The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Add a YAML DT binding document for this device.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-3-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The RK356x (and RK3588) have 5 ganged interrupts. For example the
"legacy" interrupt combines "inta/intb/intc/intd" with a register
providing the details, which specific interrupt triggered. The
interrupts from the second level are part of the Synopsys DW PCIe
System Information Interface (SII). Some of them are listed in the
Interrupt Signals section, the others are mostly common SII output
signals. The grouping and the ganged interrupt controllers are
specific to the Rockchip implementation.
Currently the binding is not specifying these interrupts resulting
in a bunch of errors for all rk356x/rk3588 boards using PCIe.
Fix this by specifying the interrupts and add them to the example
to prevent regressions.
This changes the reference from snps,dw-pcie.yaml to
snps,dw-pcie-common.yaml, since the interrupts are vendor
specific and should not be listed in the generic file. The
only other bit from the generic binding are the reg-names,
which are overwritten by this binding.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-3-sebastian.reichel@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Starting with commit 3e37c9d48f ("dt-bindings: hwmon: Convert lm75
bindings to yaml") 'national,lm75' has it's own dedicated (YAML) binding.
If kept in this file device specific properties as 'vs-supply' are
considered excessive. Remove compatible here so it can be checked with
more specific binding.
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: sensor@48: 'vs-supply' does not
match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/trivial-devices.yaml
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230810144451.1459985-2-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Almost every board machine / sound cards has "audio-routing" and "model"
properties, so move them to common schema to have only one definition of
these properties.
For amlogic,gx-sound-card, drop the minItems: 2 from the
"audio-routing", because any limit here - lower or upper- is rather
meaningless. This will also fix `dtbs_check` warnings like:
meson-gxm-s912-libretech-pc.dtb: sound: audio-routing: ['AU2 INL', 'ACODEC LOLN', 'AU2 INR', 'ACODEC LORN', '7J4-14 LEFT', 'AU2 OUTL', '7J4-11 RIGHT', 'AU2 OUTR'] is too long
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810063300.20151-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The isl12022 has a built-in support for monitoring the voltage of the
backup battery, and setting bits in the status register when that
voltage drops below two predetermined levels (usually 85% and 75% of
the nominal voltage). However, since it can operate at wide range of
battery voltages (2.5V - 5.5V), one must configure those trip levels
according to which battery is used on a given board.
Add bindings for defining these two trip levels. While the register
and bit names suggest that they should correspond to 85% and 75% of
the nominal battery voltage, the data sheet also says
There are total of 7 levels that could be selected for the first
alarm. Any of the of levels could be selected as the first alarm
with no reference as to nominal Battery voltage level.
Hence this provides the hardware designer the ability to choose values
based on the discharge characteristics of the battery chosen for the
given product, rather than just having one battery-microvolt property
and having the driver choose levels close to 0.85/0.75 times that.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230615105826.411953-4-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Qualcomm pinctrl changes for v6.6
1. Add support for the SM6115 and SM8350 LPASS (Low Power Audio
SubSystem) TLMM pin controllers.
2. Add bindings for the Qualcomm PMC8180 and PMC8180C PMICs GPIO pin
controllers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
TI K3 device tree updates for v6.6
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
arm64: dts: ti: verdin-am62: Add DSI display support
arm64: dts: ti: Add support for the AM62P5 Starter Kit
arm64: dts: ti: Introduce AM62P5 family of SoCs
dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
arm64: dts: ti: k3-am69-sk: Add phase tags marking
arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
arm64: dts: ti: k3-j784s4: Add phase tags marking
arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
arm64: dts: ti: k3-am62-main: Add node for DSS
arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-*: fix fss node dtbs check warnings
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
...
Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expenses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V Devicetrees for v6.6
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
riscv: dts: starfive: jh7110: Fix GMAC configuration
riscv: dts: starfive - Add hwrng node for JH7110 SoC
riscv: dts: starfive - Add crypto and DMA node for JH7110
riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
riscv: dts: starfive: jh7110: add dma controller node
riscv: dts: starfive: Add spi node and pins configuration
riscv: dts: starfive: Add USB dts node for JH7110
riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
riscv: dts: starfive: jh7110: Add syscon nodes
riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
...
Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory controller drivers for v6.6
1. Tegra:
- Extend support for Tegra234 SoC Memory Controllers with DRM and GPU
clients.
- Tegra186: Skip MRQ DVFS where it is not supported and do not fail
probe.
2. Wide cleanup of DT includes.
3. Devicetree bindings:
- Reference common peripheral (client) properties in Ingenic NEMC and
TI GPMC.
- Convert Davicom DM9000 to DT schema.
* tag 'memory-controller-drv-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: add MC client for Tegra234 GPU
dt-bindings: net: davicom,dm9000: convert to DT schema
dt-bindings: memory-controllers: reference TI GPMC peripheral properties
dt-bindings: memory-controllers: ingenic,nemc: reference peripheral properties
memory: Explicitly include correct DT includes
memory: tegra: Prefer octal over symbolic permissions
memory: tegra: add check if MRQ_EMC_DVFS_LATENCY is supported
memory: tegra: Add clients used by DRM in Tegra234
memory: tegra: sort tegra234_mc_clients table as per register offsets
memory: tegra: make icc_set_bw return zero if BWMGR not supported
memory: tegra: Add dummy implementation on Tegra194
Link: https://lore.kernel.org/r/20230814120052.27485-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the clock dt-binding file for Audio Clock Mux. which
is the IP for i.MX8QM, i.MX8QXP, i.MX8DXL.
Add the clockid for clocks in header file.
The Audio Clock Mux is binded with all the audio IP and audio clocks
in the subsystem, so need to list the power domain of related clocks
and IPs. Each clock and IP has a power domain, so there are so many
power domains.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1690260984-25744-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add a new PSGMII mode which is similar to QSGMII with the difference being
that it combines 5 SGMII lines into a single link compared to 4 on QSGMII.
It is commonly used by Qualcomm on their QCA807x PHY series.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 6.5-rc6 that resolve
some reported issues. Included in here are:
- bunch of iio driver fixes for reported problems
- interconnect driver fixes
- counter driver build fix
- cardreader driver fixes
- binder driver fixes
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: tps6594-esm: Disable ESM for rev 1 PMIC
misc: rtsx: judge ASPM Mode to set PETXCFG Reg
binder: fix memory leak in binder_init()
iio: cros_ec: Fix the allocation size for cros_ec_command
tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure
iio: imu: lsm6dsx: Fix mount matrix retrieval
iio: adc: meson: fix core clock enable/disable moment
iio: core: Prevent invalid memory access when there is no parent
iio: frequency: admv1013: propagate errors from regulator_get_voltage()
counter: Fix menuconfig "Counter support" submenu entries disappearance
dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
iio: light: bu27008: Fix intensity data type
iio: light: bu27008: Fix scale format
iio: light: bu27034: Fix scale format
iio: adc: ad7192: Fix ac excitation feature
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
...
Reset controller updates for v6.6
Clean up DT includes and remove unneeded platform_set_drvdata() calls
across reset drivers, add support for the Versal NET platform to the
zynqmp driver, and let the hisilicon driver use dev_err_probe().
* tag 'reset-for-v6.6' of git://git.pengutronix.de/pza/linux:
reset: ti: syscon: remove unneeded call to platform_set_drvdata()
reset: zynqmp: removed unneeded call to platform_set_drvdata()
reset: zynq: remove unneeded call to platfrom_set_drvdata()
reset: uniphier-glue: remove unneeded call to platform_set_drvdata()
reset: npcm: remove unneeded call to platform_set_drvdata()
reset: meson: remove unneeded call to platform_set_drvdata()
reset: lpc18xx: remove unneeded call to platform_set_drvdata()
reset: lantiq: remove unneeded call to platform_set_drvdata()
reset: bcm6345: remove unneeded call to platform_set_drvdata()
reset: ath79: remove unneeded call to platform_set_drvdata()
reset: hisilicon: Use dev_err_probe instead of dev_err
reset: reset-zynqmp: add support for Versal NET platform
dt-bindings: reset: Updated binding for Versal-NET reset driver
reset: Explicitly include correct DT includes
Link: https://lore.kernel.org/r/20230808145950.3057250-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic drivers changes for v6.6:
- Add C3 Power Domains
- Explicitly include correct DT includes in Amlogic SoC drivers
- fix to avoid potential NULL pointer dereference in meson_sm
- Merge of genpd-v6.5-rc1-1 to move genpd amlogic drivers
* tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson_sm: fix to avoid potential NULL pointer dereference
soc: amlogic: Explicitly include correct DT includes
soc: c3: Add support for power domains controller
dt-bindings: power: add Amlogic C3 power domains
soc: amlogic: use name instead of index as criterion
Link: https://lore.kernel.org/r/77e328b5-0d47-36e8-f62d-c745df06fb87@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
