Support for reading the fuses to check what are the Link Copy engines
was added in commit ad5f74f342 ("drm/i915/pvc: read fuses for link
copy engines"). However they were added unconditionally because the
FUSE3 register is present since graphics version 10.
However the bitfield with meml3 fuses only exists since graphics version
12. Moreover, Link Copy engines are currently only available in PVC.
Tying additional copy engines to the meml3 fuses is not correct for
other platforms.
Make sure there is a check for `12.60 <= ver < 12.70`. Later platforms
may extend this function later if it's needed to fuse off copy engines.
Currently it's harmless as the Link Copy engines are still not exported:
info->engine_mask only has BCS0 set and the register is only read for
platforms that do have it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912-copy-engine-v1-1-ef92fd81758d@intel.com
drm_plane_state->src is modified when offset is calculated:
before calculation:
src.x1 = 8192, src.y1 = 8192
after calculation (pitch = 65536, cpp = 4, alignment = 262144)
src.x1 = 8192, src.y1 = 0, offset = 0x20000000
Damage clips are relative to original coodrdinates provided by
user-space. To compare these against src coordinates we need to use
original coordinates as provided by user-space. These can be obtained
by using drm_plane_state_src.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823112920.352563-3-jouni.hogander@intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
The TV encoder has its own special clocking strategy,
which means we can't just use intel_crtc_dotclock() to
figure out what the resulting dotclock will be given
the actual DPLL port_clock. Additionally the DPLL can't
always generate exactly the frequency we initially asked
for. This results in us computing a bogus dotclock/etc.,
and it won't match the readout which is handled by the
encoder itself properly. Naturally the state checker
becomes unhappy with the mismatch.
To do this sanely we'll need to move the DPLL computation
into encoder->compute_config() so that all the derived
state gets correctly computed based on the actual DPLL
output frequency. Start doing that just for the TV encoder
initally as intel_crtc_dotclock() should be able to handle
other encoder types well enough. Though eventually this
should be done for all encoder types rather than
doing it from intel_crtc_compute_config().
With this we actually do some of the DPLL state computation
twice, but we can skip the second actual .find_dpll() search
by flagging .clock_set=true after we've done it once. We also
still need to avoid clobbering the correct
adjusted_mode.crtc_clock set up by encoder->compute_config()
when called a second time from intel_crtc_compute_config().
Fixes: 665a7b0409 ("drm/i915: Feed the DPLL output freq back into crtc_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909205932.32537-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
From Meteorlake, Latency Level, SAGV bloack time are read from
LATENCY_SAGV register instead of the GT driver pcode mailbox. DDR type
and QGV information are also to be read from Mem SS registers.
v2:
- Simplify MTL_MEM_SS_INFO_QGV_POINT macro(MattR)
- Nit: Rearrange the bit def's from higher to lower(MattR)
- Restore platform definition for ADL-P(MattR)
- Move back intel_qgv_point def to intel_bw.c(Jani)
v3:
- Rebase
Bspec: 64636, 64608
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Original Author: Caz Yokoyama
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902060342.151824-9-radhakrishna.sripada@intel.com
Add support for display power wells on MTL. The differences from XE_LPD:
- The AUX HW block is moved to the PICA block, where the registers are on
an always-on power well and the functionality needs to be powered on/off
via the AUX_CH_CTL register: [1], [2]
- The DDI IO power on/off programming sequence is moved to the PHY PLL
enable/disable sequence. [3], [4], [5]
Bspec: [1] 49233, [2] 65247, [3] 64568, [4] 65451, [5] 65450
v2:
- Update the comment in aux power well enable
- Reuse the noop sync fn for aux sync.
- Use REG_BIT for new register bit definitions
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902060342.151824-7-radhakrishna.sripada@intel.com
Top-level handling of standalone media interrupts will be processed as
part of the primary GT's interrupt handler (since primary and media GTs
share an MMIO space, unlike remote tile setups). When we get down to
the point of handling engine interrupts, we need to take care to lookup
VCS and VECS engines in the media GT rather than the primary.
There are also a couple of additional "other" instance bits that
correspond to the media GT's GuC and media GT's power management
interrupts; we need to direct those to the media GT instance as well.
Bspec: 45605
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-15-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
GT non-engine registers (referred to as "GSI" registers by the spec)
have the same relative offsets on standalone media as they do on the
primary GT, just with an additional "GSI offset" added to their MMIO
address. If we store this GSI offset in the standalone media's
intel_uncore structure, it can be automatically applied to all GSI reg
reads/writes that happen on that GT, allowing us to re-use our existing
GT code with minimal changes.
Forcewake and shadowed register tables for the media GT (which will be
added in a future patch) are listed as final addresses that already
include the GSI offset, so we also need to add the GSI offset before
doing lookups of registers in one of those tables.
v2:
- Add comment on raw_reg_*() macros explaining why we don't bother with
GSI offsets in them. (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908224550.821257-1-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We're going to introduce an additional intel_gt for MTL's media unit
soon. Let's provide a bit more multi-GT initialization framework in
preparation for that. The initialization will pull the list of GTs for
a platform from the device info structure. Although necessary for the
immediate MTL media enabling, this same framework will also be used
farther down the road when we enable remote tiles on xehpsdv and pvc.
v2:
- Re-add missing test for !HAS_EXTRA_GT_LIST in intel_gt_probe_all().
v3:
- Move intel_gt_definition struct to intel_gt_types.h. (Jani)
- Drop gtdef->setup(). For now we'll just use a switch() based on GT
type since we don't have too many different handlers for the
foreseeable future. (Jani)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-6-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Unmapping of the MMIO range can be done as a DRM-managed action, which
will take care of the unmapping on device teardown and error paths.
This will also ensure proper ordering with respect to other DRM-managed
actions that we'll be using to clean up non-primary GTs in upcoming
patches.
We have not yet enabled any non-root GTs in the driver yet, so the
kfree() of the GT structure is effectively dead code. When we do start
enabling non-root GTs in upcoming patches, those are going to be using
DRM-managed allocations tied to the device lifetime, so we don't need to
explicitly free them (and kfree would be incorrect anyway).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-5-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The original intent of intel_uncore_mmio_debug as described in commit
0a9b26306d ("drm/i915: split out uncore_mmio_debug") was to be a
singleton structure that could be shared between multiple GTs' uncore
objects in a multi-tile system. Somehow we went off track and
started allocating separate instances of this structure for each GT,
which defeats that original goal.
But in reality, there isn't even a need to share the mmio_debug between
multiple GTs; on all modern platforms (i.e., everything after gen7)
unclaimed register accesses are something that can only be detected for
display registers. There's no point in grabbing the debug spinlock and
checking for unclaimed accesses on an uncore used by an xehpsdv or pvc
remote tile GT, or the uncore used by a mtl standalone media GT since
all of the display accesses go through the primary intel_uncore.
The simplest solution is to simply leave uncore->debug NULL on all
intel_uncore instances except for the primary one. This will allow us
to avoid the pointless debug spinlock acquisition we've been doing on
MMIO accesses coming in through these intel_uncores.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-3-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
UAPI Changes:
- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
Even more details at:
https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html
Driver Changes:
- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix#6639: h264 hardware video decoding broken in 5.19 on Intel(R)
Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)
- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)
- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
