eb4513482d
(ARM: shmobile: Enable kzm9g board in multiplatform defconfig)
dropped CONFIG_REGULATOR from shmobile_defconfig as it was
generated using a tree where CONFIG_REGULATOR is indirectly
selected by ARCH_SH73A0.
ARCH_SH73A0 is not queued up for v3.20 and thus, baring unforeseen
changes, CONFIG_REGULATOR will not be selected by shmobile_defconfig
in that release. This causes at least SDHI to stop working on
R-Car Gen2 SoCs.
Reported-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms: minimal patch targeted as a fix]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
CONFIG_FHANDLE is required by systemd, which is the default init system
in more and more distributions. So lets enable it for Exynos as well
(it's already enabled in multi_v7_defconfig)
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, extcon, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, extcon, fuel gauge (max17042),
used on: Trats2,
This allows full usage of charging stack on these devices along with
extcon connector.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
On enabling CONFIG_LOCKUP_DETECTOR the kernel to act as a watchdog
to detect hard and soft lockups. Enabling CONFIG_LOCKUP_DETECTOR
don't introduce much overhead on exyons SOC.
(CONFIG_LOCKUP_DETECTOR is enabled on multi_v7_defconfig.)
Tested on Exynos5422 ODROID XU3 board.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Anand Moon <moon.linux@yahoo.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Merge "ARM: tegra: Default configuration changes for v3.20" from Thierry Reding:
This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.
* tag 'tegra-for-3.20-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Regenerate defconfig based on v3.19-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: imx: defconfig update for 3.20" from Shawn Guo:
The i.MX defconfig update for 3.20:
- Eneable FB_MXS, SPI_FSL_QUADSPI, POWER_RESET_SYSCON and module build
for a bunch of USB functions
* tag 'imx-defconfig-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable more USB functions
ARM: imx_v6_v7_defconfig: Select CONFIG_FB_MXS
ARM: imx_v6_v7_defconfig: Select SPI_FSL_QUADSPI by default
ARM: imx_v6_v7_defconfig: add POWER_RESET_SYSCON
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "omap defconfig changes for v3.20" from Tony Lindgren:
Defconfig changes for omap2plus_defconfig to make it more modular,
and to add few more drivers found on various boards.
* tag 'omap-for-v3.20/defconfig-modular' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform
ARM: omap2plus_defconfig: Enable pcf857x
ARM: omap2plus_defconfig: Add NOR flash support
ARM: omap2plus_defconfig: Enable support for davinci_emac
ARM: omap2plus_defconfig: enable TPS65218 power button
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v3.20" from
Simon Horman:
Second Round of Renesas ARM Based SoC Defconfig Updates for v3.20
* Enable kzm9g board in multiplatform defconfig
* tag 'renesas-defconfig2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable kzm9g board in multiplatform defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
All defconfigs touched by this patch already enable DEBUG_LL and by
default DEBUG_LL_UART_NONE will be selected. This causes no issues
today because due to some back compatibility magic we eventually need
to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250
is the right value for these platforms and should be set in the config
files.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable CONFIG_USB_EHCI_HCD and CONFIG_USB_OHCI_HCD to get USB supports
with omap2plus_defconfig.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
BeagleBoard-X15 has options such as rtc, fan that need to be functional
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
USB Ethernet function at host mode
USB Media function(webcam) at host mode
USB Audio function at host mode
USB Serial function at host mode
USB EHSET driver at host mode (for OTG & EH Certification test)
Several USB Gadget functions:
- Configfs
- NCM
- Zero (used for test)
- Gadgetfs
- Serial
Above functions are built as module.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
CONFIG_FB_MXS is the LCD driver for mx6solo-lite and mx6solox.
Enable it by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Merge "at91: defconfig for 3.20 #1" from Nicolas Ferre:
First batch of defconfig update for 3.20:
- we remove DEBUG_LL from sama5 defconfig as all SoC are not compatible
- enable ISI and selected sensors
* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
ARM: at91/config: sama5: Remove DEBUG_LL
Signed-off-by: Olof Johansson <olof@lixom.net>
We have pcf857x at least several boards. Let's enable it
as a loadable module.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some omaps have NOR flash as the rootfs but we're missing
physmap and physmap_of to properly support it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have this on at least 3517-evm and dm8168-evm. Let's
enable davinci_emac so those can be booted with NFSroot.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Merge "omap fixes against v3.19-rc1" from Tony Lindgren:
Fixes for omaps mostly to deal with dra7 timer issues
and hypervisor mode. The other fixes are minor fixes for
various boards. The summary of the fixes is:
- Fix real-time counter rate typos for some frequencies
- Fix counter frequency drift for am572x
- Fix booting of secondary CPU in HYP mode
- Fix n900 board name for legacy user space
- Fix cpufreq in omap2plus_defconfig after Kconfig change
- Fix dra7 qspi partitions
And also, let's re-enable smc91x on some n900 boards that
we have sitting in a few test boot systems after the boot
loader dependencies got fixed.
* tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
ARM: OMAP2+: Fix n900 board name for legacy user space
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
ARM: dra7xx: Fix counter frequency drift for AM572x errata i856
ARM: omap5/dra7xx: Fix frequency typos
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable i2c driver for efm32. The other two changes are just results from
oldconfig after commits
- 08b964ff3c (ARM: 8198/1: make kuser helpers depend on MMU)
- 8357041a69 (of: remove /proc/device-tree)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Hip01 platform support for multi_v7_defconfig.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "mvebu: defconfig for v3.20" from Andrew Lunn:
mvebu defconfig changes for v3.20
- enable CPUFREQ_DT in mvebu_v7_defconfig
* tag 'mvebu-defconfig-3.20' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable CPUFREQ_DT in mvebu_v7_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: mediatek: defconfig changes for v3.20" from Matthias Brugger:
Add mediatek uart to multi_v7_defconfig
* tag 'v3.20-next-defconfig' of https://github.com/mbgg/linux-mediatek:
ARM: Add mediatek SoC UART support in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
The sama5_defconfig can be used both on the sama5d3 and the sama5d4.
Enabling DEBUG_LL is an issue though, since it will by default use the kernel
addresses for the sama5d3 DBGU UART, that is located at a different address on
the sama5d4.
Remove this from the defconfig.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Merge "Renesas ARM Based SoC Lager Board Removal for v3.20" from Simon Horman:
"The serial port rename changes are not strictly related to lager board
removal from a feature point of view. But the lager portion of this change
depends on board removal to avoid a regression of booting using that code,
And thus it seems to make sense to put here. And it seems best to put the
koelsch and lager serial port rename changes in the same branch.
Likewise the removal of bootargs from lager DT depends on removing lager
board code to avoid a regression when using it and thus I have included
it in the same branch."
* Remove legacy r8a7790 SoC and its Lager board code
* Update serial port names on koelsch and lager boards
* Remove console bootargs parameter from lager DT
* tag 'renesas-lager-board-removal-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: lager dts: Drop console= bootargs parameter
ARM: shmobile: koelsch: Rename SCIF[01] serial ports to ttySC[01]
ARM: shmobile: lager: Rename SCIFA[01] serial ports to ttySC[01]
ARM: shmobile: r8a7790: Remove legacy code
ARM: shmobile: lager: Remove legacy board support
ARM: shmobile: lager-reference: DTS-only board support
Signed-off-by: Olof Johansson <olof@lixom.net>
multi_v7_defconfig has it as Y already, so build it in here, too, for
consistency, and therefore build in HWMON as well.
Signed-off-by: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Many Exynos devices have a display panel. Most of them just have
a simple panel while others have more complex configurations that
requires an embedded DisplayPort (eDP) to LVDS bridges.
This patch enables the following features to be built in the kernel
image to support both setups:
- Direct Rendering Manager (DRM)
- DRM bridge registration and lookup framework
- Parade ps8622/ps8625 eDP/LVDS bridge
- NXP ptn3460 eDP/LVDS bridge
- Exynos Fully Interactive Mobile Display controller (FIMD)
- Panel registration and lookup framework
- Simple panels
- Backlight & LCD device support
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch enables the picoPHY usb phy which is used by
the usb2 and usb3 host controllers when controlling usb2/1.1
devices. It is found in stih407 family SoC's from STMicroelectronics.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables the picoPHY usb phy which is used by
the usb2 and usb3 host controllers when controlling usb2/1.1
devices. It is found in stih407 family SoC's from STMicroelectronics.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Enable tps65218 power button driver by default as
a dynamically linked module so AM437x SK can report
power button presses.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
By converting a few drivers to modules because they
won't be needed during boot anyways, we can shave off
about 700KiB of text.
Note that while at that, and after discussions with Tony
Lindgren, a few extra drivers were either removed because
they weren't needed, or added because they're useful for
debugging/testing.
Below is output of size for pre and post vmlinux binaries:
text data bss dec hex filename
8514799 765532 8416064 17696395 10e068b vmlinux-post-patch
9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch enables TOUCHSCREEN_SUN4I and CPU_THERMAL to enable cpufreq
support with passive cpu cooling (thermal throttling) on sunxi by default.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch enables TOUCHSCREEN_SUN4I, CPUFREQ_DT, and CPU_THERMAL to
enable cpufreq support with passive cpu cooling (thermal throttling)
by default.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Removes the following entries from the default configuration:
- PM: enabled by default (via PM_SLEEP -> SUSPEND)
- RESOURCE_COUNTERS: removed
Signed-off-by: Thierry Reding <treding@nvidia.com>
CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf071969
("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'")
Use the renamed CONFIG_CPUFREQ_DT generic driver. It looks like with
v3.18-rc1, commit bbcf071969 and fdc509b15e came in via
different trees causing the resultant v3.18-rc1 to be non-functional for
cpufreq as default supported with omap2plus_defconfig.
Fixes: fdc509b15e ("ARM: omap2plus_defconfig: Add cpufreq to defconfig")
Cc: <stable@vger.kernel.org> # 3.18
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add POWER_RESET_SYSCON since Vybrid SoC's now make use of this
driver to provide software reset capabilities through the SRC
module.
Also regenerated using savedefconfig which removed the config
BACKLIGHT_LCD_SUPPORT which is now selected by default since
commit 9c8ee3c734 ("video: mx3fb: always enable
BACKLIGHT_LCD_SUPPORT").
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Currently we enable Exynos devices in the multi v7 defconfig, however, when
testing on my ODROID-U3, I noticed that USB was not working. Enabling this
option causes USB to work, which enables networking support as well since the
ODROID-U3 has networking on the USB bus.
[arnd] Support for odroid-u3 was added in 3.10, so it would be nice to
backport this fix at least that far.
Signed-off-by: Steev Klimaszewski <steev@gentoo.org>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
multi_v7_defconfig has it as Y already, so build it in here, too, for
consistency, and therefore build in HWMON as well.
Signed-off-by: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch enables the cpufreq-dt driver in mvebu_v7_defconfig, as it
is used on Armada XP platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
