Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and support for more models added to the existing
qcom-wcn driver as well as some minor tweaks and fixes.
New drivers:
- add the power sequencing driver for PCIe M.2 connectors
Driver improvements:
- use device_get_match_data() where applicable
- add support for the WCN39xx family of models to pwrseq-qcom-wcn
Fixes:
- fix a locking issue in pwrseq core
- fix retval check in pwrseq-qcom-wcn"
* tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix error path for VDDIO handling
power: sequencing: fix missing state_lock in pwrseq_power_on() error path
power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key M connector
power: sequencing: qcom-wcn: add support for WCN39xx
regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx
power: sequencing: qcom-wcn: use device_get_match_data()
Merge series from André Draszik <andre.draszik@linaro.org>:
This series extends the existing S2MPG10 PMIC driver to add support for
the regulators, and adds new S2MPG11 core and regulator drivers.
The patches are kept together in one series, due to S2MPG11 and its
regulators being very similar to S2MPG10.
The Samsung S2MPG11 PMIC is a Power Management IC for mobile
applications with buck converters, various LDOs, power meters, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC and both are used on the
Google Pixel 6 and 6 Pro (oriole / raven).
A DT update for Oriole / Raven to enable these is required which I will
send out separately.
The S2MPG11 PMIC is a Power Management IC for mobile applications with
buck converters, various LDOs, power meters, NTC thermistor inputs, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC.
S2MPG11 has 12 buck, 1 buck-boost, and 15 LDO rails. Several of these
can either be controlled via software (register writes) or via external
signals, in particular by:
* one out of several input pins connected to a main processor's:
* GPIO pins
* other pins that are e.g. firmware- or power-domain-controlled
without explicit driver intervention
* a combination of input pins and register writes.
Control via input pins allows PMIC rails to be controlled by firmware,
e.g. during standby/suspend, or as part of power domain handling where
otherwise that would not be possible. Additionally toggling a pin is
faster than register writes, and it also allows the PMIC to ensure that
any necessary timing requirements between rails are respected
automatically if multiple rails are to be enabled or disabled quasi
simultaneously.
While external control via input pins appears to exist on other
versions of this PMIC, there is more flexibility in this version, in
particular there is a selection of input pins to choose from for each
rail (which must therefore be configured accordingly if in use),
whereas other versions don't have this flexibility.
Add documentation related to the regulator (buck & ldo) parts like
devicetree definitions, regulator naming patterns, and additional
properties.
Since S2MPG11 is typically used as the sub-PMIC together with an
S2MPG10 as the main-PMIC, the datasheet and the binding both suffix the
rails with an 's'.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-3-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The S2MPG10 PMIC is a Power Management IC for mobile applications with
buck converters, various LDOs, power meters, RTC, clock outputs, and
additional GPIO interfaces.
It has 10 buck and 31 LDO rails. Several of these can either be
controlled via software (register writes) or via external signals, in
particular by:
* one out of several input pins connected to a main processor's:
* GPIO pins
* other pins that are e.g. firmware- or power-domain-controlled
without explicit driver intervention
* a combination of input pins and register writes.
Control via input pins allows PMIC rails to be controlled by firmware,
e.g. during standby/suspend, or as part of power domain handling where
otherwise that would not be possible. Additionally toggling a pin is
faster than register writes, and it also allows the PMIC to ensure that
any necessary timing requirements between rails are respected
automatically if multiple rails are to be enabled or disabled quasi
simultaneously.
While external control via input pins appears to exist on other
versions of this PMIC, there is more flexibility in this version, in
particular there is a selection of input pins to choose from for each
rail (which must therefore be configured accordingly if in use),
whereas other versions don't have this flexibility.
Add documentation related to the regulator (buck & ldo) parts like
devicetree definitions, regulator naming patterns, and additional
properties.
S2MPG10 is typically used as the main-PMIC together with an S2MPG11
PMIC in a main/sub configuration, hence the datasheet and the binding
both suffix the rails with an 'm'.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-2-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Documentation/devicetree/bindings/regulator/regulator.yaml
already states in its description that regulator-suspend-microvolt
is deprecated, but the schema did not formally mark it as such.
Add the `deprecated: true` annotation to regulator-suspend-microvolt
so that this is enforced at the schema level.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260119-regulator-binding-v1-1-e55d33b4c3e3@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ROHM BD72720 is a new PMIC with 10 BUCk and 11 LDO regulators.
The BD72720 is designed to support using the BUCK10 as a supply for
the LDOs 1 to 4. When the BUCK10 is used for this, it can be set to a
LDON_HEAD mode. In this mode, the BUCK10 voltage can't be controlled by
software, but the voltage is adjusted by PMIC to match the LDO1 .. LDO4
voltages with a given offset. Offset can be 50mV .. 300mV and is
changeable at 50mV steps.
Add 'ldon-head-microvolt' property to denote a board which is designed
to utilize the LDON_HEAD mode.
All other properties are already existing.
Add dt-binding doc for ROHM BD72720 regulators to make it usable.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/81cb38d0ae1b3fa426e40d5b0a93f69a0f374657.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Andreas Kemnade <andreas@kemnade.info>:
Add a driver for the TPS65185 regulator which provides the
comparatively high voltages needed for electronic paper displays.
Datasheet for the TPS65185 is at https://www.ti.com/lit/gpn/tps65185
To simplify things, include the hwmon part directly which is only
one temperature sensor and there are no other functions besides regulators
in this chip.
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for three new MediaTek PMICs: MT6316, MT6363
and MT6373 and their variants - used in board designs featuring the
MediaTek MT8196 Chromebook SoC, or the MT6991 Dimensity 9400 Smartphone
SoC.
In particular, MT6316 is a regulator, but the MT6363 and MT6373 PMICs
are multi-function devices, as they have and expose multiple sub-devices;
moreover, some of those also contain an interrupt controller, managing
internal IPs interrupts: for those, a chained interrupt handler is
registered, which parent is the SPMI controller itself.
This series adds support for all of the MT6316 regulator variants and
for MT6363, MT6373 SPMI PMICs and their interrupt controller.
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
Merge series from Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>:
This series contains patches to update rpmh-regulator driver and
dt-bindings for supporting the PMIC voltage regulators present on the
boards with Qualcomm's next gen compute SoC - Glymur.
Device tree changes aren't part of this series and will be posted
separately after the official announcement of the Glymur SoC.
Currently, CMD-DB names for RPMH regulators follow this format:
`^(smps|ldo|bob|vs)[a-n][1-9][0-9]?$`
Here, the `[a-n]` value is read from the `pmic-id` DT property,
which is unique to each PMIC present on the board.
Note that in this older CMD-DB name format the SPMI bus on which
a particular PMIC regulator exists was not apparent from its
CMD-DB name.
New targets like Glymur, where we have multiple SPMI buses,
overcome this limitation by following a new CMD-DB name format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
Here `[A-N]_E[0-3]` part will now be read from the `pmic-id` DT
prop and it includes the SPMI bus id `[0-3]` as well.
However, the PMIC ID part `[A-N]` of the CMD-DB name is now
unique only to the SPMI bus that the PMIC regulator is present
on. which means `L1B_E0` and `L1B_E1` are both possible CMD-DB
names for two different regulator LDOs present on two different
SPMI buses (bus id 0 and 1) on the same board.
Note that since the new `pmic-id` DT property is a combo of
PMIC ID and SPMI bus ID, so its still unique to each PMIC
present on the board.
Update the `pmic-id` property pattern information to reflect this
change in the driver handling to support this new CMD-DB naming
format while maintaining backward compatiblilty with old CMD-DB
naming format which is still supported for older/existing
targets.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-2-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6331-regulator"
comaptible.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding was never applied to anything because it misses the
compatible, hence any mistake in it got unnoticed.
Before adding the compatible to let it apply, fix the names and
the node names of various regulators.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6332-regulator"
compatible.
Fixes: e22943e32e regulator: ("Add bindings for MT6332 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge series from Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>:
This patchset adds support for the max77838 PMIC. It's used on the Galaxy
S7 lineup of phones, and provides regulators for the display.
The 5" and 7" Raspberry Pi 720x1280 Display 2 MCU is a bit more
complex than the original Display 1 ATTINY88 and the binding is
also a bit more demanding. Split the binding into separate file
and fill in required gpio-controller, #gpio-cells and #pwm-cells
which must be present for the V2 MCU. Include mention of the 5"
panel in the description of Display 2, as the 5" panel uses the
same MCU.
Fixes: 6d09c6e474 ("regulator: dt-bindings: rpi-panel: Add regulator for 7" Raspberry Pi 720x1280")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20250905191637.147141-1-marek.vasut+renesas@mailbox.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
Merge series from Joy Zou <joy.zou@nxp.com>:
Add binding document and driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
binding part
- change regulator node names into lowercase.
- add more description for nxp,i2c-crc-enable.
- remove the unnecessary nxp,dvs-run/standby-voltage property.
These changes come from review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add regulator-state-mem property for example.
driver part
- convert to use maple tree register cache.
- change of_match_ptr() name to lowercase since dt-binding changed.
- add more nxp,i2c-crc-enable description for commit message.
- remove the of_parse_cb and dvs from pf0900_regulators since the
unnecessary property nxp,dvs-run/standby-voltage removed.
- add set_suspend_enable/disable/voltage for the SW regulator_ops.
the run/standby voltage can be adjusted via the API which regulator
driver provides is recommended.
These changes come from binding review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add bitfield.h header due to build issue.
- correct the sw4 id.
- add PF0900 prefix for short macro define in order to avoid duplication.
- merge the same mask define in order to simplify code.
- Link to v2: https://lore.kernel.org/r/20250721-b4-pf09-v2-v2-0-e2c568548032@nxp.com
Changes in v2:
binding part
- modify the binding file name to match compatible string.
- add one space for dt_binding_check warning.
- remove unnecessary quotes from "VAON".
- remove the unnecessary empty line.
- move unevaluatedProperties after the $ref.
- move additionalProperties after regulator type.
- remove unnecessary regulator description
driver part
- modify the copyright comment block to C++ style.
- add reg_read/write for regmap_bus.
- remove original pf0900_pmic_read/write.
- remove many regulator operations.
- use regmap_read replace pf0900_pmic_read.
- use regmap_update_bits and regmap_write_bits replace pf0900_pmic_write.
- move the code from pf0900.h to pf0900-regulator.c and delete the header file.
- remove unmask status interrupts and add unmask regulator interrupts.
- remove many interrupts check warning print from irq_handler.
- add notifier for regulator event.
- remove unused macro define.
- add PF0900 prefix for IRQ macro define in order to avoid duplication.
- use GENMASK() and BIT() to replace mask marco define
- remove redundant enum pf0900_chip_type.
- remove redundant print info and comments.
- add dvs property present check because this property is optional.
- remove ret == -EINVAL check from sw_set_dvs() function.
- Link to v1: https://lore.kernel.org/imx/20250617102025.3455544-1-joy.zou@nxp.com/
---
Joy Zou (2):
dt-bindings: regulator: add PF0900 regulator yaml
regulator: pf0900: Add PMIC PF0900 support
.../devicetree/bindings/regulator/nxp,pf0900.yaml | 163 ++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pf0900-regulator.c | 975 +++++++++++++++++++++
4 files changed, 1147 insertions(+)
---
base-commit: 84b92a499e7eca54ba1df6f6c6e01766025943f1
change-id: 20250714-b4-pf09-v2-91cdee6d1272
Best regards,
--
Joy Zou <joy.zou@nxp.com>
The active-semi,act8945a binding is documented in multiple places. The
charger child node is documented in regulator/active-semi,act8945a.yaml
and power/supply/active-semi,act8945a-charger.yaml. An old text binding
is in mfd/act8945a.txt.
Update the regulator/active-semi,act8945a.yaml with the additional
descriptions and constraints from
power/supply/active-semi,act8945a-charger.yaml, and then remove it and
mfd/act8945a.txt.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250807214459.4173892-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
Document and add support for the regulators on PM7550 and PMR735B, which
can be paired with the Milos SoC.
