Due to some old SoCs with shared t-phy between usb3 and pcie only support
force-mode switch, and shared and non-shared t-phy may exist at the same
time on a SoC, can't use compatible to distinguish between shared and
non-shared t-phy, add a property to supported it.
Currently, only support switch from default pcie mode to usb3 mode.
But now prefer to use "mediatek,syscon-type" on new SoC as far as possible.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231211025624.28991-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
mvebu dt64 for 6.8 (part 1)
Add devices tree for CN9130 and CN9131 COM Express Boards
Fix device tree for Turris Mox and for switch nodes
* tag 'mvebu-dt64-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: cn913x: add device trees for COM Express boards
dt-bindings: arm64: add Marvell COM Express boards
MAINTAINERS: add ac5 to list of maintained Marvell dts files
arm64: dts: armada-3720-turris-mox: set irq type for RTC
ARM64: dts: Add special compatibles for the Turris Mox
ARM64: dts: marvell: Fix some common switch mistakes
Link: https://lore.kernel.org/r/87le9obypx.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.8, part two
1. Tesla FSD: Add Multi Format Codec (MFC) device nodes, for accelerated
video de/encoding.
2. Add initial Google Tensor GS101 SoC support. The GS101 SoC can be
found on Google Pixel 6 phones. Currently the DTS brings only basic
support: core clock controllers, pin controllers, serial, watchdog
and ARM core blocks.
* tag 'samsung-dt64-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT
MAINTAINERS: add entry for Google Tensor SoC
arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
arm64: dts: exynos: google: Add initial Google gs101 SoC support
dt-bindings: arm: google: Add bindings for Google ARM platforms
arm64: dts: fsd: Add MFC related DT enteries
Link: https://lore.kernel.org/r/20231220084722.22149-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: ZynqMP DT changes for 6.8
- Fix overlay rules to remove KR260 targets
- Move ethernet phys to mdio node
- Fix couple of issues reported by W=1
- Do not use _ in node names
- Use lowercase in register address
- Remove address/size-cells from nodes without child
- Moved fixed clock to root on KV260
- Fix issues reported by dt-schema
- additional compatible string for qspi on SOM
- Move arm/xilinx.yaml to soc vendor to cover also other archs
- Describe new Microblaze V qemu platform
- Add missing mailbox destination compatible string
* tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add missing destination mailbox compatible
arm64: zynqmp: Fix clock node name in kv260 cards
arm64: zynqmp: Move fixed clock to / for kv260
dt-bindings: soc: Add new board description for MicroBlaze V
dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc
arm64: xilinx: Remove address/size-cells from gem nodes
arm64: xilinx: Remove address/size-cells from flash node
arm64: xilinx: Put ethernet phys to mdio node
arm64: xilinx: Remove mt25qu512a compatible string from SOM
arm64: xilinx: Use lower case for partition address
arm64: xilinx: Do not use '_' in DT node names
arm64: dts: xilinx: Apply overlays to base dtbs
Link: https://lore.kernel.org/r/CAHTX3dLyA1Y9guLKSNJTChFVvkspMfTa0odULyAdcuFUSiSH3A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.8, round 1
Highlights:
----------
- MCU:
- Add SPI support on STM32F746.
- Better describe vcc_3v3 for SD and DSI on stm32f469-disco.
- MPU:
- STM32MP13:
- Add DCMIPP (Digital Camera Memory Interface Piwel Processor) on STM32MP135.
- STMP32MP15:
- Change "phys" affectation from board to Soc dtsi file for USB host as it is hard linked
to the port 0 of usbphyc.
- Fix SCMI and No-SCMI compatible in boards.
- STM32MP25:
- Add BSEC support to read the device part number OTP and the package data register OTP.
* tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add dcmipp support to stm32mp135
arm64: dts: st: add bsec support to stm32mp25
ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
ARM: dts: stm32: minor whitespace cleanup around '='
ARM: dts: stm32: add SPI support on STM32F746
ARM: dts: stm32: add STM32F746 syscfg clock
ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco
Link: https://lore.kernel.org/r/9363227b-1c44-4a20-b245-efbbbf9ab1dd@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- new boards: Orange Pi Zero 2W, Transpeed 8K618-T
* tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
dt-bindings: vendor-prefixes: add Transpeed
arm64: dts: allwinner: h616: add Orange Pi Zero 2W support
dt-bindings: arm: sunxi: add Orange Pi Zero 2W
Link: https://lore.kernel.org/r/ZXtWFk-Bne835txP@archlinux
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards are the Geniatech XPI-3128 (RK3128), Sonoff iHost (rv1109)
One "new" soc is the rv1109 which is a two-core variant of the rv1126
and everything else is identical.
Lots of love for the old rk3128 (power-domains, gpu, gmac, usb) and
rv1126 (uart pins, i2c2 special case) and rework of aliases to have
core busses that are hard-numbered in boards and documentation centrally
in the dtsi, but the per board aliases in the boards (ethernet).
Plus the rk3036 got a yaml hdmi binding which required some small fixes.
* tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
ARM: dts: rockchip: fix rk3036 hdmi ports node
ARM: dts: rockchip: add gpio alias for gpio dt nodes
ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
dt-bindings: arm: rockchip: Add Sonoff iHost
ARM: dts: rockchip: Add rv1109 SoC
ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
ARM: dts: rockchip: Add i2c2 node to rv1126
ARM: dts: rockchip: Serial aliases for rv1126
ARM: dts: rockchip: Add alternate UART pins to rv1126
ARM: dts: rockchip: Enable GPU for XPI-3128
ARM: dts: rockchip: Add GPU node for RK3128
ARM: dts: rockchip: Add power-controller for RK3128
ARM: dts: rockchip: Enable gmac for XPI-3128
ARM: dts: rockchip: Add gmac node for RK3128
ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
...
Link: https://lore.kernel.org/r/3197878.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)
The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
and audio for the EVB1.
Some smaller improvements for the other socs (fifo-depths on rk3328,
gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
and a fix for the newly converted gpio-fan yaml binding).
Also a number of aliases were moved. Always-numbered core busses can have their
aliases in the soc dtsi, as is done in a number of cases already and other alises
like ethernet really should be per board.
* tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Split RG351M from Odroid Go Advance
dt-bindings: arm: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
arm64: dts: rockchip: add gpio alias for gpio dt nodes
arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
arm64: dts: rockchip: add Theobroma Jaguar SBC
dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
arm64: dts: rockchip: Add Powkiddy X55
dt-bindings: arm: rockchip: Add Powkiddy X55
...
Link: https://lore.kernel.org/r/3535836.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.8
Two (and a half) major items are coming with this pull request:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
Since no driver changes are needed in this work and the DTS is
directly affected by bindings change (running tests with `make
dtbs_check`), this pull includes all bindings changes, even though
usual practice is that bindings come via driver subsystem. Keeping
everything here makes review and testing easier. Also will allow us
to avoid conflicts related to new platforms (see below).
2. Add ExynosAutov920 SoC and SADK board (Samsung Automotive Development
Kit) with minimal support so far: serial console, GPIO-based keys and
PWM fan.
3. Add few bindings for upcoming Google GS101 SoC. This pull request
does not include its DTS yet, just few reviewed dependencies. DTS
will be coming soon.
[1] Documentation/devicetree/bindings/writing-bindings.rst
* tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (38 commits)
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
arm64: dts: exynos: add initial support for exynosautov920 SoC
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
...
Link: https://lore.kernel.org/r/20231212093105.13938-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps
- A series of patches to reorganize Motorola Mapphone related files to add
support for tablets as the peripherals are different compared to the
phones
- Apply am57xx-idk overlays to base dtbs
- Extcon update to use id-gpios and vbus-gpios
- Update omap4-epson-embt2ws to enable wlan clock and bluetooth-gnss
- Update for logicpd-torpedo to use bluetooth-gnss node name
* tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-embt2ws: Add Bluetooth
ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device
ARM: dts: omap4-embt2ws: enable 32K clock on WLAN
ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm: dts: omap: Apply am57xx-idk overlays to base dtbs
ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617
ARM: dts: motorola-mapphone: Move handset devices to a common file
ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894
dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets
Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof writes:
1-Wire bus drivers for v6.8
1. Add new AMD AXI 1-wire host driver for AMD programmable logic IP
core.
2. Add support for Analog Devices DS28EC20 EEPROM to existing DS2433
driver.
3. Few cleanups in W1 GPIO driver.
* tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: ds2433: add support for ds28ec20 eeprom
w1: ds2433: use the kernel bitmap implementation
w1: ds2433: introduce a configuration structure
w1: ds2433: remove unused definitions
w1: ds2490: support block sizes larger than 128 bytes in ds_read_block
w1: amd_axi_w1: Explicitly include correct DT includes
w1: gpio: rename pointer to driver data from pdata to ddata
w1: gpio: Drop unused enable_external_pullup from driver data
w1: gpio: Don't use platform data for driver data
w1: Add AXI 1-wire host driver for AMD programmable logic IP core
dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
Just like regular TLMM pin controllers in Qualcomm SoCs, the Low Power
Audio SubSystem (LPASS) Low Power Island (LPI) TLMM blocks share a lot
of properties, so common part can be moved to separate schema to reduce
code duplication and make reviewing easier.
Except the move of common part, this introduces effective changes:
1. To all LPASS LPI bindings: Reference pinmux-node.yaml in each pin
muxing and configuration node, to bring definition of "function" and
"pins" properties.
2. qcom,sc7280-lpass-lpi-pinctrl: Reference pinctrl.yaml in top leve.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Multi-Purpose Pin controller block is part of an SPMI PMIC (which in
turns sits on an SPMI bus) and uses a single value for the register
property that corresponds to its base address.
Clean up the example by adding a parent PMIC node with proper
'#address-cells' and '#size-cells' properties, dropping the incorrect
second register value, adding some newline separators and increasing the
indentation to four spaces.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231130172834.12653-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Updates for v6.8:
Core:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
on register write
- Kconfig fix for QMP dependency
- DT schema fixes
DPU:
- Add support for SDM670, SM8650
- Enable SmartDMA on SM8350 and SM8450
- Correct UBWC settings for SC8280XP
- Fix catalog settings for SC8180X
- Actually make use of the version to switch between QSEED3/3LITE/4
scalers
- Use devres-managed and drm-managed allocations where appropriate
- misc other fixes
- Enabled YUV writeback on SC7280, SM8250
- Enabled writeback on SM8350, SM8450
- CRC fix when encoder is selected as the input source
- other misc fixes
MDP4:
- Use devres-managed and drm-managed allocations where appropriate
- flush vblank event on CRTC disable
MDP5:
- Use devres-managed and drm-managed allocations where appropriate
DP:
- Add support for SM8650
- Enable PM runtime support
- Merge msm-specific debugfs dir with the generic one
- Described DisplayPort on SM8150 in DeviceTree bindings
- Moved dp_display_get_next_bridge() to probe()
DSI:
- Add support for SM8650
- Enable PM runtime support
GPU/GEM:
- demote userspace triggerable warnings to debug
- add GEM object metadata UAPI
- move GPU devcoredumps to GPU device
- fix hangcheck to skip retired submits
- expose UBWC config to userspace
- fix a680 chip-id
- drm_exec conversion
- drm/ci: remove rebase-merge directory (to unblock CI)
[airlied: fix drm_exec/amd interaction]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9auYqmo-7NSd9FsbNBCDf7aBevd=4xkcF3A5G_OGvMQ@mail.gmail.com
Merge series from Neil Armstrong <neil.armstrong@linaro.org>:
Document the SM8650 sound card using the SM8450 fallback
and add the SM8650 compatible to the sc8280xp sound card
driver to use the sm8650 card driver_name like SM8450 & SM8550.
Merge series from Rui Zhou <zhourui@huaqin.corp-partner.google.com>:
Add dt-bindings for es8326 and codec es8326 support.
Remove duplicate code, commonize headset codec init/exit API.
At the same time, Enable dual amp max98390 for rt5682s.
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
- A few fixes for usb/typec
Core Changes:
- ci: Updates to the defconfig, igt version, etc.
- writeback: Move the atomic_check helper from the encoder to connector
Driver Changes:
- rockchip: Add support for rk3588
- xe: Update the TODO list
- panel:
- nv3052c: Register documentation, init sequence improvements and
support for the Fascontek FS035VG158
- st7701: Add support for the Anbernic RG-ARC
- new driver: Synaptics R63353 panel controller, Ilitek ILI9805 panel
controller
- new panel: AUO G156HAN04.0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aqpn5miejmkks7pbcfex7b6u63uwsruywxsnr3x5ljs45qatin@nbkkej2elk46
Samsung pinctrl drivers changes for v6.8
1. New hardware: Add pin controllers for Samsung ExynosAutov920 and
Google Tensor GS101.
2. Few DT bindings cleanups: add specific compatibles for each device
using generic compatible as fallback. This affects only DTS, no
driver changes are needed.
3. Allow setting affinity on non wake-up external GPIO interrupts.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
