If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
The drm sched entity must be flushed before finishing, to account for
jobs potentially still in flight at that time.
Lima did not do this flush until now, so switch the destroy call to the
drm_sched_entity_destroy() wrapper which will take care of that.
This fixes a regression on lima which started since the rework in
commit 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
where some specific types of applications may hang indefinitely.
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606143247.433018-1-nunes.erico@gmail.com
Moving display-specific runtime info initialization into display/ makes
the display code more self-contained and also makes it easier to call
from the Xe driver.
v2:
- Drop unnecessary display/ prefix from #includes. (Jani)
- Clear runtime info if fusing leaves no pipes remaining, the same as
we do when fusing indicates the entire display controller is
unavailable. (Jani)
- Move adjustment of DRIVER_MODESET / DRIVER_ATOMIC after call to
intel_display_device_info_runtime_init(); HAS_DISPLAY may have
changed to false during the runtime init. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602181450.1151368-1-matthew.d.roper@intel.com
Before we add the second step of the MTL HuC auth (via GSC), we need to
have the ability to differentiate between them. To do so, the huc
authentication check is duplicated for GuC and GSC auth, with
GSC-enabled binaries being considered fully authenticated only after
the GSC auth step.
To report the difference between the 2 auth steps, a new case is added
to the HuC getparam. This way, the clear media driver can start
submitting before full auth, as partial auth is enough for those
workloads.
v2: fix authentication status check for DG2
v3: add a better comment at the top of the HuC file to explain the
different approaches to load and auth (John)
v4: update call to intel_huc_is_authenticated in the pxp code to check
for GSC authentication
v5: drop references to meu and esclamation mark in huc_auth print (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-5-daniele.ceraolospurio@intel.com
In the previous patch we extracted the offset of the legacy-style HuC
binary located within the GSC-enabled blob, so now we can use that to
load the HuC via DMA if the fuse is set that way.
Note that we now need to differentiate between "GSC-enabled binary" and
"loaded by GSC", so the former case has been renamed to "has GSC headers"
for clarity, while the latter is now based on the fuse instead of the
binary format. This way, all the legacy load paths are automatically
taken (including the auth by GuC) without having to implement further
code changes.
v2: s/is_meu_binary/has_gsc_headers/, clearer logs (John)
v3: split check for GSC access, better comments (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-4-daniele.ceraolospurio@intel.com
The new binaries that support the 2-step authentication contain the
legacy-style binary, which we can use for loading the HuC via DMA. To
find out where this is located in the image, we need to parse the
manifest of the GSC-enabled HuC binary. The manifest consist of a
partition header followed by entries, one of which contains the offset
we're looking for.
Note that the DG2 GSC binary contains entries with the same names, but
it doesn't contain a full legacy binary, so we need to skip assigning
the dma offset in that case (which we can do by checking the ccs).
Also, since we're now parsing the entries, we can extract the HuC
version that way instead of using hardcoded offsets.
Note that the GSC binary uses the same structures in its binary header,
so they've been added in their own header file.
v2: fix structure names to match meu defines (s/CPT/CPD/), update commit
message, check ccs validity, drop old version location defines.
v3: drop references to the MEU tool to reduce confusion, fix log (John)
v4: fix log for real (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-3-daniele.ceraolospurio@intel.com
Now that each FW has its own reserved area, we can keep them always
pinned and skip the pin/unpin dance on reset. This will make things
easier for the 2-step HuC authentication, which requires the FW to be
pinned in GGTT after the xfer is completed.
Since the vma is now valid for a long time and not just for the quick
pin-load-unpin dance, the name "dummy" is no longer appropriare and has
been replaced with vma_res. All the functions have also been updated to
operate on vma_res for consistency.
Given that we pin the vma behind the allocator's back (which is ok
because we do the pinning in an area that was previously reserved for
thus purpose), we do need to explicitly re-pin on resume because the
automated helper won't cover us.
v2: better comments and commit message, s/dummy/vma_res/
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-2-daniele.ceraolospurio@intel.com
Apparently desktop gen3 parts don't support the
10bit gamma mode at all. Stop claiming otherwise.
As is the case with pipe A on gen3 mobile parts, the
PIPECONF gamma mode bit can be set but it has no
effect on the output.
PNV seems to be the only slight exception, but generally
the desktop PNV variant looks more like a mobile part so
this is not entirely surprising.
Fixes: 67630bacae ("drm/i915: Add 10bit gamma mode for gen2/3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531135625.3467-1-ville.syrjala@linux.intel.com
For conflict avoidance we need the following commit:
c9a9f18d3a drm/i915/huc: use const struct bus_type pointers
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The clk_bulk API already provides error messages indicating which
specific clock in the request for which the operation failed, further
more these errors are associated with the specific DisplayPort
controller (rather than the shared drm_device). The additional error
messages int he dp_power module does thereby not provide any benefit.
While at it, none of the dp_power handles passed to these functions are
dynamic in nature, so there should not be any need for runtime checking
them. Drop these as well.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/536938/
Link: https://lore.kernel.org/r/20230515030256.300104-2-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MSM8226 uses a modified PLL lock sequence compared to MSM8974, which is
based on the function dsi_pll_enable_seq_m in the msm-3.10 kernel.
Worth noting that the msm-3.10 downstream kernel also will try other
sequences in case this one doesn't work, but during testing it has shown
that the _m sequence succeeds first time also:
.pll_enable_seqs[0] = dsi_pll_enable_seq_m,
.pll_enable_seqs[1] = dsi_pll_enable_seq_m,
.pll_enable_seqs[2] = dsi_pll_enable_seq_d,
.pll_enable_seqs[3] = dsi_pll_enable_seq_d,
.pll_enable_seqs[4] = dsi_pll_enable_seq_f1,
.pll_enable_seqs[5] = dsi_pll_enable_seq_c,
.pll_enable_seqs[6] = dsi_pll_enable_seq_e,
We may need to expand this in the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/540618/
Link: https://lore.kernel.org/r/20230308-msm8226-mdp-v3-6-b6284145d67a@z3ntu.xyz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently DSC flushing happens during interface configuration at
dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from
dpu_hw_ctl_intf_cfg_v1() by adding dpu_hw_ctl_update_pending_flush_dsc_v1()
to handle both per-DSC engine and DSC flush bits at same time to make it
consistent with the location of flush programming of other DPU sub-blocks.
Changes in v10:
-- rewording commit text
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- ctx->pending_dsc_flush_mask = 0;
Changes in v11:
-- add Fixes tag
Changes in v12:
-- move dsc parameter to next line at dpu_encoder_dsc_pipe_cfg()
Changes in v14:
-- Fixes tag had been move to 1st patch of this series
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539506/
Link: https://lore.kernel.org/r/1685036458-22683-9-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There are two tiers of pending flush control, top level and
individual hardware block. Currently only the top level of
flush mask is reset to 0 but the individual pending flush masks
of particular hardware blocks are left at their previous values,
eventually accumulating all possible bit values and typically
flushing more than necessary.
Reset all individual hardware block flush masks to 0 to avoid
accidentally flushing them.
Changes in V13:
-- rewording commit text
-- add an empty space line as suggested
Changes in V14:
-- add Fixes tag
Fixes: 73bfb790ac ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539508/
Link: https://lore.kernel.org/r/1685036458-22683-8-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
