bigjoiner_pipes() doesn't consider that:
- RKL only has three pipes
- some pipes may be fused off
This means that intel_atomic_check_bigjoiner() won't reject
all configurations that would need a non-existent pipe.
Instead we just keep on rolling witout actually having
reserved the slave pipe we need.
It's possible that we don't outright explode anywhere due to
this since eg. for_each_intel_crtc_in_pipe_mask() will only
walk the crtcs we've registered even though the passed in
pipe_mask asks for more of them. But clearly the thing won't
do what is expected of it when the required pipes are not
present.
Fix the problem by consulting the device info pipe_mask already
in bigjoiner_pipes().
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118185201.10469-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
(cherry picked from commit f1c87a94a1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GT MCR code currently relies on uncore->lock to avoid race
conditions on the steering control register during MCR operations. The
*_fw() versions of MCR operations expect the caller to already hold
uncore->lock, while the non-fw variants manage the lock internally.
However the sole callsite of intel_gt_mcr_wait_for_reg_fw() does not
currently obtain the forcewake lock, allowing a potential race condition
(and triggering an assertion on lockdep builds). Furthermore, since
'wait for register value' requests may not return immediately, it is
undesirable to hold a fundamental lock like uncore->lock for the entire
wait and block all other MMIO for the duration; rather the lock is only
needed around the MCR read operations and can be released during the
delays.
Convert intel_gt_mcr_wait_for_reg_fw() to a non-fw variant that will
manage uncore->lock internally. This does have the side effect of
causing an unnecessary lookup in the forcewake table on each read
operation, but since the caller is still holding the relevant forcewake
domain, this will ultimately just incremenent the reference count and
won't actually cause any additional MMIO traffic.
In the future we plan to switch to a dedicated MCR lock to protect the
steering critical section rather than using the overloaded and
high-traffic uncore->lock; on MTL and beyond the new lock can be
implemented on top of the hardware-provided synchonization mechanism for
steering.
Fixes: 3068bec83e ("drm/i915/gt: Add intel_gt_mcr_wait_for_reg_fw()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117173358.1980230-1-matthew.d.roper@intel.com
(cherry picked from commit 192bb40f03)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- in device_resume, sriov configure interrupt should be in full access,
so release_full_gpu should be done after kfd_resume.
- remove the previous workaround solution for sriov.
Fixes: ec4927d463 ("drm/amdgpu: fix for suspend/resume sequence under sriov")
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
If the timing generator isnt running, it does not make sense to trigger
a sync on the corresponding OTG. Check this condition before starting.
Otherwise, this will cause error like:
*ERROR* GSL: Timeout on reset trigger!
Fixes: dc55b106ad ("drm/amd/display: Disable phantom OTG after enable for plane disable")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct GOP_VBIOS_CONTENT and refactor the
rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no functional binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If CONFIG_DRM_AMDGPU=y and CONFIG_DRM_AMD_DC is not set,
gcc complained about unused-function :
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1705:13: error: ‘amdgpu_discovery_set_sriov_display’ defined but not used [-Werror=unused-function]
static void amdgpu_discovery_set_sriov_display(struct amdgpu_device *adev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To fix this error, use CONFIG_DRM_AMD_DC to wrap
the definition of amdgpu_discovery_set_sriov_display().
Fixes: 25263da376 ("drm/amdgpu: rework SR-IOV virtual display handling")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
root cause that S2A need to use deduct offset flag.
after setting this flag, vcn0 doorbell value works.
so return it as before
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
-Add configuration 2 for ABM 2.3/2.4.
-Add margin for HUBP for SubVp + DRR.
-Fix no display after resume from WB/CB.
-Limit HW cursor size to be less than 64 x 64 bytes when the stream is >= 4K.
-Lower watermarks for enter/enter+exit latency.
-Update support types for DCN314 to include z8 only and z8_z10 only state.
-Add new value for soc bounding box and dummy pstate.
-Override fclk chang latency when calculating prefetch schedule for subvp with low uclk.
-Add check for DET fetch latency for dcn32.
-Add check if PSR enabled when entering MALL.
-Use base MALL allocation size calculations off vewport height.
-Add YCBCR2020 to CSC matrix.
-Implement DP-Tx portion to interact with DPIA.
-Add debug option for increasing phantom lines.
-Fix phantom plane/stream retain after fail validation.
-Fix display corruption with VSR enable.
-Set valid divider value for virtual and FRL/DP2.
-Add new num clk levels struct for max mclk index.
-Fix check for phantom BPP.
-Fix rotated cursor offset calculation.
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.
[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Brief corruption is observed on hotplug/unplug with certain display
configurations when VSR is enabled.
[How]
Work around the issue by avoiding 2to1 ODM when stream plane_count is 0.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When some of the IGT tests are executed in DCN31, it is possible to see
multiple occurrences of this warning:
WARNING: CPU: 9 PID: 3482 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dcn30/dcn30_dpp.c:154
dpp3_program_post_csc+0x196/0x220 [amdgpu]
[..]
PU: 9 PID: 3482 Comm: amd_hdr Tainted: G W 5.18.0+ #3
IP: 0010:dpp3_program_post_csc+0x196/0x220 [amdgpu]
[..]
all Trace:
<TASK>
dpp3_cnv_setup+0x5d9/0x5f0 [amdgpu]
? dcn20_blank_pixel_data+0x30a/0x330 [amdgpu]
dcn20_program_pipe+0x259/0xb40 [amdgpu]
? offset_to_id+0x1b0/0x1c0 [amdgpu]
dcn20_program_front_end_for_ctx+0x36a/0x450 [amdgpu]
commit_planes_for_stream+0x8eb/0x13e0 [amdgpu]
This commit fix the above issue by adding YCBCR2020 coefficients to the
DPP Color Space Converter (CSC) matrix.
Reviewed-by: Nawwar Ali <nawwar.ali@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When attempting to enter MALL SS when a PSR panel
is connected, we have to check that the PSR panel
has already entered PSR because the vsync interrupt
call is per display index (can be called for the
non-PSR panel first)
- Also don't override link settings when programming
phantom stream (main and phantom pipe share the same link)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Some configurations are constructed with very marginal DET buffers relative to
the worst possible time required to fetch a swath.
[HOW?]
Add a check to see that the DET buffer allocated for each pipe can hide the
latency for all pipes to fetch at least one swath.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Prefetch is not budgetting time for dummy pstate when using subvp and low uclk.
[HOW?]
Override fclk change latency to use dummy pstate latency when calculating
prefetch schedule for subvp configs with low uclk.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if we block Z9 based on crossover threshold it's possible to
allow for Z8.
[How]
There's support for this on DCN314, so update the support types to
include a z8 only and z8_z10 only state.
Update the decide_zstate_support function to allow for specifying
these modes based on the Z8 threshold.
DCN31 has z-state disabled, but still update the legacy code to
map z8_only = disallow and z10_z8_only = z10_only to keep the support
the same.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP, we cannot support HW cursor if it's
greater than 64 x 64 x 4 bytes in size
- However, on certain config changes (i.e. pixel format)
we can exit SubVP (then change to HW cursor) then re-enter
SubVP without changing back to SW cursor because there is
no SetCursorAttributes call
- To workaround this issue, limit the HW cursor size to be
less than 64 x 64 x 4 bytes whenever the stream is >= 4K
- Also ensure this W/A only affects DCN that supports SubVP
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in fix (Alex)
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add margin for HUBP "jitter" for SubVp + DRR case
- Also do a min transition even if MPO is added on a
non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which
is to lower the brightness curves in 80%-100% range compared to the
existing default config 0.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.
Fixes: 3f12acc8d6 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
