Renesas ARM defconfig updates for v6.9
- Disable obsolete board staging support in the Renesas ARM and ARM V7
multi-platform defconfigs,
- Enable support for the Renesas R-Car V4M (R8A779H0) SoC in the ARM64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779H0 SoC
ARM: multi_v7_defconfig: Disable board staging
ARM: shmobile: defconfig: Disable staging
Link: https://lore.kernel.org/r/cover.1707487828.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 72fee6b0a3 ("fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH")
disabled availablity of the SH_MOBILE_LCDC driver on the RENESAS arch.
This innocent change has a significant side-effect on the ARM's
multi_v7_defconfig, because FB_BACKLIGHT symbol is no longer selected,
what in turn leaves BACKLIGHT_CLASS_DEVICE symbol selected only as
a module. The latter disables some backlight related code in the DRM
core, because the DRM core is set to be compiled-in in this defconfig.
This leaves all DRM display panels without integrated backlight control,
even if the needed modules have been properly loaded and probed.
Fix this by selecting BACKLIGHT_CLASS_DEVICE to be compiled-in in
multi_v7_defconfig.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Keystone platforms used their own keystone_defconfig mostly to
enable CONFIG_ARM_LPAE which could not be added to the multi_v7 config.
Now that we have multi_v7_lpae_defconfig/lpae.config target we can and
should use that defconfig for Keystone. Add the remaining must-have
options for Keystone support to multi_v7_defconfig.
TI_SCI_*:
TI_MESSAGE_MANAGER:
Allows TI-SCI communication with system control firmware (PMMC) on K2G.
TI_KEYSTONE_NETCP*:
KEYSTONE_NAVIGATOR*:
Network driver, needed for NFS boot.
PCI_KEYSTONE*:
CAN_C_CAN*:
INPUT_GPIO_DECODER:
SPI_CADENCE_QUADSPI:
PWM_TIECAP:
Miscellaneous on-chip peripherals. Added as modules where possible.
RESET_TI*:
Used by DSP Remoteproc driver.
bloat-o-meter:
add/remove: 387/0 grow/shrink: 6/0 up/down: 130945/0 (130945)
Total: Before=22791863, After=22922808, chg +0.57%
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As part of general housekeeping, change the defconfig files to
sort lines based on the 'make savedefconfig' output, to make
it easier to do additional changes on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These allow user-space programs to create RPMSG endpoints and have
those endpoints show up as device files. They are enabled in the
ARM64 defconfig and are useful for the same reasons here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM defconfig updates for v6.8
- Enable support for the Renesas VersaClock 3 clock generator in the
arm64 defconfig,
- Enable support for the Renesas EtherAVB module in the arm multi_v7
defconfig,
- Refresh shmobile_defconfig for v6.7-rc1.
* tag 'renesas-arm-defconfig-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v6.7-rc1
ARM: multi_v7_defconfig: Enable CONFIG_RAVB
arm64: defconfig: Enable Renesas VersaClock 3 clock generator config
Link: https://lore.kernel.org/r/cover.1701433487.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
Samsung defconfig changes for v6.7
Enable several drivers for boards with Samsung Exynos ARM SoCs in
exynos_defconfig and multi_v7_defconfig: display PHYs, AHCI DWC, TM2
touchkey (used on ARM and ARM64 Exynos-based boards), Samsung camera
sensors and Intersil 29018 light sensor.
Enable also IIO in s5pv210_defconfig used by MAX17040 fuel gauge driver.
* tag 'samsung-defconfig-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: add driver for ISL29018
ARM: multi_v7_defconfig: add drivers for S5C73M3 & S5K6A3 camera sensors
ARM: multi_v7_defconfig: add tm2-touchkey driver
ARM: exynos_defconfig: replace SATA_AHCI_PLATFORM with AHCI_DWC driver
ARM: multi_v7_defconfig: add AHCI_DWC driver
ARM: multi_v7_defconfig: make Exynos related PHYs modules
ARM: s5pv210_defconfig: enable IIO required by MAX17040
Link: https://lore.kernel.org/r/20231016072911.27148-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop CONFIG_NF_LOG_NETDEV as it was removed in commit 1510618e45
("netfilter: nf_log_netdev: merge with nf_log_syslog").
Drop CONFIG_NFT_COUNTER as it was removed in commit 023223dfbf
("netfilter: nf_tables: make counter support built-in").
Drop CONFIG_NF_FLOW_TABLE_IPV6 and CONFIG_NF_FLOW_TABLE_IPV4 as they were
removed in commit c42ba4290b ("netfilter: flowtable: remove ipv4/ipv6
modules").
Drop CONFIG_NF_LOG_BRIDGE as it was removed in commit 77ccee96a6
("netfilter: nf_log_bridge: merge with nf_log_syslog").
Drop CONFIG_IP_NF_TARGET_CLUSTERIP from any remaining arm defconfigs as it
was removed in commit 9db5d918e2 ("netfilter: ip_tables: remove clusterip
target").
Drop CONFIG_USB_MUSB_AM35X as it was removed in commit 57f8e00d8a ("usb:
musb: Drop old unused am35x glue layer").
Drop CONFIG_NFT_OBJREF as it was removed in commit d037abc241
("netfilter: nft_objref: make it builtin").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20230919125112.15515-2-twoerner@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Thierry says this is not used anymore, and doesn't think it makes sense as
an iommu driver. The HW it supports is about 10 years old now and newer HW
uses different IOMMU drivers.
As this is the only driver with a GART approach, and it doesn't really
meet the driver expectations from the IOMMU core, let's just remove it
so we don't have to think about how to make it fit in.
It has a number of identified problems:
- The assignment of iommu_groups doesn't match the HW behavior
- It claims to have an UNMANAGED domain but it is really an IDENTITY
domain with a translation aperture. This is inconsistent with the core
expectation for security sensitive operations
- It doesn't implement a SW page table under struct iommu_domain so
* It can't accept a map until the domain is attached
* It forgets about all maps after the domain is detached
* It doesn't clear the HW of maps once the domain is detached
(made worse by having the wrong groups)
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We would like to support some additional OMAP class devices using the
common multi_v7_defconfig. To start, enable some audio/display related
modules:
DRM_OMAP/OMAP5_DSS_HDMI: For base DRM display support.
DRM_TI_TFP410: Used as a display bridge for several EVM's panels.
DRM_TI_TPD12S015: HDMI encoder on several OMAP/Sitara EVMs.
SND_SOC_TLV320AIC3X_I2C: For I2C attached TLV320AIC3x codecs.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This allows us to use the various remote processors on the TI OMAP and
Keystone family devices using the multi-v7 config, instead of only
with the OMAP/Keystone specific defconfigs (which we would like to
move away from needing).
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit a2225d931f ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MFD_RK808 got split into an I2C and SPI part named MFD_RK8XX_I2C and
MFD_RK8XX_SPI. Since there are no known ARMv7 boards using the SPI
connected RK8XX chips (which are new), it is enough to just enable
the I2C option.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: c20e8c5b12 ("mfd: rk808: Split into core and i2c")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in their
defconfigs, cf commit b495dfed70
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230203140404.1125850-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order for HPE platforms to be supported by linux on GXP it is
necessary for there to be fan and spi driver support. There fan driver
can support up to 16 fans that are driven by pwm through the CPLD. The
SPI driver supports access to the core flash and bios part. The SPI
driver spi-gxp was added previously to linux.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230113160651.51201-3-nick.hawkins@hpe.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 defconfig for 6.2 #2
It contains:
- updates for defconfigs to use the new CONFIG_VIDEO_MICROCHIP_ISC,
CONFIG_VIDEO_MICROCHIP_XISC config flags that replaced the
CONFIG_VIDEO_ATMEL_ISC, CONFIG_VIDEO_ATMEL_XISC. Drivers under
CONFIG_VIDEO_ATMEL_* were moved to staging and considered deprecated.
* tag 'at91-defconfig-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: multi_v7: switch to new MICROCHIP_ISC driver
ARM: configs: sama5/7: switch to new MICROCHIP_ISC driver
Link: https://lore.kernel.org/r/20221125142736.385654-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Qualcomm ARM defconfig updates for 6.1
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
* tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom: include defconfig in MAINTAINERS
ARM: multi_v7_defconfig: enable more Qualcomm drivers
ARM: qcom_defconfig: enable more Qualcomm drivers
Link: https://lore.kernel.org/r/20220921153734.1314952-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_SOC_AC97 symbol was recently enabled but does not
actually exist. From the patch description, I assume that this
was meant to be CONFIG_SND_SOC_AC97_CODEC, which is used in
imx_v6_v7_defconfig.
Fixes: 2cc1cd26e9 ("ARM: configs: Enable ASoC AC'97 glue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now default-enabled when CONFIG_SOC_SAMA7 is
used, so the defconfig entry can be dropped.
Fixes: f611af4c3b ("ARM: at91: Kconfig: implement PIT64B selection")
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
USB_FSL_USB2 is no longer available for Arm platforms and
was replaced by the chipidea driver.
Fixes: a390bef7db ("usb: gadget: fsl_mxc_udc: Remove the driver")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is selected by CONFIG_SND_SOC_FSL_ASOC_CARD=m, so the
extra line is redundant.
Fixes: 212e3b6b87 ("ARM: configs: Enable more audio support for i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PTP support is now enabled by default for configurations with
ethernet support, so drop the redundant entries in defconfig
files.
Fixes: e5f3155267 ("ethernet: fix PTP_1588_CLOCK dependencies")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now a hidden symbol, so just drop the defconfig line.
Fixes: 42d95d1b3a ("drm/rcar: stop using 'imply' for dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
