There is no reason to consider the setup of Data Stolen Memory fatal on
dgfx and non-fatal on integrated. Move the debug and error propagation
around so both have the same behavior: non-fatal. Before this change,
loading i915 on a system with TGL + DG2 would result in just TGL
succeeding the initialization (without stolen).
Now loading i915 on the same system with an injected failure in
i915_gem_init_stolen():
$ dmesg | grep stolen
i915 0000:00:02.0: [drm] Injected failure, disabling use of stolen memory
i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup
i915 0000:03:00.0: [drm] Injected failure, disabling use of stolen memory
i915 0000:03:00.0: [drm:init_stolen_lmem [i915]] Skip stolen region: failed to setup
Both GPUs are still available:
$ sudo build/tools/lsgpu
card1 Intel Dg2 (Gen12) drm:/dev/dri/card1
└─renderD129 drm:/dev/dri/renderD129
card0 Intel Tigerlake (Gen12) drm:/dev/dri/card0
└─renderD128 drm:/dev/dri/renderD128
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915-stolen-v2-3-20ff797de047@intel.com
Add some helpers: adjust_stolen(), request_smem_stolen_() and
init_reserved_stolen() that are now called by i915_gem_init_stolen() to
initialize each part of the Data Stolen Memory region.
Main goal is to split the reserved part within the stolen, also known as
WOPCM, as its calculation changes often per platform and is a big source
of confusion when handling stolen memory.
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915-stolen-v2-2-20ff797de047@intel.com
Although the bspec lists several MMIO ranges as "MSLICE," it turns out
that a subset of these are of a "GAM" subclass that has unique rules and
doesn't followed regular mslice steering behavior.
* Xe_HP SDV: GAM ranges must always be steered to 0,0. These
registers share the regular steering control register (0xFDC) with
other steering types
* DG2: GAM ranges must always be steered to 1,0. GAM registers have a
dedicated steering control register (0xFE0) so we can set the value
once at startup and rely on implicit steering. Technically the
hardware default should already be set to 1,0 properly, but it never
hurts to ensure that in the driver.
Bspec: 66534
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014345.3317739-1-matthew.d.roper@intel.com
drm/i915 feature pull #2 for v6.1:
Features and functionality:
- More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha)
- Allow seamless M/N changes on eDP panels that support it (Ville)
- Switch DSC debugfs from output bpp to input bpc (Swati)
Refactoring and cleanups:
- Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville)
- Plenty of VBT definition and parsing updates and cleanups (Ville)
- Extract SKL watermark code to a separate file, and clean up (Ville)
- Clean up IPC interfaces and debugfs (Jani)
- Continue moving display data under drm_i915_private display sub-struct (Jani)
- Display quirk handling refactoring and abstractions (Jani)
- Stop using implicit dev_priv in gmbus registers (Jani)
- BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani)
- Use drm_dp_phy_name() for logging (Jani)
- Use REG_BIT() macros for CDCLK registers (Stan)
- Move display and media IP versions to runtime info (Radhakrishna)
Fixes:
- Fix DP MST suspend to avoid use-after-free (Andrzej)
- Fix HPD suspend to avoid use-after-free for fbdev (Andrzej)
- Fix various PSR issues regarding selective update and damage clips (Jouni)
- Fix runtime pm wakerefs for driver remove and release (Mitul Golani)
- Fix conditions for filtering fixed modes for panels (Ville)
- Fix TV encoder clock computation (Ville)
- Fix dvo mode_valid hook return type (Nathan Huckleberry)
Merges:
- Backmerge drm-next to sync the DP MST atomic changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7vfr064.fsf@intel.com
Due to i915_perf assuming that it can use the i915_gem_context reference
to protect its i915->gem.contexts.list iteration, we need to defer removal
of the context from the list until last reference to the context is put.
However, there is a risk of triggering kernel warning on contexts list not
empty at driver release time if we deleagate that task to a worker for
i915_gem_context_release_work(), unless that work is flushed first.
Unfortunately, it is not flushed on driver release. Fix it.
Instead of additionally calling flush_workqueue(), either directly or via
a new dedicated wrapper around it, replace last call to
i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue()
that performs both tasks.
Fixes: 75eefd8258 ("drm/i915: Release i915_gem_context from a worker")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: stable@kernel.org # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 1cec344424)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Due to i915_perf assuming that it can use the i915_gem_context reference
to protect its i915->gem.contexts.list iteration, we need to defer removal
of the context from the list until last reference to the context is put.
However, there is a risk of triggering kernel warning on contexts list not
empty at driver release time if we deleagate that task to a worker for
i915_gem_context_release_work(), unless that work is flushed first.
Unfortunately, it is not flushed on driver release. Fix it.
Instead of additionally calling flush_workqueue(), either directly or via
a new dedicated wrapper around it, replace last call to
i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue()
that performs both tasks.
Fixes: 75eefd8258 ("drm/i915: Release i915_gem_context from a worker")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: stable@kernel.org # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-2-janusz.krzysztofik@linux.intel.com
MTL has separate forcewake tables for the primary/render GT and the
media GT; each GT's intel_uncore will use a separate forcewake table and
should only initialize the domains that are relevant to that GT. The GT
ack register also moves to a new location of (GSI base + 0xDFC) on this
platform.
Note that although our uncore handlers take care of transparently
redirecting all register accesses in the media GT's GSI range to their
new offset at 0x380000, the forcewake ranges listed in the table should
use the final, post-translation offsets.
NOTE: There are two ranges in the media IP that have multicast
registers where the two register instances reside in different power
wells (either VD0 or VD2). We don't have an easy way to deal with this
today (and in fact we don't even access these register ranges in the
driver today), so for now we just mark those ranges as FORCEWAKE_ALL
which will cause all of the media power wells to be grabbed, ensuring
proper operation. If we start reading/writing in those ranges in the
future, we can re-visit whether it's worth adding extra steering
complexity into our forcewake support.
Bspec: 67788, 67789, 52077
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910001631.1986601-1-matthew.d.roper@intel.com
drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
Instead of calling read_clock_frequency() to walk the if/else ladder
per platform, move the ladder to intel_gt_init_clock_frequency() and
use one function per branch.
With the new logic, it's now clear the call to
gen9_get_crystal_clock_freq() was just dead code, as gen9 is handled by
another function and there is no version 10. Remove that function and
the caller.
v2: Correctly handle intel_gt_check_clock_frequency() that also calls
the function to read clock frequency (Gustavo)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908-if-ladder-v2-2-7a7b15545c93@intel.com
Continue converting the driver to the convention of last version first,
extending it to the future platforms. Now, any GRAPHICS_VER >= 11 will
be handled by the first branch.
With the new ranges it's easier to see what platform a branch started to
be taken. Besides the >= 11 change, the branch taken for GRAPHICS_VER == 10
is also different, but currently there is no such platform in i915.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908-if-ladder-v2-1-7a7b15545c93@intel.com
The earlier update to support reduced versioning of firmware files
introduced an issue with the firmware override module parameter. A
self test would specify an invalid file name (invalid meaning not in
the table) both with and without setting the override flag. The
*non-override* case would cause an infinite loop. I.e. a situation
that is impossible to hit outside of the selftest because either the
file name has come from the table in first place or it came from an
override. However, the override case was also broken in that it would
bypass some of the later processing.
The first fix is to update the scanning loop code so that if an
invalid file is passed in, it will exit rather than loop forever. So
if the impossible situation did somehow occur in the future, it
wouldn't be such a big problem.
The second flips the logic on the override early exit to be negative
rather than positive. That way if an explicit override has been set,
then it won't try to scan for backup options (because there is no
point anyway - the user wanted X and if X is not available, that's
their problem). It also means that it won't skip code that still needs
to be run once a valid firmware file has been selected.
v2: Also remove ANSI colour codes that accidentally got left in an
error message in the original patch.
Fixes: 665ae9c9ca ("drm/i915/uc: Support for version reduced and multiple firmware files")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914005821.3702446-2-John.C.Harrison@Intel.com
Release all mmap mapping for all lmem objects which are associated
with userfault such that, while pcie function in D3hot, any access
to memory mappings will raise a userfault.
Runtime resume the dgpu(when gem object lies in lmem).
This will transition the dgpu graphics function to D0
state if it was in D3 in order to access the mmap memory
mappings.
v2:
- Squashes the patches. [Matt Auld]
- Add adequate locking for lmem_userfault_list addition. [Matt Auld]
- Reused obj->userfault_count to avoid double addition. [Matt Auld]
- Added i915_gem_object_lock to check
i915_gem_object_is_lmem. [Matt Auld]
v3:
- Use i915_ttm_cpu_maps_iomem. [Matt Auld]
- Fix 'ret == 0 to ret == VM_FAULT_NOPAGE'. [Matt Auld]
- Reuse obj->userfault_count as a bool 0 or 1. [Matt Auld]
- Delete the mmaped obj from lmem_userfault_list in obj
destruction path. [Matt Auld]
- Get a wakeref for object destruction patch. [Matt Auld]
- Use intel_wakeref_auto to delay runtime PM. [Matt Auld]
v4:
- Avoid using mmo offset to get the vma_node. [Matt Auld]
- Added comment to use the lmem_userfault_lock. [Matt Auld]
- Get lmem_userfault_lock in i915_gem_object_release_mmap_offset.
[Matt Auld]
- Fixed kernel test robot generated warning.
v5:
- Addressed the cosmetics comments. [Andi]
- Changed i915_gem_runtime_pm_object_release_mmap_offset() name to
i915_gem_object_runtime_pm_release_mmap_offset() to be rhythmic.
PCIe Specs 5.3.1.4.1
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6331
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913152714.16541-3-anshuman.gupta@intel.com
