This fixes DMCU initialization in APU GPU passthrough. The
DMCU needs the GPU physical address, not the CPU physical
address. This ends up working out on bare metal because
we always use the physical address, but doesn't work in
passthrough because the addresses are different.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under virtualization guest needs to receive notification from host to
perform reset in some cases. Add nv mailbox irq in soc21.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cheap monitors sometimes advertise YUV modes they don't really have
(HDMI specification mandates YUV support so even monitors without actual
support will often wrongfully advertise it) which results in YUV matches
and user forum complaints of a red tint to light colour display areas in
common desktop environments.
Moving the default RGB fall-back before YUV selection results in RGB
mode matching in most cases, reducing complaints.
Fixes: 6c3c719936 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
commit cd5297b085 ("drm/etnaviv: Use FOLL_FORCE for userptr")
documents that FOLL_FORCE | FOLL_WRITE was really only used for reliable
R/O pinning.
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In case of Gen12 video and compute engines, TLB_INV registers are masked -
to modify one bit, corresponding bit in upper half of the register must
be enabled, otherwise nothing happens.
CVE: CVE-2022-4139
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 7938d61591 ("drm/i915: Flush TLBs before releasing backing store")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
CHA_VSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (Default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
We should only set these bits when the polarity is negative.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com
Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.
Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.
v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.
v2: Move the added lines down so flush_submission() is not affected.
Fixes: f33a8a5160 ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f301a29f14)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work
with GuC") extended the API of intel_gt_retire_requests_timeout() with an
extra argument 'remaining_timeout', intended for passing back unconsumed
portion of requested timeout when 0 (success) is returned. However, when
request retirement happens to succeed despite an error returned by a call
to dma_fence_wait_timeout(), that error code (a negative value) is passed
back instead of remaining time. If we then pass that negative value
forward as requested timeout to intel_uc_wait_for_idle(), an explicit BUG
will be triggered.
If request retirement succeeds but an error code is passed back via
remaininig_timeout, we may have no clue on how much of the initial timeout
might have been left for spending it on waiting for GuC to become idle.
OTOH, since all pending requests have been successfully retired, that
error code has been already ignored by intel_gt_retire_requests_timeout(),
then we shouldn't fail.
Assume no more time has been left on error and pass 0 timeout value to
intel_uc_wait_for_idle() to give it a chance to return success if GuC is
already idle.
v3: Don't fail on any error passed back via remaining_timeout.
v2: Fix the issue on the caller side, not the provider.
Fixes: b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f235dbd5b7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When transitioning FRL / DP2 is not required, we will always request
DTBCLK = 0Mhz, but PMFW returns the min freq
- This causes us to make DTBCLK requests every time we call optimize
after transitioning from FRL to non-FRL
- If DTBCLK is not required, request the min instead (then we only need
to make 1 extra request at boot time)
- Also when programming PIPE_DTO_SRC_SEL, don't programming for DP
first, just programming once for the required selection (programming
DP on an HDMI connection then switching back causes corruption)
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tests need to tell if display is connected via USB4 DPIA link.
Currently this is only possible via analyzing dmesg logs.
[How]
Create a per-connector debugfs entry to report if the link is
tunneled via USB4 DPIA.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Output transfer function must be programmed per pipe as part of a front end
update when the plane changes, or output transfer function changes for a
given plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Need to subtract unused section of the viewport when calculating required space
in MALL for subvp instead of adding, to prevent over allocation.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When entering into a SubVP config that requires a minimal
transition we need to retain phantom pipes and also restore
the mall config
- This is because the min transition will remove phantom pipes
from the context (shallow copy) and not restore it's original
state
- This is just a workaround, and needs a proper fix
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- This is a workaround to avoid concurrency issues -- a fast update
creates a shallow copy of the dc current_state, and removes all
subvp/phantom related flags.
- We want to prevent the fast update thread from removing those
flags in case there's another thread running that requires
the info for proper programming
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane
configs")' introduced a change that set low clock values for DCN31 and
DCN32. As a result of these changes, DC started to spam the log with the
following warning:
------------[ cut here ]------------
WARNING: CPU: 8 PID: 1486 at
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58
dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
[..]
CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1
RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206
RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80
RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0
RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005
R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000
R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000
[..]
dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu]
dcn32_update_clocks+0x5d9/0x650 [amdgpu]
dcn20_prepare_bandwidth+0x49/0x100 [amdgpu]
dcn30_prepare_bandwidth+0x63/0x80 [amdgpu]
dc_commit_state_no_check+0x39d/0x13e0 [amdgpu]
dc_commit_streams+0x1f9/0x3b0 [amdgpu]
dc_commit_state+0x37/0x120 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1f/0x40
? down_trylock+0x2c/0x40
? vprintk_emit+0x186/0x2c0
? vprintk_default+0x1d/0x20
? vprintk+0x4e/0x60
We can easily trigger this issue by using a 4k@120 or a 2k@165 and
running some of the kms_atomic tests. This warning is triggered because
the per-pipe clock update is not happening; this commit fixes this issue
by ensuring that DPPCLK is updated when calculating the watermark and
dlg is invoked.
Fixes: 2641c7b780 ("drm/amd/display: use low clocks for no plane configs")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fix was intended for improving on coding style but in the process
uncovers a race condition, which explains why we are getting incorrect
length in DPIA AUX replies. Due to the call path of DPIA AUX going from
DC back to DM layer then again into DC and the added complexities on top
of current DC AUX implementation, a proper fix to rely on current dc_lock
to address the race condition is difficult without a major overhual
on how DPIA AUX is implemented.
[How]
- Add a mutex dpia_aux_lock to protect DPIA AUX transfers
- Remove DMUB_ASYNC_TO_SYNC_ACCESS_* codes and rely solely on
aux_return_code_type for error reporting and handling
- Separate SET_CONFIG from DPIA AUX transfer because they have quiet
different processing logic
- Remove unnecessary type casting to and from void * type
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
MALL SS allocation calculations should iterate over all pipes to determine the
the allocation size required for HW cursor.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
-Program output transfer function when required
-Fix arthmetic errror in MALL size caluclations for subvp
-DCC Meta pitch used for MALL allocation
-Debugfs entry to tell if connector is DPIA link
-Use largest vready_offset in pipe group
-Fixes race condition in DPIA Aux transfer
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Corruption can occur in LB if vready_offset is not large enough.
DML calculates vready_offset for each pipe, but we currently select the
top pipe's vready_offset, which is not necessarily enough for all pipes
in the group.
[HOW]
Wherever program_global_sync is currently called, iterate through the
entire pipe group and find the highest vready_offset.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: d8ade3526b ("drm/radeon: handle non-VGA class pci devices with ATRM")
Fixes: c61e277587 ("drm/radeon: split ATRM support out from the ATPX handler (v3)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logical operator '&&' will make
smu->ppt_funcs->set_gfx_power_up_by_imu segment fault when
smu->ppt_funcs is NULL.
Signed-off-by: Yu Songping <yusongping@huawei.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_get_xgmi_hive(), we should not call kfree() after
kobject_put() as the PUT will call kfree().
In amdgpu_device_ip_init(), we need to check the returned *hive*
which can be NULL before we dereference it.
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
