Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for three new MediaTek PMICs: MT6316, MT6363
and MT6373 and their variants - used in board designs featuring the
MediaTek MT8196 Chromebook SoC, or the MT6991 Dimensity 9400 Smartphone
SoC.
In particular, MT6316 is a regulator, but the MT6363 and MT6373 PMICs
are multi-function devices, as they have and expose multiple sub-devices;
moreover, some of those also contain an interrupt controller, managing
internal IPs interrupts: for those, a chained interrupt handler is
registered, which parent is the SPMI controller itself.
This series adds support for all of the MT6316 regulator variants and
for MT6363, MT6373 SPMI PMICs and their interrupt controller.
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
Merge series from Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>:
This series contains patches to update rpmh-regulator driver and
dt-bindings for supporting the PMIC voltage regulators present on the
boards with Qualcomm's next gen compute SoC - Glymur.
Device tree changes aren't part of this series and will be posted
separately after the official announcement of the Glymur SoC.
Currently, CMD-DB names for RPMH regulators follow this format:
`^(smps|ldo|bob|vs)[a-n][1-9][0-9]?$`
Here, the `[a-n]` value is read from the `pmic-id` DT property,
which is unique to each PMIC present on the board.
Note that in this older CMD-DB name format the SPMI bus on which
a particular PMIC regulator exists was not apparent from its
CMD-DB name.
New targets like Glymur, where we have multiple SPMI buses,
overcome this limitation by following a new CMD-DB name format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
Here `[A-N]_E[0-3]` part will now be read from the `pmic-id` DT
prop and it includes the SPMI bus id `[0-3]` as well.
However, the PMIC ID part `[A-N]` of the CMD-DB name is now
unique only to the SPMI bus that the PMIC regulator is present
on. which means `L1B_E0` and `L1B_E1` are both possible CMD-DB
names for two different regulator LDOs present on two different
SPMI buses (bus id 0 and 1) on the same board.
Note that since the new `pmic-id` DT property is a combo of
PMIC ID and SPMI bus ID, so its still unique to each PMIC
present on the board.
Update the `pmic-id` property pattern information to reflect this
change in the driver handling to support this new CMD-DB naming
format while maintaining backward compatiblilty with old CMD-DB
naming format which is still supported for older/existing
targets.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-2-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6331-regulator"
comaptible.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding was never applied to anything because it misses the
compatible, hence any mistake in it got unnoticed.
Before adding the compatible to let it apply, fix the names and
the node names of various regulators.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6332-regulator"
compatible.
Fixes: e22943e32e regulator: ("Add bindings for MT6332 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge series from Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>:
This patchset adds support for the max77838 PMIC. It's used on the Galaxy
S7 lineup of phones, and provides regulators for the display.
The 5" and 7" Raspberry Pi 720x1280 Display 2 MCU is a bit more
complex than the original Display 1 ATTINY88 and the binding is
also a bit more demanding. Split the binding into separate file
and fill in required gpio-controller, #gpio-cells and #pwm-cells
which must be present for the V2 MCU. Include mention of the 5"
panel in the description of Display 2, as the 5" panel uses the
same MCU.
Fixes: 6d09c6e474 ("regulator: dt-bindings: rpi-panel: Add regulator for 7" Raspberry Pi 720x1280")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20250905191637.147141-1-marek.vasut+renesas@mailbox.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
Merge series from Joy Zou <joy.zou@nxp.com>:
Add binding document and driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
binding part
- change regulator node names into lowercase.
- add more description for nxp,i2c-crc-enable.
- remove the unnecessary nxp,dvs-run/standby-voltage property.
These changes come from review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add regulator-state-mem property for example.
driver part
- convert to use maple tree register cache.
- change of_match_ptr() name to lowercase since dt-binding changed.
- add more nxp,i2c-crc-enable description for commit message.
- remove the of_parse_cb and dvs from pf0900_regulators since the
unnecessary property nxp,dvs-run/standby-voltage removed.
- add set_suspend_enable/disable/voltage for the SW regulator_ops.
the run/standby voltage can be adjusted via the API which regulator
driver provides is recommended.
These changes come from binding review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add bitfield.h header due to build issue.
- correct the sw4 id.
- add PF0900 prefix for short macro define in order to avoid duplication.
- merge the same mask define in order to simplify code.
- Link to v2: https://lore.kernel.org/r/20250721-b4-pf09-v2-v2-0-e2c568548032@nxp.com
Changes in v2:
binding part
- modify the binding file name to match compatible string.
- add one space for dt_binding_check warning.
- remove unnecessary quotes from "VAON".
- remove the unnecessary empty line.
- move unevaluatedProperties after the $ref.
- move additionalProperties after regulator type.
- remove unnecessary regulator description
driver part
- modify the copyright comment block to C++ style.
- add reg_read/write for regmap_bus.
- remove original pf0900_pmic_read/write.
- remove many regulator operations.
- use regmap_read replace pf0900_pmic_read.
- use regmap_update_bits and regmap_write_bits replace pf0900_pmic_write.
- move the code from pf0900.h to pf0900-regulator.c and delete the header file.
- remove unmask status interrupts and add unmask regulator interrupts.
- remove many interrupts check warning print from irq_handler.
- add notifier for regulator event.
- remove unused macro define.
- add PF0900 prefix for IRQ macro define in order to avoid duplication.
- use GENMASK() and BIT() to replace mask marco define
- remove redundant enum pf0900_chip_type.
- remove redundant print info and comments.
- add dvs property present check because this property is optional.
- remove ret == -EINVAL check from sw_set_dvs() function.
- Link to v1: https://lore.kernel.org/imx/20250617102025.3455544-1-joy.zou@nxp.com/
---
Joy Zou (2):
dt-bindings: regulator: add PF0900 regulator yaml
regulator: pf0900: Add PMIC PF0900 support
.../devicetree/bindings/regulator/nxp,pf0900.yaml | 163 ++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pf0900-regulator.c | 975 +++++++++++++++++++++
4 files changed, 1147 insertions(+)
---
base-commit: 84b92a499e7eca54ba1df6f6c6e01766025943f1
change-id: 20250714-b4-pf09-v2-91cdee6d1272
Best regards,
--
Joy Zou <joy.zou@nxp.com>
The active-semi,act8945a binding is documented in multiple places. The
charger child node is documented in regulator/active-semi,act8945a.yaml
and power/supply/active-semi,act8945a-charger.yaml. An old text binding
is in mfd/act8945a.txt.
Update the regulator/active-semi,act8945a.yaml with the additional
descriptions and constraints from
power/supply/active-semi,act8945a-charger.yaml, and then remove it and
mfd/act8945a.txt.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250807214459.4173892-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
Document and add support for the regulators on PM7550 and PMR735B, which
can be paired with the Milos SoC.
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for the DVFSRC regulators found on the MediaTek
MT8196 Chromebook SoC and the (unrelated) MT6893 Dimensity 1200.
Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from
TXT to YAML format. This patch does not change any functionality;
the bindings remain the same.
The bindings have been split into two parts: the MFD binding and
a separate binding for the regulator node, to simplify the addition
of other models later (which have different regulators).
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-1-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Some of the regulators on the MT6357 PMIC currently reference the
fixed-regulator dt-binding, which enforces the presence of a
regulator-fixed compatible. However since all regulators on the MT6357
PMIC are handled by a single mt6357-regulator driver, probed through
MFD, the compatibles don't serve any purpose. In fact they cause
failures in the DT kselftest since they aren't probed by the fixed
regulator driver as would be expected. Furthermore this is the only
dt-binding in this family like this: mt6359-regulator and
mt6358-regulator don't require those compatibles.
Commit d77e89b7b0 ("arm64: dts: mediatek: mt6357: Drop regulator-fixed
compatibles") removed the compatibles from Devicetree, but missed
updating the binding, which still requires them, introducing dt-binding
errors. Remove the compatible requirement by referencing the plain
regulator dt-binding instead to fix the dt-binding errors.
Fixes: d77e89b7b0 ("arm64: dts: mediatek: mt6357: Drop regulator-fixed compatibles")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250514-mt6357-regulator-fixed-compatibles-removal-bindings-v1-1-2421e9cc6cc7@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
