Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
Cross-merge networking fixes after downstream PR (net-6.17-rc8).
Conflicts:
tools/testing/selftests/drivers/net/bonding/Makefile
87951b5664 selftests: bonding: add test for passive LACP mode
c2377f1763 selftests: bonding: add test for LACP actor port priority
Adjacent changes:
drivers/net/ethernet/cadence/macb.h
fca3dc859b net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf16 net: macb: Add TAPRIO traffic scheduling support
drivers/net/ethernet/cadence/macb_main.c
fca3dc859b net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf16 net: macb: Add TAPRIO traffic scheduling support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Allwinner A523 SoC family has a second Ethernet controller, called
the GMAC200 in the BSP and T527 datasheet, and referred to as GMAC1 for
numbering. This controller, according to BSP sources, is fully
compatible with a slightly newer version of the Synopsys DWMAC core.
The glue layer around the controller is the same as found around older
DWMAC cores on Allwinner SoCs. The only slight difference is that since
this is the second controller on the SoC, the register for the clock
delay controls is at a different offset. Last, the integration includes
a dedicated clock gate for the memory bus and the whole thing is put in
a separately controllable power domain.
Add a compatible string entry for it, and work in the requirements for
a second clock and a power domain.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250925191600.3306595-2-wens@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Apple SoC driver updates for 6.18
Krzysztof Kozlowski asked us to move away from generic compatibles:
- Adjust all dt-bindings to use apple,t8103-XXXX instead of apple,XXXX
as fallback and add a comment that the old generic list should no
longer be extended.
- Add new fallback compatibles to pinctrl, pmdomain, spi, and mca
drivers. These changes have been Acked by their subsystem maintainers
to be merged through our tree together with the dt-bindings.
Support for pre-M1 Apple Silicon:
- SART and mailbox gain support for Apple's A11, which are both
required for NVMe.
- NVMe also gains support for Apple's A11 and the nvme maintainers
prefer that we merge this through the soc tree together with
the mailbox and SART changes.
- SPMI compatibles for A11 and T2 have been added, also going through
the soc tree due to conflicts with the generic compatible removal and
because no driver change is required.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: (32 commits)
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
spi: apple: Add "apple,t8103-spi" compatible
ASoC: apple: mca: Add "apple,t8103-mca" compatible
pinctrl: apple: Add "apple,t8103-pinctrl" as compatible
spi: dt-bindings: apple,spi: Add t6020-spi compatible
ASoC: dt-bindings: apple,mca: Add t6020-mca compatible
dt-bindings: dma: apple,admac: Add t6020-admac compatible
dt-bindings: clock: apple,nco: Add t6020-nco compatible
dt-bindings: watchdog: apple,wdt: Add t6020-wdt compatible
dt-bindings: spmi: apple,spmi: Add t6020-spmi compatible
dt-bindings: mfd: apple,smc: Add t6020-smc compatible
dt-bindings: net: bcm4329-fmac: Add BCM4388 PCI compatible
dt-bindings: net: bcm4377-bluetooth: Add BCM4388 compatible
dt-bindings: nvme: apple: Add apple,t6020-nvme-ans2 compatible
dt-bindings: iommu: apple,sart: Add apple,t6020-sart compatible
dt-bindings: gpu: apple,agx: Add agx-{g14s,g14c,g14d} compatibles
dt-bindings: mailbox: apple,mailbox: Add t6020 compatible
dt-bindings: pinctrl: apple,pinctrl: Add apple,t6020-pinctrl compatible
dt-bindings: iommu: dart: Add apple,t6020-dart compatible
...
Link: https://lore.kernel.org/r/20250920123028.49973-1-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
At reset, KSZ8463 uses a strap-based configuration to set SPI as
interface bus. If the required pull-ups/pull-downs are missing (by
mistake or by design to save power) the pins may float and the
configuration can go wrong preventing any communication with the switch.
Add a 'reset' pinmux state
Add a KSZ8463 specific strap description that can be used by the driver
to drive the strap pins during reset. Two GPIOs are used. Users must
describe either both of them or none of them.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250918-ksz-strap-pins-v3-2-16662e881728@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add device tree binding support for RZ/T2H and RZ/N2H SoCs to the
existing RZ/N1 MIIC converter binding. These SoCs share similar MIIC
functionality but have architectural differences that require schema
updates.
Add new compatible strings "renesas,r9a09g077-miic" for RZ/T2H and
"renesas,r9a09g087-miic" for RZ/N2H, with the latter falling back to
the RZ/T2H variant. The new SoCs require reset support with two reset
lines for converter register reset and converter reset, which are not
present on RZ/N1.
Update port configurations to accommodate the different architectures.
RZ/N1 supports 5 ports numbered 1-5 with complex input mappings
covering indices 0-13, while RZ/T2H and RZ/N2H support 4 ports
numbered 0-3 with simplified input mappings covering indices 0-8.
Extend the switch port configuration property to support value 0 for
the new SoCs.
Add a new dt-bindings header file with media interface connection
matrix constants that map GMAC, ESC, and ETHSW ports to numeric
identifiers for use with RZ/T2H and RZ/N2H device trees.
Update DT schema validation to ensure proper port numbering and input
mappings per SoC variant.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250910204132.319975-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
STM32 DT for v6.18, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add missing Ethernet1/2 PTP reference clocks.
- Add Hardware debug port (HDP).
- STMP32MP15:
- Add resets property to m_can nodes.
- Add Hardware debug port (HDP) and enable it on stm32mp157c-dk2
board.
- Reserve leds for CM4 on stm32mp15xx-ed1 and stm32mp15xx-dkx.
- stm32mp151c-plyaqm:
Use correct dai-format property.
- STM32MP23:
- Add Ethernet1 MAC controller on stm32mp235f-dk board:
It is connected to a RTL8211F-CG phy through RGMII.
- Fix GPIO bank definition & memory size (DDR).
- STM32MP25:
- Add Ethernet1 MAC controller on stm32mp257f-dk board.
It is connected to a RTL8211F-CG phy through RGMII.
- Add Ethernet1 MAC controller on stm32mp257f-ev1 board.
It is connected to a RTL8211F-CG phy through RGMII.
- Add display support by enabling the following IPs on
stm32mp257f-ev1:
* LTDC
* LVDS
* WSVGA LVDS panel (1024x600)
* Panel LVDS backlight as GPIO backlight
* ILI2511 i2c touchscreen
- Add PCIe Root complex and Endpoint support on stm32mp257f-ev1.
Root complex mode is used by default.
* tag 'stm32-dt-for-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (30 commits)
arm64: dts: st: fix memory region size on stm32mp235f-dk
arm64: dts: st: remove gpioj and gpiok banks from stm32mp231
arm64: dts: st: enable ethernet1 controller on stm32mp235f-dk
arm64: dts: st: enable ethernet1 controller on stm32mp257f-ev1
arm64: dts: st: enable ethernet1 controller on stm32mp257f-dk
arm64: dts: st: add eth1 pins for stm32mp2x platforms
ARM: dts: stm32: add missing PTP reference clocks on stm32mp13x SoCs
arm64: dts: st: enable display support on stm32mp257f-ev1 board
arm64: dts: st: add clock-cells to syscfg node on stm32mp251
arm64: dts: st: add lvds support on stm32mp255
arm64: dts: st: add ltdc support on stm32mp255
arm64: dts: st: add ltdc support on stm32mp251
ARM: dts: stm32: add resets property to m_can nodes in the stm32mp153
dt-binding: can: m_can: add optional resets property
arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board
arm64: dts: st: Add PCIe Endpoint mode on stm32mp251
arm64: dts: st: Add PCIe Root Complex mode on stm32mp251
arm64: dts: st: add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: defconfig: Enable STMicroelectronics STM32 DMA3 support
ARM: dts: stm32: add Hardware debug port (HDP) on stm32mp157c-dk2 board
...
Link: https://lore.kernel.org/r/13153fc2-1abe-4d53-807a-5d289981a63d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BCM4388 WiFi/BT modules are found on Apple silicon devices using
M2 Pro/Max/Ultra and later. Driver support for this module is not
submitted yet.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Add device tree binding support for the Gigabit Ethernet MAC (GMAC) IP
on Renesas RZ/T2H and RZ/N2H SoCs. While these SoCs use the same
Synopsys DesignWare MAC version 5.20 as RZ/V2H, they are synthesized
with different hardware configurations.
Add new compatible strings "renesas,r9a09g077-gbeth" for RZ/T2H and
"renesas,r9a09g087-gbeth" for RZ/N2H, with the latter using RZ/T2H as
fallback since they share identical GMAC IP.
Update the schema to handle hardware differences between SoC variants.
RZ/T2H requires only 3 clocks compared to 7 on RZ/V2H, supports 8 RX/TX
queue pairs instead of 4, and needs 2 reset controls with reset-names
property versus a single unnamed reset. RZ/T2H also has the split header
feature enabled which is disabled on RZ/V2H.
Add support for an optional pcs-handle property to connect the GMAC to
the MIIC PCS converter on RZ/T2H. Use conditional schema validation to
enforce the correct clock, reset, and interrupt configurations per SoC
variant.
Extend the base snps,dwmac.yaml schema to accommodate the increased
interrupt count, supporting up to 19 interrupts and extending the
rx-queue and tx-queue interrupt name patterns to cover queues 0-7.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250908105901.3198975-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some Ethernet controllers, the PTP timer function is not integrated.
Instead, the PTP timer is a separate device and provides PTP Hardware
Clock (PHC) to the Ethernet controller to use, such as NXP FMan MAC,
ENETC, etc. Therefore, a property is needed to indicate this hardware
relationship between the Ethernet controller and the PTP timer.
Since this use case is also very common, it is better to add a generic
property to ethernet-controller.yaml. According to the existing binding
docs, there are two good candidates, one is the "ptp-timer" defined in
fsl,fman-dtsec.yaml, and the other is the "ptimer-handle" defined in
fsl,fman.yaml. From the perspective of the name, the former is more
straightforward, so move the "ptp-timer" from fsl,fman-dtsec.yaml to
ethernet-controller.yaml.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250829050615.1247468-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PPE (packet process engine) hardware block is available in Qualcomm
IPQ chipsets that support PPE architecture, such as IPQ9574. The PPE in
the IPQ9574 SoC includes six Ethernet ports (6 GMAC and 6 XGMAC), which
are used to connect with external PHY devices by PCS. It includes an L2
switch function for bridging packets among the 6 Ethernet ports and the
CPU port. The CPU port enables packet transfer between the Ethernet ports
and the ARM cores in the SoC, using the Ethernet DMA.
The PPE also includes packet processing offload capabilities for various
networking functions such as route and bridge flows, VLANs, different
tunnel protocols and VPN.
The PPE switch is modeled according to the Ethernet switch schema, with
additional properties defined for the switch node for interrupts, clocks,
resets, interconnects and Ethernet DMA. The switch port node is extended
with additional properties for clocks and resets.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://patch.msgid.link/20250818-qcom_ipq_ppe-v8-1-1d4ff641fce9@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RTL8211F PHY has two modes for a single INTB/PMEB pin:
1. INTB mode, where it signals interrupts to the CPU, which can
include wake-on-LAN events.
2. PMEB mode, where it only signals a wake-on-LAN event, which
may either be a latched logic low until software manually
clears the WoL state, or pulsed mode.
In the case of (1), there is no way to know whether the interrupt to
which the PHY is connected is capable of waking the system. In the
case of (2), there would be no interrupt property in the PHY's DT
description, and thus there is nothing to describe whether the pin is
even wired to anything such as a power management controller.
There is a "wakeup-source" property which can be applied to any device
- see Documentation/devicetree/bindings/power/wakeup-source.txt
Case 1 above matches example 2 in this document, and case 2 above
matches example 3. Therefore, it seems reasonable to make use of this
existing specification, albiet it hasn't been converted to YAML.
Document the wakeup-source property in the device description, which
will indicate that the PHY has been wired up in such a way that it
can wake the system from a low power state.
We will use this in a rewrite of the existing broken Wake-on-Lan code
that was merged during the 6.16 merge window to support case 1. Case 2
can be added to the driver later without needing to further alter the
DT description. To be clear, the existing Wake-on-Lan code that was
recently merged has multiple functional issues.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/E1um9Xj-008kBx-72@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc2).
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
d7a276a576 ("net: stmmac: rk: convert to suspend()/resume() methods")
de1e963ad0 ("net: stmmac: rk: put the PHY clock on remove")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document memory regions used by Airoha EN7581 NPU for wlan traffic
offloading. The brand new added memory regions do not introduce any
backward compatibility issues since they will be used just to offload
traffic to/from the MT76 wireless NIC and the MT76 probing will not fail
if these memory regions are not provide, it will just disable offloading
via the NPU module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-1-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Pull devicetree updates from Rob Herring:
- Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices
- Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
himax,hx8357d, and sitronix,st7586 bindings to DT schema format
- Fixes for some display bindings
- More indentation clean-ups in examples
- Add more guidelines and clarifications on writing bindings
* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
dt-bindings: Correct indentation and style in DTS example
dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
dt-bindings: interrupt-controller: Add fsl,icoll.yaml
dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
dt-bindings: timer: via,vt8500-timer: Convert to YAML
dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
dt-bindings: trivial-devices: Add undocumented hwmon devices
dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
docs: dt: writing-schema: Document preferred order of properties
docs: dt: writing-bindings: Document discouraged instance IDs
docs: dt: writing-bindings: Document compatible and filename naming
docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
docs: dt: writing-bindings: Consistently use single-whitespace
docs: dt: writing-bindings: Express better expectations of "specific"
...
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
