bindings. Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Joel Stanley <jms@oss.tenstorrent.com> Signed-off-by: Drew Fustini <dfustini@oss.tenstorrent.com> |
||
|
Thomas Zimmermann
|
9b966ae422 |
Merge drm/drm-next into drm-misc-next
Updating drm-misc-next to the state of v6.18-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Linus Torvalds
|
58809f614e |
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
||
|
Linus Torvalds
|
05a54fa773 |
Merge tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
|
||
|
Linus Torvalds
|
0f048c878e |
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
|
||
|
Linus Torvalds
|
9792d660a4 |
Merge tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
|
||
|
Steffen Trumtrar
|
e3579cd78e |
dt-bindings: vendor-prefixes: Add JuTouch Technology Co, Ltd
JuTouch is a chinese touch screen supplier dedicated to manufacturing high-end touch display products for the global industrial market. (www.jutouch.com) Add a vendor prefix for it. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250821-v6-17-topic-imx8mp-skov-dts-jutouch-10inch-v1-1-b492ef807d12@pengutronix.de |
||
|
Kael D'Alcamo
|
33b6c8ed1d |
dt-bindings: vendor-prefixes: update regex for properties without a prefix
Update vendor-prefixes.yaml to allow property names without a prefix to contain '#' character in all positions Signed-off-by: Kael D'Alcamo <dev@kael-k.io> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Frank Li
|
4fea3336ef |
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
Add compatible string synaptics,synaptics_i2c for synaptics touch pad. It match existed driver drivers/input/mouse/synaptics_i2c.c. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Arnd Bergmann
|
5ab67bad49 |
Merge tag 'qcom-arm64-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualocmm Arm64 DeviceTree updates for v6.18 Introduce the Hamoa IoT SOM and the Hamoa EVK board, the HP Omnibook X14, the Particle Tachyon board, and the Samsung Galaxy S22. On IPQ5018 another set of UART and I2C controllers are added. On Lemans SDHCI and the camera subsystem is introduced, the USB controllers are updated to the new flattened binding. The Lemans EVK gains Ethernet definition, more QUP controllers and their GPI DMA engines are defined. PCIe, SDHCI, remoteproc and iris video accelerator are added as well. On the Monaco platform GPU and GMU are introduced, the USB controller nodes are updated to the new flattened binding. The GPU is enabled on the EVK and the Ride boards. SDCC and MDSS resets are defined on MSM8916, MSM8939 also gets the MDSS reset. On QCM2290 the camera clock interface is added. On the QCS615 tsens and related thermal-zones are introduced. On SDM845 the OnePlus 6 gains notifications LED, and the sensor core (SLPI) is enabled on the Samsung Galaxy S9. WiFi and Bluetooth is enabled on the SM8750 MTP. The IRIS video accelerator is introduce for X Elite and enabled on a variety of laptops. DisplayPort controllers on a variety of boards are updated to describe additional pixel clocks, used for MST. * tag 'qcom-arm64-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (57 commits) arm64: dts: qcom: Add MST pixel streams for displayport arm64: dts: qcom: sm6350: correct DP compatibility strings arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300: Add gpu and gmu nodes dt-bindings: arm: qcom: sort sm8450 boards arm64: dts: qcom: Add base HAMOA-IOT-EVK board arm64: dts: qcom: Add HAMOA-IOT-SOM platform dt-bindings: arm: qcom: Document HAMOA-IOT-EVK board arm64: dts: qcom: sm8750-mtp: Add WiFi and Bluetooth arm64: dts: qcom: msm8953-xiaomi-daisy: fix cd-gpios arm64: dts: qcom: ipq5018: add QUP1 UART2 node arm64: dts: qcom: lemans: Flatten usb controller nodes arm64: dts: qcom: qcs615: Enable TSENS support for QCS615 SoC arm64: dts: qcom: sdm845-enchilada: Add notification LED arm64: dts: qcom: apq8016-sbc: Drop redundant HDMI bridge status arm64: dts: qcom: apq8016-sbc: Correct HDMI bridge #sound-dai-cells arm64: dts: qcom: lemans: Add PCIe lane equalization preset properties arm64: dts: qcom: sm8450: enable camera clock controller by default arm64: dts: qcom: qcm2290: Add CCI node ... Link: https://lore.kernel.org/r/20250921022346.598294-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Mark Brown
|
5b65120115 |
ASoC: codecs: pcm1754: add pcm1754 dac driver
Merge series from Stefan Kerkmann <s.kerkmann@pengutronix.de>: Add a CODEC driver for the TI PCM1754. |
||
|
Bjorn Andersson
|
3bc3ff8fd2 |
dt-bindings: vendor-prefixes: Add Particle Industries
Particle is a San Francisco-based company providing an integrated IoT Platform-as-a-Service. https://www.particle.io/ Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250915-tachyon-v2-1-4f8b02a17512@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Arnd Bergmann
|
a3ef7cad8b |
Merge tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.18 Add support for Lenovo Thinkbook 16, Dell Inspiron 7441, Dell Latitude 7455, Samsung Galaxy S20, Billion Capture+, the Monaco EVK and the Lemans EVK. The SDM845 Cheza development boards are removed, as they are not longer in use. For IPQ5018 crypto, tsens, rng, SPI NAND support is dded, the two MDIO buses are added and the internal GE PHY. IPQ5424 gets CPU frequency scaling and a missing UART. The SA8775P SoC is remaned Lemans, to reduce confusion about the chip name. The IoT memory map introduced and made the default, GDSP FastRPC and GPR nodes are added. Touch keys are enabled on the BQ Aquaris X5 Plus. On QCM2290 the video accelerator is enabled, so is HS timing modes for eMMC. The QCS615 platform is renamed SM6150. CPU frequency scaling and the WiFi PCIe controller is introduced. On Monaco (QCS8300) scaling of L3 and DDR bandwidth is introduced. So is eMMC support and generic packer router (GPR). On the Monaco Ride board, the eMMC controller is enabled. On QRB220 RB1, the venus video accelerator is enabled. For SC7280 the first PCIe controller and PHY is introduced. SoundWire, LPASS, and USB offload support is added, the codecs and sound card is then described on the QCM6490 IDP. The MDSS core reset is introduced, to clear bootloader configuration on SC7280-based devices. On Fairphone5, USB audio offload is added. AudioReach support on SC7280 (QCS6490) is introduced and used to enable sound on the RB3Gen2 board. The video clock controller is added to SC8180X. On SC8280XP the GPI DMA controllers are described and enabled. Display and GPU is enabled for the Fairphone 3 and charging is enabled on the Google Pixel 3a. The routing for the second USB connector on the Lenovo Yoga C630 is described. On SM6150 ADSP and CDSP FastRPC is introduced, as is the video encoder/decoder (venus). On SM6350 RPMh statistics is enabled, the USB audio offload DAI is introduced and on Fairphone4 the USB audio offload support is enabled. On SM8450 QRD the PMIC GLINK is described, to add USB Type-C and battery functionality. On SM8650 ACD levels are added for the GPU. Camera and video clock controllers power-domains are updated on SM8450, SM8550, and SM8650, now that support for multiple power-domains is accepted. SM8750 gains bwmon support for dynamic bus scaling, and PCIe nodes. The DWC3 glue and core nodes are flattened on a number of platforms. USB Type-C DisplayPort support is extended to 4 lanes (from 2) on a variety of platforms, now that the QMP PHY driver supports this. Platform specific RPMh PD constants are replaced with generic constants wherever possible. On X Elite the PM8010 is disabled by default, removing boot splats on a variety of boards without this PMIC, the video clock controller is added. For the X Elite and X Plus CRDs, and the Lenovo Thinkpad T14s, HBR3 is marked as valid for the external DisplayPorts. The fingerprint reader found on the CRDs are enabled. The PCIe x8 slot on the QCP is enabled. The two Microsoft Surface Laptop 7 gains WiFi and Bluetooth support. GPU support is added for the X Plus SoC. * tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (208 commits) arm64: dts: qcom: x1e80100: Update GPU OPP table arm64: dts: qcom: sm8650: Drop redundant status from PMK8550 RTC arm64: dts: qcom: add initial support for Samsung Galaxy S20 dt-bindings: arm: qcom: document x1q board binding arm64: dts: qcom: sm8250-samsung-r8q: Move common parts to dtsi arm64: dts: qcom: lemans-evk: Add sound card arm64: dts: qcom: lemans: Add gpr node arm64: dts: qcom: x1e78100-t14s-oled: Add eDP panel arm64: dts: qcom: qcs615-ride: enable venus node to initialize video codec arm64: dts: qcom: sm6150: add venus node to devicetree arm64: dts: qcom: x1e80100-romulus: Add WCN7850 Wi-Fi/BT arm64: dts: qcom: qrb2210-rb1: Enable Venus arm64: dts: qcom: qcm2290: Add Venus video node arm64: dts: qcom: monaco-evk: Add sound card arm64: dts: qcom: qcs8300: Add gpr node arm64: dts: qcom: qcs8300: Add Monaco EVK board dt-bindings: arm: qcom: Add Monaco EVK support arm64: dts: qcom: qcm6490-idp: Add sound card arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec arm64: dts: qcom: qcs6490-rb3gen2: Add sound card ... Link: https://lore.kernel.org/r/20250911233600.3033675-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
46cb19e52a |
Merge tag 'v6.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: FriendlyElec NanoPi Zero2, ArmSoM Sige1, Radxa ROCK 2A/2F,
HINLINK H66K / H68K .
Interesting new peripherals: I guess the most interesting one is likely
the NPU on RK3588. The rocket driver has been merged into both the DRM
tree as well as mainline Mesa.
Other stll interesting ones are DW-Displayport on RK3588, DSI on RK3576
(missing soc pwm-support to be useful on most boards), thermal support
and watchdog on RK3576.
The rest peripheral additions on a number of boards (Beelink A1,
Pine{phone,book}, rk3576-evb1-v10, Rock 5*, ...)
* tag 'v6.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX
arm64: dts: rockchip: Enable DisplayPort for rk3588s Cool Pi 4B
arm64: dts: rockchip: Add DP1 for rk3588
arm64: dts: rockchip: Add DP0 for rk3588
arm64: dts: rockchip: Add FriendlyElec NanoPi Zero2
dt-bindings: arm: rockchip: Add FriendlyElec NanoPi Zero2
arm64: dts: rockchip: Add ArmSoM Sige1
dt-bindings: arm: rockchip: Add ArmSoM Sige1
arm64: dts: rockchip: Add Radxa ROCK 2A/2F
dt-bindings: arm: rockchip: Add Radxa ROCK 2A/2F
dt-bindings: soc: rockchip: add missing clock reference for rk3576-dcphy syscon
arm64: dts: rockchip: add USB3 on Beelink A1
arm64: dts: rockchip: add SPDIF audio to Beelink A1
arm64: dts: rockchip: add IR receiver to rk3328-roc
arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro
arm64: dts: rockchip: Enable the NPU on NanoPi R6C/R6S
arm64: dts: rockchip: enable NPU on OPI5/5B
arm64: dts: rockchip: Add Bluetooth on rk3576-evb1-v10
arm64: dts: rockchip: Add WiFi on rk3576-evb1-v10
...
Link: https://lore.kernel.org/r/5241735.C4sosBPzcN@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Dave Airlie
|
0d9f0083f7 |
Merge tag 'v6.17-rc6' into drm-next
This is a backmerge of Linux 6.17-rc6, needed for msm, also requested by misc. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Wig Cheng
|
09b26dce32 |
dt-bindings: vendor-prefixes: Add Mayqueen name
Mayqueen is a Taiwan-based company primarily focused on the development of arm64 development boards and e-paper displays. Signed-off-by: Wig Cheng <onlywig@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250902-drm-v5-1-d77c678c4ae3@gmail.com |
||
|
Rob Herring (Arm)
|
4ed4607327 |
dt-bindings: vendor-prefixes: Add undocumented vendor prefixes
Add various vendor prefixes which are in use in compatible strings already. These were found by modifying vendor-prefixes.yaml into a schema to check compatible strings. The added prefixes doesn't include various duplicate prefixes in use such as "lge". Link: https://lore.kernel.org/r/20250821222136.1027269-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Cristian Cozzolino
|
922e16d177 |
dt-bindings: vendor-prefixes: Add Flipkart
Add Flipkart to the vendor prefixes. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Link: https://lore.kernel.org/r/20250811-rimob-initial-devicetree-v4-1-b3194f14aa33@protonmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Arnd Bergmann
|
58770c8759 |
Merge tag 'ixp4xx-dts-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
IXP4xx DTS updates for v6.18: Add the Actiontec router MI424WR A/C and D device trees. Prerequisite DT bindings have been merged in networking and GPIO git trees: https://lore.kernel.org/netdev/175106401649.2079310.16035106613106076029.git-patchwork-notify@kernel.org/ https://lore.kernel.org/linux-gpio/175614780274.8817.4717113656972710108.b4-ty@linaro.org/ * tag 'ixp4xx-dts-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: Add ixp4xx Actiontec MI424WR device trees dt-bindings: arm: ixp4xx: List actiontec devices dt-bindings: Add Actiontec vendor prefix Link: https://lore.kernel.org/r/CACRpkdZoDCXgsTGzUUWABbp_r1Xjv7vp7_NjEnEWzMmDQG+UJQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Walleij
|
400915493f |
dt-bindings: Add Actiontec vendor prefix
Actiontec is a US manufacturer of telecom equipment. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250822-ixp4xx-mi424wr-dts-v2-1-cc804884474d@linaro.org |
||
|
Linus Torvalds
|
fab1beda75 |
Merge tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring: - Fix a memory leak for of_pci_add_properties() failure case. Then fix the introduced UAF. - Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource() - Add already in use vendor prefix "eswin" - Clarify "of of" comment in of_match_device(). After many years of drive-by patches dropping the 2nd "of" (which referred to OpenFirmware), a correct patch finally arrived * tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: dynamic: Fix use after free in of_changeset_add_prop_helper() dt-bindings: vendor-prefixes: add eswin of: reserved_mem: Add missing IORESOURCE_MEM flag on resources of: dynamic: Fix memleak when of_pci_add_properties() failed of: Clarify OF device context in of_match_device() comment |