yamllint has a quoted string check. Enable the check aligned with the
DT schema style which is only using quotes when necessary with the
exception of regex patterns. There's also the frequent occurrence of '/'
which we allow rather than fixing.
Link: https://lore.kernel.org/all/20230324202243.2442956-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Georgi writes:
interconnect changes for 6.6
This pull request contains the interconnect changes for the 6.6-rc1 merge
window which is a mix of core and driver changes with the following highlights:
Core changes:
- New generic test client driver that allows issuing bandwidth requests
between endpoints via debugfs.
- Annotate all structs with flexible array members with the __counted_by
attribute.
- Introduce new icc_bw_lock for cases where we need to serialize bandwidth
aggregation and update to decouple that from paths that require memory
allocation.
Driver changes:
- Move the Qualcomm SMD RPM bus-clocks from CCF to interconnect framework
where they actually belong. This brings power management improvements
and reduces the overhead and layering. These changes are in immutable
branch that is being pulled also into the qcom tree.
- Fixes for QUP nodes on SM8250.
- Enable sync_state and keepalive for QCM2290.
- Enable sync_state for SM8450.
- Improve enable_mask-based BCMs handling and fix some bugs.
- Add compatible string for the OSM-L3 on SDM670.
- Add compatible strings for SC7180, SM8250 and SM6350 bandwidth monitors.
- Expand and retire the DEFINE_QNODE and DEFINE_QBCM macros, which have
become ugly beasts with many different arguments.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (64 commits)
interconnect: Add debugfs test client
interconnect: Reintroduce icc_get()
debugfs: Add write support to debugfs_create_str()
interconnect: qcom: icc-rpmh: Retire DEFINE_QBCM
interconnect: qcom: sm8350: Retire DEFINE_QBCM
interconnect: qcom: sm8250: Retire DEFINE_QBCM
interconnect: qcom: sm8150: Retire DEFINE_QBCM
interconnect: qcom: sm6350: Retire DEFINE_QBCM
interconnect: qcom: sdx65: Retire DEFINE_QBCM
interconnect: qcom: sdx55: Retire DEFINE_QBCM
interconnect: qcom: sdm845: Retire DEFINE_QBCM
interconnect: qcom: sdm670: Retire DEFINE_QBCM
interconnect: qcom: sc7180: Retire DEFINE_QBCM
interconnect: qcom: icc-rpmh: Retire DEFINE_QNODE
interconnect: qcom: sm8350: Retire DEFINE_QNODE
interconnect: qcom: sm8250: Retire DEFINE_QNODE
interconnect: qcom: sm8150: Retire DEFINE_QNODE
interconnect: qcom: sm6350: Retire DEFINE_QNODE
interconnect: qcom: sdx65: Retire DEFINE_QNODE
interconnect: qcom: sdx55: Retire DEFINE_QNODE
...
Updates for v6.6, which includes a backmerge of msm-fixes to avoid conficts.
Core:
- SM6125 MDSS support
DPU:
- SM6125 DPU support
- Added subblocks to display snapshot
- Use UBWC data from MDSS driver rather than duplicating it
- dpu_core_perf cleanup
DSI:
- Enabled burst mode to fix CMD mode panels
- Runtime PM support
- refgen regulator support
DSI PHY:
- SM6125 support in 14nm DSI PHY driver
GPU:
- Rework GPU identification to prepare for a7xx, and other a7xx prep
- Cleanups and fixes
- Disallow legacy relocs on a6xx and newer
- a690: switch to using a660_gmu.bin fw as this is what we have in
linux-firmware and we see no evidence that it should be different
from other a660 family (a6xx subgen 4) devices
- Submit overhead opts, 1.6x faster for NO_IMPLICIT_SYNC commits with
100 BOs to 2.5x faster for 1000 BOs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv_01g-edjdfKLWWcb-rO5aSyLsv5FpbKrTkXVL9+ngTQ@mail.gmail.com
Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
chips. The functionality will be provided by the existing pca954x driver.
For chips that are powered off by default add a regulator called vdd-supply.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Only some of the PCA954x compatible ICs have interrupt
capability, but the binding advertises it on all ICs.
Sync the dt-binding with the driver and only advertise it on:
- nxp,pca9542
- nxp,pca9543
- nxp,pca9544
- nxp,pca9545
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Merge series from Xingyu Wu <xingyu.wu@starfivetech.com>:
This patch series adds I2S support for the StarFive JH7110 RISC-V
SoC based on Designware I2S controller. There has three I2S channels
(RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and
two for playback(TX).
The first patch adds support for the StarFive JH7110 SoC in the
Designware I2S bindings.
The second patch adds the ops to get data from platform bus in the
I2S driver.
The third patch adds support for the StarFive JH7110 SoC in
the Designware I2S driver.
The fourth patch fixes the name of I2STX1 pinmux.
The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts.
This patch series is based on Linux-next(20230818) which is merge
clock, syscon and dma nodes for the StarFive JH7110 SoC.
The series has been tested and works normally on the VisionFive 2
board by plugging an audio expansion board.
A lot of home routers have NVMEM fixed cells containing MAC address that
need some further processing. In ~99% cases MAC needs to be:
1. Optionally parsed from ASCII format
2. Increased by a vendor-picked value
There was already an attempt to design a binding for that at NVMEM
device level in the past. It wasn't accepted though as it didn't really
fit NVMEM device layer.
The introduction of NVMEM fixed-cells layout seems to be an opportunity
to provide a relevant binding in a clean way.
This commit adds a *generic* compatible string: "mac-base". As always it
needs to be carefully reviewed.
OpenWrt project currently supports ~300 home routers that have NVMEM
cell with binary-stored base MAC.T hose devices are manufactured by
multiple vendors. There are TP-Link devices (76 of them), Netgear (19),
D-Link (11), OpenMesh (9), EnGenius (8), GL.iNet (8), ZTE (7),
Xiaomi (5), Ubiquiti (6) and more. Those devices don't share an
architecture or SoC.
Another 200 devices have base MAC stored in an ASCII format (not all
those devices have been converted to DT though).
It would be impractical to provide unique "compatible" strings for NVMEM
layouts of all those devices. It seems like a valid case for allowing a
generic binding instead. Even if this binding will not be sufficient for
some further devices it seems to be useful enough as it is.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230823132744.350618-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the StarFive JH7110 (TX0/TX1/RX channel) SoC support in the bindings
of Designware I2S controller. The I2S controller needs two reset items
to work properly on the JH7110 SoC. And TX0 channel as master mode needs
5 clock items and TX1/RX channels as slave mode need 9 clock items on
the JH7110 SoC. The RX channel needs System Register Controller property
to enable it and other platforms do not need it.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230821144151.207339-2-xingyu.wu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pattern for the nodename only allows t-phy@... , however, for the case
when the t-phy has no `reg` and only `ranges` (basically when the t-phy
is just a parent node), dtc will throw this warning:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
For a node like this:
sata_phy: t-phy@1a243000 {
ranges;
sata_port: sata-phy@1a243000 {
reg = <0 0x1a243000 0 0x0100>;
};
};
it is normal that the parent node 't-phy' would be without any address, as in:
sata_phy: t-phy {
ranges;
sata_port: sata-phy@1a243000 {
reg = <0 0x1a243000 0 0x0100>;
};
};
because being just a holder it does not have its own reg.
However the binding does not allow such a name for the t-phy, so with this
patch, making the `@[0-9a-f]+` part optional, such node is possible.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230814093931.9298-1-eugen.hristev@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This pull request contains Broadcom ARM-based Device Tree changes for
6.6, please pull the following:
- Arinc adds support for the Asus RT-AC3100 router based upon the
BCM47094 SoC
- Krzysztof splits interrupt properties per cell such that they are mode
readable and adds missing spaces in front of node names/labels
- Rafal updates the BCM5301X DTS to correct PCIe, SPI over GPIO
properties. He describes the Ethernet links to internal switch ports
and then updates the BCM53573 binding and Ethernet properties by
declaring the BCM53125 external switch on port 5, add Ethernet links
and
disables the second Ethernet MAC on Luxul devices.
- Dan describes the Wi-Fi regulatory mappings for Luxul devices
- Stanislav updates the bcm28155 DTS to use node labels
- Linus adds SEAMA compatible properties to MTD partitions
- Aleksey updates the Linksys EA6500 v2 to have the full 256MiB of DRAM
available
- Stefan updates a number of BCM283x nodes to confirm to DTS schema:
pinctrl, DMA controllers and PWM cells.
* tag 'arm-soc/for-6.6/devicetree' of https://github.com/Broadcom/stblinux: (23 commits)
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3100
ARM: dts: broadcom: split interrupts per cells
ARM: dts: BCM53573: Disable second Ethernet on Luxul devices
ARM: dts: BCM53573: Add Ethernet interfaces links
ARM: dts: BCM53573: Add BCM53125 switch port 5
ARM: dts: BCM53573: Describe BCM53125 switch ports in the main DTS
ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port
ARM: dts: bcm28155-ap: use node labels
ARM: dts: bcm5301x: Add SEAMA compatibles
ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2
dt-bindings: arm: bcm: add BCM53573 SoCs family binding
ARM: dts: BCM53573: Use updated "spi-gpio" binding properties
ARM: dts: BCM53573: Add cells sizes to PCIe node
ARM: dts: BCM53573: Drop nonexistent #usb-cells
ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger
ARM: dts: BCM5301X: Add Ethernet interfaces links
ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul devices
ARM: dts: broadcom: add missing space before {
...
Link: https://lore.kernel.org/r/20230818164539.2871539-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
