RISC-V Devicetrees for v6.6 Part 2
T-Head:
Add a second minimal devicetree for the second board using the th1520
SoC, the BeagleV Ahead. As with the Lichee Pi 4a, this is sufficient
only for booting to a console, with work on the mmc, clocks and ethernet
sides of things under way. A relicense to a dual licence for the
existing devicetree files is also done, for good measure.
RISC-V Devicetrees for v6.6-pt2
StarFive:
Fix the sort order of some nodes that I resolved incorrectly during a
merge conflict.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
riscv: dts: starfive: fix jh7110 qspi sort order
Link: https://lore.kernel.org/r/20230819-unwieldy-railing-9bba2b176aa7@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits)
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
arm64: dts: qcom: msm8998: Add DPU1 nodes
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
arm64: dts: qcom: sdx75-idp: Add regulator nodes
arm64: dts: qcom: sdx75: Add rpmhpd node
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
arm64: dts: qcom: Add pmx75 PMIC dtsi
arm64: dts: qcom: Add pm7550ba PMIC dtsi
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
arm64: dts: qcom: sdx75: Add spmi node
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
...
Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.
Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).
Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).
Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)
RK3399 got the PCIe endpoint node when used as a PCIe-client.
And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.
* tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
arm64: dts: rockchip: add rk3588 PCIe2 support
arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
arm64: dts: rockchip: Add NanoPC T6
dt-bindings: arm: rockchip: Add NanoPC T6
arm64: dts: rockchip: Enable SATA on Radxa E25
arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
arm64: dts: rockchip: switch px30-engicam to enable-gpios
arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios
arm64: dts: rockchip: add PCIe3 support for rk3588
arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
arm64: dts: rockchip: add USB2 to rk3588s-rock5a
arm64: dts: rockchip: add USB2 to rk3588-rock5b
arm64: dts: rockchip: add USB2 to rk3588-evb1
arm64: dts: rockchip: add USB2 support for rk3588
arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
arm64: dts: rockchip: Enable RTC for edgeble-neu6b
arm64: dts: rockchip: Enable SATA for edgeble-neu6b
...
Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.6, round 1
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
* tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (29 commits)
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
ARM: dts: stm32: add touchscreen on stm32f746-disco board
ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
ARM: dts: stm32: re-add CAN support on stm32f746
...
Link: https://lore.kernel.org/r/c0524a16-ab27-0cb5-8e7b-c12f7bde7e0d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add an optional AXI DMA property 'xlnx,irq-delay'. It specifies interrupt
timeout value and causes the DMA engine to generate an interrupt after the
delay time period has expired. Timer begins counting at the end of a packet
and resets with receipt of a new packet or a timeout event occurs.
This property is useful when AXI DMA is connected to the streaming IP i.e
axiethernet where inter packet latency is critical while still taking the
benefit of interrupt coalescing.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1691387509-2113129-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Aspeed pinctrl bindings are missing an additionalProperties/
unevaluatedProperties schemas on the child pin mux nodes which means any
undefined properties are allowed. In addition, using
'additionalProperties' for child nodes with any name works better than a
pattern matching everything with an if/then schema to select nodes only.
With 'additionalProperties' added, 'pins' and 'bias-disable'
properties need to be added as they were not defined. A $ref to
pinmux-node.yaml which defines the common property types was also
missing.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819010907.916061-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rename ti-omap5-opp-supply to be bit more generic omap-opp-supply and
convert the free text binding to json-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC.
Properties should be described only once, thus having separate pattern
for children just to specify the $ref to regulator.yaml is not correct.
It also makes impossible to finish it with
additional/unevaluatedProperties:false to restrict allowed properties in
regulator node.
Merge the patterns, so each regulator subnode has regulator.yaml $ref,
additional properties and ends with additionalProperties:false. This
points to missing regulator-min/max-microvolt in LDO4 node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726065633.74924-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
There's no need for 'additionalProperties' in the if/then schema as there's
already 'unevaluatedProperties' in the parent schema. With
'additionalProperties' dropped, 'compatible' and 'phandle' don't need
to be listed in the conditional schemas as 'compatible' is already in
the main section and 'phandle' will be implicitly added.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230726033554.174365-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add micro-USB connector under "muic" node to properly represent the
hardware. Deprecate also the old "max77693-muic" in favor of generic
"muic" (this is max77693, so there is no need to state it in its child
nodes). This "muic" node is used only to instantiate MUIC driver by
compatible, thus actual Linux driver changes are needed. Extend the
example with this new code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230723142842.98204-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
This converts the STMPE MFD device tree bindings to the YAML
schema.
Reference the existing schema for the ADC, just define the
other subnode schemas directly in the MFD schema.
Add two examples so we have examples covering both the simple
GPIO expander and the more complex with ADC and touchscreen.
Some in-tree users do not follow the naming conventions for nodes
so these DTS files need to be augmented to use proper node names
like "adc", "pwm", "gpio", "keyboard-controller" etc before the
bindings take effect on them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230709-stmpe-dt-bindings-v5-1-34a3d6ee1e57@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Pull pin control fixes from Linus Walleij:
"Fixes two issues with the Qualcomm SA8775P platform:
- Some minor device tree binding flunky that is nice to iron out but
more importantly:
- Support the increased interrupt targets mask from 3 to 4 bits,
making interrupts with higher (hardware) numbers work"
* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant
Since the interrupt and I2C lines of AW2013 operate in open drain low
active mode a pull-up supply is needed for correct operation.
Unfortunately there is no ideal place to describe it in the DT: The
pull-up needed for the I2C lines could be described on the I2C bus.
However, the pull-up needed for the interrupt line belongs neither
directly to the interrupt controller nor to AW2013. Since the AW2013
driver will be typically in control of the power management and
interrupt masking it makes more sense to describe it inside the AW2013
device tree node.
Add it to the AW2013 DT schema together with a comment that makes it
clear what exactly it represents.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230815-aw2013-vio-v3-2-2505296b0856@gerhold.net
Signed-off-by: Lee Jones <lee@kernel.org>
