The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
panel_edp_remove() always returned zero, so convert it to return void
without any loss and then just drop the return from
panel_edp_platform_remove().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530074216.2195962-1-u.kleine-koenig@pengutronix.de
In addition to the already defined REQUEST HXG message format,
which is used when sender expects some confirmation or data,
HXG protocol includes definition of the FAST REQUEST message,
that may be used when sender does not expect any useful data
to be returned.
Using this instead of GUC_HXG_TYPE_EVENT for non-blocking CTB requests
will allow GuC to send back GUC_HXG_TYPE_RESPONSE_FAILURE in case of
errors.
Note that it is not possible to return such errors to the caller,
since this is for non-blocking calls and the related fence is not
stored. Instead such messages are treated as unexpected, which will
give an indication of potential GuC misprogramming that warrants extra
debugging effort.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526235538.2230780-2-John.C.Harrison@Intel.com
Allow compute contexts to submit the maximal amount of work without
blocking userspace.
The original size for user LRC ring's (SZ_16K) was chosen to minimise
memory consumption, without being so small as to frequently stall in the
middle of workloads. With the main consumers being GL / media pipelines
of 2 or 3 batches per frame, we want to support ~10 requests in flight
to allow for the application to control throttling without stalling
within a frame.
v2:
- cover with else part
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517135754.1110291-1-tejas.upadhyay@intel.com
VLV has a so called "wide gamut color correction" unit (WGC).
What it is is a 3x3 matrix similar to the later CHV CGM
CSC, with less precisions/range. In fact CHV also has the WGC
but using it there doesn't really make sense when you have the
superior CGM CSC around.
Hook up the necessary stuff to expose the WGC as the CTM
crtc property.
One additional crazy idea that came to mind would be to use
the WGC as an output CSC on CHV for YCbCr output. But it
would be incompatible with the legacy LUT usage. In fact
since the WGC lacks post-offsets we'd probably have to
use the legacy LUT to do that final part of the RGB->YCbCr
conversion. Sounds doable, but perhaps not worth the hassle.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
On CHV toggling the CGM CSC on/off while the pipe is running leads
to underruns. Looks like we'd have to do the toggling strictly inside
the start_of_vblank-frame_start window to avoid this, but that window
is less than a scanline so there's no way we can guarantee hitting it.
As a workaround let's just leave the CGM CSC permanently enabled.
Fortunately the CGM gamma/degamma units don't seem to suffer from
this malady.
I also tried turning off CGM unit clock gating, but that did not
help.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The previous setting was related to the overall dimension and not to the
active display area.
In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the
following parameters:
----------------------------------------------------------
| Item | Specifications | unit |
----------------------------------------------------------
| Display area | 98.7 (W) x 57.5 (H) | mm |
----------------------------------------------------------
| Overall dimension | 105.5(W) x 67.2(H) x 4.96(D) | mm |
----------------------------------------------------------
Fixes: 966fea78ad ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: fixed Fixes commit id length]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com
The high-speed clock is hard-coded to the burst-clock
frequency specified in the device tree. However, when
using devices like certain bridge chips without burst mode
and varying resolutions and refresh rates, it may be
necessary to set the high-speed clock dynamically based
on the desired pixel clock for the connected device.
This also removes the need to set a clock speed from
the device tree for non-burst mode operation, since the
pixel clock rate is the rate requested from the attached
device like a bridge chip. This should have no impact
for people using burst-mode and setting the burst clock
rate is still required for those users. If the burst
clock is not present, change the error message to
dev_info indicating the clock use the pixel clock.
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-7-aford173@gmail.com
According to Table 13-45 of the i.MX8M Mini Reference Manual, the min
and max values for M and the frequency range for the VCO_out
calculator were incorrect. This information was contradicted in other
parts of the mini, nano and plus manuals. After reaching out to my
NXP Rep, when confronting him about discrepencies in the Nano manual,
he responded with:
"Yes it is definitely wrong, the one that is part
of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P,
PMS_M and PMS_S is not correct. I will report this to Doc team,
the one customer should be take into account is the Table 13-40
DPHY PLL Parameters and the Note above."
These updated values also match what is used in the NXP downstream
kernel.
To fix this, make new variables to hold the min and max values of m
and the minimum value of VCO_out, and update the PMS calculator to
use these new variables instead of using hard-coded values to keep
the backwards compatibility with other parts using this driver.
Fixes: 4d562c70c4 ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-3-aford173@gmail.com
On sc7280 where eDP is the primary display, PSR is causing
IGT breakage even for basic test cases like kms_atomic and
kms_atomic_transition. Most often the issue starts with below
stack so providing that as reference
Call trace:
dpu_encoder_assign_crtc+0x64/0x6c
dpu_crtc_enable+0x188/0x204
drm_atomic_helper_commit_modeset_enables+0xc0/0x274
msm_atomic_commit_tail+0x1a8/0x68c
commit_tail+0xb0/0x160
drm_atomic_helper_commit+0x11c/0x124
drm_atomic_commit+0xb0/0xdc
drm_atomic_connector_commit_dpms+0xf4/0x110
drm_mode_obj_set_property_ioctl+0x16c/0x3b0
drm_connector_property_set_ioctl+0x4c/0x74
drm_ioctl_kernel+0xec/0x15c
drm_ioctl+0x264/0x408
__arm64_sys_ioctl+0x9c/0xd4
invoke_syscall+0x4c/0x110
el0_svc_common+0x94/0xfc
do_el0_svc+0x3c/0xb0
el0_svc+0x2c/0x7c
el0t_64_sync_handler+0x48/0x114
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
[drm-dp] dp_ctrl_push_idle: PUSH_IDLE pattern timedout
Other basic use-cases still seem to work fine hence add a
a module parameter to allow toggling psr enable/disable till
PSR related issues are hashed out with IGT.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/534420/
Link: https://lore.kernel.org/r/20230427232848.5200-1-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The datasheet describes the following initialization flow including
minimum delay times between each step:
1. DSI data lanes need to be in LP-11 and the clock lane in HS mode
2. toggle EN signal
3. initialize registers
4. enable PLL
5. soft reset
6. enable DSI stream
7. check error status register
To meet this requirement we need to make sure the host bridge's
pre_enable() is called first by using the pre_enable_prev_first
flag.
Furthermore we need to split enable() into pre_enable() which covers
steps 2-5 from above and enable() which covers step 7 and is called
after the host bridge's enable().
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: ceb515ba29 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> #TQMa8MxML/MBa8Mx
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503163313.2640898-3-frieder@fris.de
At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"
1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.
[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Printing the other clock types should not be conditioned on being able
to print OD_SCLK. Some GPUs currently have limited capability of only
printing a subset of these.
Since this condition was introduced in v5.18-rc1, reading from
`pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15
(2021).
Fixes: 79c65f3fcb ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jonatas Esteves <jntesteves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For platforms with GMD_ID support (i.e., everything MTL and beyond),
identification of the display IP present should be based on the contents
of the GMD_ID register rather than a PCI devid match.
Note that since GMD_ID readout requires access to the PCI BAR, a slight
change to the driver init sequence is needed --- pci_enable_device() is
now called before i915_driver_create().
v2:
- Fix use of uninitialized i915 pointer in error path if
pci_enable_device() fails before the i915 device is created. (lkp)
- Use drm_device parameter to intel_display_device_probe. This goes
against i915 conventions, but since the primary goal here is to make
it easy to call this function from other drivers (like Xe) and since
we don't need anything from the i915 structure, this seems like an
exception where drm_device is a more natural fit.
v3:
- Go back do drm_i915_private for intel_display_device_probe. (Jani)
- Move forward decl to top of header. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-6-matthew.d.roper@intel.com
