'struct amdgpu_bo_list' is really used as if it was ended by a flex array.
So make it more explicit and add a 'struct amdgpu_bo_list_entry entries[]'
field at the end of the structure.
This way, struct_size() can be used when it is allocated.
It is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace print_clock_levels with emit_clock_levels for arcturus
* replace .print_clk_levels with .emit_clk_levels in arcturus_ppt_funcs
* added extra parameter int *offset
* removed var size, uses arg *offset instead
* removed call to smu_cmn_get_sysfs_buf
* errors are returned to caller
* returns 0 on success
additional incidental changes
* changed type of var i, now to remove comparing mismatch types
* renamed var s/now/cur_value/
* switch statement default now returns -EINVAL
* RAS Recovery returns -EBUSY
Based on
commit b06b48d7dd ("amdgpu/pm: Implement emit_clk_levels for navi10")
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the smu firmware has fixed the issue that described in the commit 60d61f4ed6
("drm/amdgpu/pm: fix the Stable pstate Test in amdgpu_test").
So we only need keep dpm status check in the funciton - smu_v13_0_5_set_soft_freq_limited_range.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for older BIOS, smu won't fill average field of gpu_metrics_table, so we acquire
average_* from current field. but now average value is available in gpu_metrics_v2_4
Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The val is defined as unsigned int type, if(val<0) is invalid, hence
modified its type to ssize_t
Fixes the below:
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2800:5-8: WARNING: Unsigned expression compared with zero: val < 0
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2813:5-8: WARNING: Unsigned expression compared with zero: val < 0
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If mGPUs is on same IOMMU group, or is ram direct mapped, then mGPUs
can share the original BO for GTT mapping dma address, without creating
new BO from export/import dmabuf.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_mode1_reset will return gpu mode1_reset
succeed (ret = 0) as long as wait_for_bootloader call
succeed, regardless of the status reported by smu or
psp firmware. This results to driver continue executing
recovery even smu or psp fail to perform mode1 reset.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Ensure FS is enabled before sending request to DMUB for FS changes
- Add check for PMFW hard min request complete
- Save addr update in scratch before flip
- Fix static screen detection setting
- Write flip addr to scratch reg for subvp
- set minimum of VBlank_nom
- Correct unit conversion for vstartup
- Roll back unit correction
- Enable runtime register offset init for DCN32 DMUB
- Refactor edp power control
- PQ regamma end point
- PQ tail accuracy
- Expose mall capability
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ignore_msa_timing_param indicates FS is capable but not necessarily enabled
[How]
add check for either allow_freesync or vrr_active_variable to confirm FS is enabled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When we issue hard min request to PMFW, the ack back does not
guarantee the request has been fulfilled.
[How]
Add new PMFW message to check if the hard min request has been
completed. Returned bit mask indicates which clock requests are
completed. Check PMFW version before using message
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3,
but we still follow DCN2 to apply setting for
OTG_STATIC_SCREEN_EVENT_MASK.
[How]
Add new function to apply correct settings for DCN3 series.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: SungHuai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial implementation for mmhub 3.3.0.
v2: squash in client id fix (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize golden setting for gc_11_5_0.
v2: squash in latest golden updates (Alex)
v3: squash in checkpatch fix (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use 6.1.0 register offset and remove unused variable.
v2: clean up logic (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As made mention of in commit 4a2df0d1f2 ("drm/amd/display: Fixed
non-native modes not lighting up"), we shouldn't call
drm_mode_set_crtcinfo() once the crtc timings have been decided. Since,
it can cause settings to be unintentionally overwritten. So, since
dm_state is never NULL now, we can use old_stream to determine if we
should call drm_mode_set_crtcinfo() because we only need to set the crtc
timing parameters for entirely new streams.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Fixes: bd49f19039 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
Current SRIOV still using adev->clock.default_XX which gets from
atomfirmware. But these fields are abandoned in atomfirmware long ago.
Which may cause function to return a 0 value.
[How]
We don't need to check whether SR-IOV. For SR-IOV one-vf-mode,
pm is enabled and VF is able to read dpm clock
from pmfw, so we can use dpm clock interface directly. For
multi-VF mode, VF pm is disabled, so driver can just react as pm
disabled. One-vf-mode is introduced from GFX9 so it shall not have
any backward compatibility issue.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
SubVP needs to "calculate" the earliest in use META address
by using the current primary / meta addresses, but this leads
to a race condition where FW and driver can read/write the
address at the same time and intermittently produce inconsistent
address offsets. To mitigate this issue without locking (too slow),
save each surface flip addr into scratch registers and use this
to keep track of the earliest in use META addres.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
