Files
linux/crypto/Makefile
Linus Torvalds 91a4855d6c Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support HW queue leasing, allowing containers to be granted access
     to HW queues for zero-copy operations and AF_XDP

   - Number of code moves to help the compiler with inlining. Avoid
     output arguments for returning drop reason where possible

   - Rework drop handling within qdiscs to include more metadata about
     the reason and dropping qdisc in the tracepoints

   - Remove the rtnl_lock use from IP Multicast Routing

   - Pack size information into the Rx Flow Steering table pointer
     itself. This allows making the table itself a flat array of u32s,
     thus making the table allocation size a power of two

   - Report TCP delayed ack timer information via socket diag

   - Add ip_local_port_step_width sysctl to allow distributing the
     randomly selected ports more evenly throughout the allowed space

   - Add support for per-route tunsrc in IPv6 segment routing

   - Start work of switching sockopt handling to iov_iter

   - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
     buffer size drifting up

   - Support MSG_EOR in MPTCP

   - Add stp_mode attribute to the bridge driver for STP mode selection.
     This addresses concerns about call_usermodehelper() usage

   - Remove UDP-Lite support (as announced in 2023)

   - Remove support for building IPv6 as a module. Remove the now
     unnecessary function calling indirection

  Cross-tree stuff:

   - Move Michael MIC code from generic crypto into wireless, it's
     considered insecure but some WiFi networks still need it

  Netfilter:

   - Switch nft_fib_ipv6 module to no longer need temporary dst_entry
     object allocations by using fib6_lookup() + RCU.

     Florian W reports this gets us ~13% higher packet rate

   - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
     switch the service tables to be per-net. Convert some code that
     walks the service lists to use RCU instead of the service_mutex

   - Add more opinionated input validation to lower security exposure

   - Make IPVS hash tables to be per-netns and resizable

  Wireless:

   - Finished assoc frame encryption/EPPKE/802.1X-over-auth

   - Radar detection improvements

   - Add 6 GHz incumbent signal detection APIs

   - Multi-link support for FILS, probe response templates and client
     probing

   - New APIs and mac80211 support for NAN (Neighbor Aware Networking,
     aka Wi-Fi Aware) so less work must be in firmware

  Driver API:

   - Add numerical ID for devlink instances (to avoid having to create
     fake bus/device pairs just to have an ID). Support shared devlink
     instances which span multiple PFs

   - Add standard counters for reporting pause storm events (implement
     in mlx5 and fbnic)

   - Add configuration API for completion writeback buffering (implement
     in mana)

   - Support driver-initiated change of RSS context sizes

   - Support DPLL monitoring input frequency (implement in zl3073x)

   - Support per-port resources in devlink (implement in mlx5)

  Misc:

   - Expand the YAML spec for Netfilter

  Drivers

   - Software:
      - macvlan: support multicast rx for bridge ports with shared
        source MAC address
      - team: decouple receive and transmit enablement for IEEE 802.3ad
        LACP "independent control"

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - support high order pages in zero-copy mode (for payload
           coalescing)
         - support multiple packets in a page (for systems with 64kB
           pages)
      - Broadcom 25-400GE (bnxt):
         - implement XDP RSS hash metadata extraction
         - add software fallback for UDP GSO, lowering the IOMMU cost
      - Broadcom 800GE (bnge):
         - add link status and configuration handling
         - add various HW and SW statistics
      - Marvell/Cavium:
         - NPC HW block support for cn20k
      - Huawei (hinic3):
         - add mailbox / control queue
         - add rx VLAN offload
         - add driver info and link management

   - Ethernet NICs:
      - Marvell/Aquantia:
         - support reading SFP module info on some AQC100 cards
      - Realtek PCI (r8169):
         - add support for RTL8125cp
      - Realtek USB (r8152):
         - support for the RTL8157 5Gbit chip
         - add 2500baseT EEE status/configuration support

   - Ethernet NICs embedded and off-the-shelf IP:
      - Synopsys (stmmac):
         - cleanup and reorganize SerDes handling and PCS support
         - cleanup descriptor handling and per-platform data
         - cleanup and consolidate MDIO defines and handling
         - shrink driver memory use for internal structures
         - improve Tx IRQ coalescing
         - improve TCP segmentation handling
         - add support for Spacemit K3
      - Cadence (macb):
         - support PHYs that have inband autoneg disabled with GEM
         - support IEEE 802.3az EEE
         - rework usrio capabilities and handling
      - AMD (xgbe):
         - improve power management for S0i3
         - improve TX resilience for link-down handling

   - Virtual:
      - Google cloud vNIC:
         - support larger ring sizes in DQO-QPL mode
         - improve HW-GRO handling
         - support UDP GSO for DQO format
      - PCIe NTB:
         - support queue count configuration

   - Ethernet PHYs:
      - automatically disable PHY autonomous EEE if MAC is in charge
      - Broadcom:
         - add BCM84891/BCM84892 support
      - Micrel:
         - support for LAN9645X internal PHY
      - Realtek:
         - add RTL8224 pair order support
         - support PHY LEDs on RTL8211F-VD
         - support spread spectrum clocking (SSC)
      - Maxlinear:
         - add PHY-level statistics via ethtool

   - Ethernet switches:
      - Maxlinear (mxl862xx):
         - support for bridge offloading
         - support for VLANs
         - support driver statistics

   - Bluetooth:
      - large number of fixes and new device IDs
      - Mediatek:
         - support MT6639 (MT7927)
         - support MT7902 SDIO

   - WiFi:
      - Intel (iwlwifi):
         - UNII-9 and continuing UHR work
      - MediaTek (mt76):
         - mt7996/mt7925 MLO fixes/improvements
         - mt7996 NPU support (HW eth/wifi traffic offload)
      - Qualcomm (ath12k):
         - monitor mode support on IPQ5332
         - basic hwmon temperature reporting
         - support IPQ5424
      - Realtek:
         - add USB RX aggregation to improve performance
         - add USB TX flow control by tracking in-flight URBs

   - Cellular:
      - IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
  net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
  wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
  wireguard: allowedips: remove redundant space
  tools: ynl: add sample for wireguard
  wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
  MAINTAINERS: Add netkit selftest files
  selftests/net: Add additional test coverage in nk_qlease
  selftests/net: Split netdevsim tests from HW tests in nk_qlease
  tools/ynl: Make YnlFamily closeable as a context manager
  net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
  net: airoha: Fix VIP configuration for AN7583 SoC
  net: caif: clear client service pointer on teardown
  net: strparser: fix skb_head leak in strp_abort_strp()
  net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
  selftests/bpf: add test for xdp_master_redirect with bond not up
  net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
  net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
  sctp: disable BH before calling udp_tunnel_xmit_skb()
  sctp: fix missing encap_port propagation for GSO fragments
  net: airoha: Rely on net_device pointer in ETS callbacks
  ...
2026-04-14 18:36:10 -07:00

210 lines
7.4 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Cryptographic API
#
CONTEXT_ANALYSIS := y
obj-$(CONFIG_CRYPTO) += crypto.o
crypto-y := api.o cipher.o
obj-$(CONFIG_CRYPTO_ENGINE) += crypto_engine.o
obj-$(CONFIG_CRYPTO_FIPS) += fips.o
crypto_algapi-$(CONFIG_PROC_FS) += proc.o
crypto_algapi-y := algapi.o scatterwalk.o $(crypto_algapi-y)
obj-$(CONFIG_CRYPTO_ALGAPI2) += crypto_algapi.o
obj-$(CONFIG_CRYPTO_AEAD2) += aead.o
obj-$(CONFIG_CRYPTO_GENIV) += geniv.o
crypto_skcipher-y += lskcipher.o
crypto_skcipher-y += skcipher.o
obj-$(CONFIG_CRYPTO_SKCIPHER2) += crypto_skcipher.o
ifeq ($(CONFIG_BPF_SYSCALL),y)
obj-$(CONFIG_CRYPTO_SKCIPHER2) += bpf_crypto_skcipher.o
endif
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
obj-$(CONFIG_CRYPTO_ECHAINIV) += echainiv.o
crypto_hash-y += ahash.o
crypto_hash-y += shash.o
obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
obj-$(CONFIG_CRYPTO_AKCIPHER2) += akcipher.o
obj-$(CONFIG_CRYPTO_SIG2) += sig.o
obj-$(CONFIG_CRYPTO_KPP2) += kpp.o
dh_generic-y := dh.o
dh_generic-y += dh_helper.o
obj-$(CONFIG_CRYPTO_DH) += dh_generic.o
$(obj)/rsapubkey.asn1.o: $(obj)/rsapubkey.asn1.c $(obj)/rsapubkey.asn1.h
$(obj)/rsaprivkey.asn1.o: $(obj)/rsaprivkey.asn1.c $(obj)/rsaprivkey.asn1.h
$(obj)/rsa_helper.o: $(obj)/rsapubkey.asn1.h $(obj)/rsaprivkey.asn1.h
rsa_generic-y := rsapubkey.asn1.o
rsa_generic-y += rsaprivkey.asn1.o
rsa_generic-y += rsa.o
rsa_generic-y += rsa_helper.o
rsa_generic-y += rsa-pkcs1pad.o
rsa_generic-y += rsassa-pkcs1.o
obj-$(CONFIG_CRYPTO_RSA) += rsa_generic.o
$(obj)/ecdsasignature.asn1.o: $(obj)/ecdsasignature.asn1.c $(obj)/ecdsasignature.asn1.h
$(obj)/ecdsa-x962.o: $(obj)/ecdsasignature.asn1.h
ecdsa_generic-y += ecdsa.o
ecdsa_generic-y += ecdsa-x962.o
ecdsa_generic-y += ecdsa-p1363.o
ecdsa_generic-y += ecdsasignature.asn1.o
obj-$(CONFIG_CRYPTO_ECDSA) += ecdsa_generic.o
obj-$(CONFIG_CRYPTO_MLDSA) += mldsa.o
crypto_acompress-y := acompress.o
crypto_acompress-y += scompress.o
obj-$(CONFIG_CRYPTO_ACOMP2) += crypto_acompress.o
cryptomgr-y := algboss.o testmgr.o
obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
obj-$(CONFIG_CRYPTO_USER) += crypto_user.o
obj-$(CONFIG_CRYPTO_CMAC) += cmac.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
obj-$(CONFIG_CRYPTO_MD4) += md4.o
obj-$(CONFIG_CRYPTO_MD5) += md5.o
obj-$(CONFIG_CRYPTO_RMD160) += rmd160.o
obj-$(CONFIG_CRYPTO_SHA1) += sha1.o
obj-$(CONFIG_CRYPTO_SHA256) += sha256.o
obj-$(CONFIG_CRYPTO_SHA512) += sha512.o
obj-$(CONFIG_CRYPTO_SHA3) += sha3.o
obj-$(CONFIG_CRYPTO_SM3) += sm3.o
obj-$(CONFIG_CRYPTO_STREEBOG) += streebog_generic.o
obj-$(CONFIG_CRYPTO_WP512) += wp512.o
CFLAGS_wp512.o := $(call cc-option,-fno-schedule-insns) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
obj-$(CONFIG_CRYPTO_BLAKE2B) += blake2b.o
obj-$(CONFIG_CRYPTO_ECB) += ecb.o
obj-$(CONFIG_CRYPTO_CBC) += cbc.o
obj-$(CONFIG_CRYPTO_PCBC) += pcbc.o
obj-$(CONFIG_CRYPTO_CTS) += cts.o
obj-$(CONFIG_CRYPTO_LRW) += lrw.o
obj-$(CONFIG_CRYPTO_XTS) += xts.o
obj-$(CONFIG_CRYPTO_CTR) += ctr.o
obj-$(CONFIG_CRYPTO_XCTR) += xctr.o
obj-$(CONFIG_CRYPTO_HCTR2) += hctr2.o
obj-$(CONFIG_CRYPTO_ADIANTUM) += adiantum.o
obj-$(CONFIG_CRYPTO_GCM) += gcm.o
obj-$(CONFIG_CRYPTO_CCM) += ccm.o
obj-$(CONFIG_CRYPTO_CHACHA20POLY1305) += chacha20poly1305.o
obj-$(CONFIG_CRYPTO_AEGIS128) += aegis128.o
aegis128-y := aegis128-core.o
ifeq ($(ARCH),arm)
CFLAGS_aegis128-neon-inner.o += -ffreestanding -march=armv8-a -mfloat-abi=softfp
CFLAGS_aegis128-neon-inner.o += -mfpu=crypto-neon-fp-armv8
aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o
endif
ifeq ($(ARCH),arm64)
aegis128-cflags-y := -ffreestanding -mcpu=generic+crypto
aegis128-cflags-$(CONFIG_CC_IS_GCC) += -ffixed-q16 -ffixed-q17 -ffixed-q18 \
-ffixed-q19 -ffixed-q20 -ffixed-q21 \
-ffixed-q22 -ffixed-q23 -ffixed-q24 \
-ffixed-q25 -ffixed-q26 -ffixed-q27 \
-ffixed-q28 -ffixed-q29 -ffixed-q30 \
-ffixed-q31
CFLAGS_aegis128-neon-inner.o += $(aegis128-cflags-y)
CFLAGS_REMOVE_aegis128-neon-inner.o += -mgeneral-regs-only
aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o
endif
# Enable <arm_neon.h>
CFLAGS_aegis128-neon-inner.o += -isystem $(shell $(CC) -print-file-name=include)
obj-$(CONFIG_CRYPTO_PCRYPT) += pcrypt.o
obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o
obj-$(CONFIG_CRYPTO_DES) += des_generic.o
obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o
obj-$(CONFIG_CRYPTO_BLOWFISH) += blowfish_generic.o
obj-$(CONFIG_CRYPTO_BLOWFISH_COMMON) += blowfish_common.o
obj-$(CONFIG_CRYPTO_TWOFISH) += twofish_generic.o
obj-$(CONFIG_CRYPTO_TWOFISH_COMMON) += twofish_common.o
obj-$(CONFIG_CRYPTO_SERPENT) += serpent_generic.o
CFLAGS_serpent_generic.o := $(call cc-option,-fsched-pressure) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
obj-$(CONFIG_CRYPTO_AES) += aes.o
obj-$(CONFIG_CRYPTO_SM4) += sm4.o
obj-$(CONFIG_CRYPTO_SM4_GENERIC) += sm4_generic.o
obj-$(CONFIG_CRYPTO_CAMELLIA) += camellia_generic.o
obj-$(CONFIG_CRYPTO_CAST_COMMON) += cast_common.o
obj-$(CONFIG_CRYPTO_CAST5) += cast5_generic.o
obj-$(CONFIG_CRYPTO_CAST6) += cast6_generic.o
obj-$(CONFIG_CRYPTO_ARC4) += arc4.o
obj-$(CONFIG_CRYPTO_TEA) += tea.o
obj-$(CONFIG_CRYPTO_KHAZAD) += khazad.o
obj-$(CONFIG_CRYPTO_ANUBIS) += anubis.o
obj-$(CONFIG_CRYPTO_SEED) += seed.o
obj-$(CONFIG_CRYPTO_ARIA) += aria_generic.o
obj-$(CONFIG_CRYPTO_CHACHA20) += chacha.o
CFLAGS_chacha.o += -DARCH=$(ARCH)
obj-$(CONFIG_CRYPTO_DEFLATE) += deflate.o
obj-$(CONFIG_CRYPTO_CRC32C) += crc32c-cryptoapi.o
crc32c-cryptoapi-y := crc32c.o
obj-$(CONFIG_CRYPTO_CRC32) += crc32-cryptoapi.o
crc32-cryptoapi-y := crc32.o
obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
obj-$(CONFIG_CRYPTO_KRB5ENC) += krb5enc.o
obj-$(CONFIG_CRYPTO_LZO) += lzo.o lzo-rle.o
obj-$(CONFIG_CRYPTO_LZ4) += lz4.o
obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o
obj-$(CONFIG_CRYPTO_XXHASH) += xxhash_generic.o
obj-$(CONFIG_CRYPTO_842) += 842.o
obj-$(CONFIG_CRYPTO_RNG2) += rng.o
obj-$(CONFIG_CRYPTO_DRBG) += drbg.o
obj-$(CONFIG_CRYPTO_JITTERENTROPY) += jitterentropy_rng.o
CFLAGS_jitterentropy.o = -O0
KASAN_SANITIZE_jitterentropy.o = n
UBSAN_SANITIZE_jitterentropy.o = n
jitterentropy_rng-y := jitterentropy.o jitterentropy-kcapi.o
obj-$(CONFIG_CRYPTO_JITTERENTROPY_TESTINTERFACE) += jitterentropy-testing.o
obj-$(CONFIG_CRYPTO_BENCHMARK) += tcrypt.o
obj-$(CONFIG_CRYPTO_USER_API) += af_alg.o
obj-$(CONFIG_CRYPTO_USER_API_HASH) += algif_hash.o
obj-$(CONFIG_CRYPTO_USER_API_SKCIPHER) += algif_skcipher.o
obj-$(CONFIG_CRYPTO_USER_API_RNG) += algif_rng.o
obj-$(CONFIG_CRYPTO_USER_API_AEAD) += algif_aead.o
obj-$(CONFIG_CRYPTO_ZSTD) += zstd.o
obj-$(CONFIG_CRYPTO_ECC) += ecc.o
obj-$(CONFIG_CRYPTO_ESSIV) += essiv.o
ecdh_generic-y += ecdh.o
ecdh_generic-y += ecdh_helper.o
obj-$(CONFIG_CRYPTO_ECDH) += ecdh_generic.o
$(obj)/ecrdsa_params.asn1.o: $(obj)/ecrdsa_params.asn1.c $(obj)/ecrdsa_params.asn1.h
$(obj)/ecrdsa_pub_key.asn1.o: $(obj)/ecrdsa_pub_key.asn1.c $(obj)/ecrdsa_pub_key.asn1.h
$(obj)/ecrdsa.o: $(obj)/ecrdsa_params.asn1.h $(obj)/ecrdsa_pub_key.asn1.h
ecrdsa_generic-y += ecrdsa.o
ecrdsa_generic-y += ecrdsa_params.asn1.o
ecrdsa_generic-y += ecrdsa_pub_key.asn1.o
obj-$(CONFIG_CRYPTO_ECRDSA) += ecrdsa_generic.o
#
# generic algorithms and the async_tx api
#
obj-$(CONFIG_XOR_BLOCKS) += xor.o
obj-$(CONFIG_ASYNC_CORE) += async_tx/
obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/
crypto_simd-y := simd.o
obj-$(CONFIG_CRYPTO_SIMD) += crypto_simd.o
#
# Key derivation function
#
obj-$(CONFIG_CRYPTO_KDF800108_CTR) += kdf_sp800108.o
obj-$(CONFIG_CRYPTO_DF80090A) += df_sp80090a.o
obj-$(CONFIG_CRYPTO_KRB5) += krb5/