i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
imx8mn has only one USB interface. The platform supports using as USB host
(default), or switch to USB DR using this overlay.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Several Freescale Layerscape platforms extirq binding use a malformed
interrupt-map property missing parent address cells. These are
documented in of_irq_imap_abusers list in drivers/of/irq.c. In order to
enable dtc interrupt_map check tree wide, we need to disable it for
these platforms which will not be fixed (as that would break
compatibility).
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-1-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for the new version, v1.2, of Apalis Evaluation Board.
Because only imx8-apalis-eval.dtsi was available and used as the only
board configuration for board version v1.0 and v1.1, it was changed to
be the common hardware configurations for all versions v1.0,
v1.1 and v1.2. Also, two .dtsi board files were added to have the
differences by board. The .dts were organized by SoM and board version.
Board versions v1.0 and v1.1 are compatible with each other and should
use imx8qm-apalis-eval.dts file or imx8qm-apalis-v1.1-eval.dts file
depending on SoM version. Now for v1.2, organized by SoM version too, the
files are imx8qm-apalis-eval-v1.2.dts and imx8qm-apalis-v1.1-eval-v1.2.dts.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DTSI for Variscite VAR-SOM-MX93 System on Module and DTS for Variscite
VAR-SOM-MX93 on Symphony evaluation board.
This version comes with:
- NXP i.MX 93 Dual, 1.7GHz, Cortex-A55 + Cortex-M33
- 2 GB of RAM
- 16GB eMMC
- 802.11ax/ac/a/b/g/n WiFi with 5.3 Bluetooth
- CAN bus
- Audio codec
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8XQP and TQMa8XDP modules on MBa8Xx board.
As the only difference is the mounted SoC, both module and baseboard
files are shared.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Dimonoff gateway EVK board is based on a Variscite
VAR-SOM-NANO, with a NXP MX8MN nano CPU and also based on a Symphony
mx8mn EVK.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RVE gateway board is based on a Variscite VAR-SOM-NANO,
with a NXP MX8MN nano CPU.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an overlay for the supported LVDS display AUO G133HAN01.
Configure the video PLL frequency to exactly match typical pixel clock of
141.200 MHz.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa93xx module and MBa93xxCA starterkit mainboard.
TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and
some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and
secure element.
TQMa93xxLA is a solder on type SOM and can be used on MBa93XXCA using an
adapter. TQMa93xxCA is a feature compatible, socketable type SOM.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the TQMLS1043A and TQMLS1046A SOM and the
MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout
and can be used on the MBLS10xxA.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the SolidRun LX2162A System on Module (SoM), and the
Clearfog evaluation board.
The SoM has few software-controllable features:
- AR8035 Ethernet PHY
- eMMC
- SPI Flash
- fan controller
- various eeproms
The Clearfog evaluation board provides:
- microSD connector
- USB-A
- 2x 10Gbps SFP+
- 2x 25Gbps SFP+ with a retimer
- 8x 2.5Gbps RJ45
- 2x mPCI (assembly option / disables 2xRJ45)
The 8x RJ45 ports are connected with an 8-port PHY: Marvell 88E2580
supporting up to 5Gbps, while SoC and magnetics are limited to 2.5Gbps.
However 2500 speed is untested due to documentation and drivier
limitations. To avoid confusion the phy nodes have been explicitly
limited to 1000 for now.
The PCI nodes are disabled, but explicitly added to mark that this board
can have pci.
It is expected that the bootloader will patch the status property
"okay" and disable 2x RJ45 ports, according to active serdes configuration.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
phyGATE-Tauri uses a phyCORE-i.MX8MM SoM. Add device tree for the board.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX fixes for 6.6:
- A couple of i.MX8MP device tree changes from Adam Ford to fix clock
configuration regressions caused by 16c9845248 ("arm64: dts: imx8mp:
don't initialize audio clocks from CCM node").
- Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree.
- Fix a mmemory leak with error handling path of imx_dsp_setup_channels()
in imx-dsp driver.
- Fix HDMI node in imx8mm-evk device tree.
- Add missing clock enable functionality for imx8mm_soc_uid() function
in soc-imx8m driver.
- Add missing imx8mm-prt8mm.dtb build target.
imx8mm-prt8mm.dts was not getting built. Add it to the build.
Fixes: 58497d7a13 ("arm64: dts: imx: add Protonic PRT8MM board")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This overlay enables the DSI-LVDS display chain and configures the
actual panel compatible.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This overlay enables the DSI-LVDS display chain and configures the
actual panel compatible. Also add the DSIM supply voltages.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This overlay enables the DSI-LVDS display chain and configures the
actual panel compatible. Also add the DSIM supply voltages.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW74xx MIPI_GPIO4 (IMX8MP GPIO1_IO4) so we use this as a gpio
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Example configuration:
media-ctl -l "'imx219 3-0010':0->'csis-32e40000.csi':0[1]"
media-ctl -v -V "'imx219 3-0010':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'crossbar':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'mxc_isi.0':0 [fmt:SRGGB8/640x480 field:none]"
v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=RGGB
v4l2-ctl --stream-mmap --stream-to=frame.raw --stream-count=1
convert -size 640x480 -depth 8 gray:frame.raw frame.png
gst-launch-1.0 v4l2src ! \
video/x-bayer,format=rggb,width=640,height=480,framerate=10/1 ! \
bayer2rgb ! fbdevsink
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the Debix SOM A + SOM A I/O board. The commit enables
only the basic features like:
- 2x UART
- 2x Network
- eMMC/µSD
- CAN
- QSPI
- USB Host / Device
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mp-venice-gw73xx-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW73xx Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with SPI
- off-board I/O connector with I2C, and GPIO
- off-board I/O connector with MIPI DSI, MIPI CSI, I2C, and GPIO
- off-board I/O connector with RS232 and RS485
- EERPOM
- USB 3.0 HUB
- USB 3.0 TypeA socket
- USB 2.0 Micro-B OTG socket
- Accelerometer
- 1x GbE (eQoS)
- 1x GbE (PCI)
- PCIe clock generator
- PCIe switch
- 2x full-length miniPCIe socket with PCI and USB2.0
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) SIM, and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
- on-board 802.11abgnac with Bluetooth 5.2
- Wide range DC input supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mp-venice-gw72xx-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW72xx Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with SPI
- off-board I/O connector with I2C, and GPIO
- off-board I/O connector with MIPI DSI, MIPI CSI, I2C, and GPIO
- off-board I/O connector with RS232 and RS485
- EERPOM
- USB 3.0 HUB
- USB 3.0 TypeA socket
- USB 2.0 Micro-B OTG socket
- Accelerometer
- 1x GbE (eQoS)
- 1x GbE (PCI)
- PCIe clock generator
- PCIe switch
- 1x full-length miniPCIe socket with PCI and USB2.0
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) SIM, and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
- Wide range DC input supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mm-venice-gw7905-0x consists of a SOM + baseboard.
The GW700x SOM contains the following:
- i.MX8M Mini SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- FEC GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 2.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW7905 Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB 3.0 HUB
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa93xx module and MBa93xxLA SBC board.
TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and
some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and
secure element.
TQMa93xxLA is a solder on type SOM and can be used directly on MBa93XXLA.
TQMa93xxCA is a feature compatible, socketable type SOM.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix typo in imx8mm-venice-gw72xx-0x-imx219 overlay causing it to use
gw73xx configuration.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mp-venice-gw7905-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- RGMII PHY (eQoS)
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW7905 Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB 3.0 HUB
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree support for the i.MX8MM Based Emtop SOM-IMX8MMLPD4 (V1)
and IMX8M Mini Baseboard (V1).
Currently supported are serial console, eMMC.
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the i.MX8MM-EVKB [1] devicetree support. The EVKB is basically the
same device except for the different used PMIC.
[1] https://www.nxp.com/design/development-boards/ \
i-mx-evaluation-and-development-boards/ \
evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
[m.felsch@pengutronix.de: Adapt the commit message]
[m.felsch@pengutronix.de: Include Shawns feedback]
[m.felsch@pengutronix.de: Fix the regulator settings]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK3 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR, CAN, M.2 E-Key or M.2 M-Key PCIe, USB .
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The previous patch added the device tree to support Toradex Apalis
iMX8 [1] aka QuadMax a computer on module which can be used on
different carrier boards which this patch introduces.
The module consists of an NXP i.MX 8 family SoC (either i.MX 8QuadMax or
8QuadPlus), two PF8100 PMICs, a KSZ9131 Gigabit Ethernet PHY, 2, 4 or 8
GB of LPDDR4 RAM, an eMMC, an SGTL5000 analogue audio codec, an USB3503A
USB HSIC hub, an optional I2C EEPROM plus an optional Bluetooth/Wi-Fi
module.
Anything that is not self-contained on the module is disabled by
default.
The carrier board device trees contained in this patch include the
module's device tree and enable the supported peripherals of the
carrier board.
Some level of display functionality just landed upstream but requires
further integration/testing on our side. Therefore, currently only
basic console UART, eMMC and Ethernet functionality work fine.
As there is no i.MX 8QuadPlus device tree upstream those have been
dropped. However, apart from an error message during boot about it
failing to bring up the second Cortex-A72 core this boots fine on
QuadPlus' as well.
[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add new carrier board device tree Yavia for the Verdin iMX8M Plus SoM.
Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.
Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add new carrier board device tree Yavia for the Verdin iMX8M Mini SoM.
Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.
Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Beacon Embedded has an i.MX8M Plus development kit which consists
of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC,
and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
PHY.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The display timings have to be specified explicitly. Using the typical pixel
clock, the LDB clock can not be configured as the 7-fold of that.
By setting pixel clock to 74.25 MHz, LDB can be configured to exactly
519.75 MHz.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the initial support for the i.MX8MM Cloos PHG board.
This board uses a imx8mm-tqma8mqml SoM from TQ-Group.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
