Panfrost driver provides a devfreq driver for the Mali GPU and allows to
scale GPU core frequency. Enable support for devfreq thermal integration
to enable cooling of GPU thermal zone by reducing GPU core frequency.
This fixes following warning during boot on Exynos5422-based Odroid XU4:
panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
NFS is widely used in debugging and Continuous Integration systems, so
enable the newest versions of protocol: v4.1 and v4.2.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit fd7d58f0db ("ARM: multi_v7_defconfig: renormalize based on recent
additions") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which were enabled by CONFIG_PERF_EVENTS.
In meantime, commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
ASPEED device tree updates for 5.5
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run
on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable devfreq events along with drivers for scaling frequency and
voltages of Exynos buses and Dynamic Memory Controller (DMC). This
usually brings energy saving benefits.
So far devfreq was disabled because it was causing hangs during system
reboot (voltage not matching reset frequency). This was already fixed.
Occasionally, devfreq might negatively impact performance of certain SoC
blocks, e.g. when a bus is scaled down but some block (like Mixer with
two Full HD windows) wants to perform high-throughput DMA operations.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sync with exynos_defconfig and enable following options for Samsung
Exynos SoC based boards:
1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller,
used for example on Exynos5433 (if booted in 32-bit mode),
2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs,
3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on
Exynos5260 RexNos REX-RED board,
4. SND_SOC_ARNDALE: sound support on Arndale boards,
5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,,
6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers
for handling micro USB on mobile Samsung boards (Trats, Trats2,
Rinato),
7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and
SMDK5250 boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 6334150e9a ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.
So fix the configs to have CONFIG_REMOTEPROC built in.
Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e9a ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Will Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung defconfig changes for v5.4
1. Enable AHCI platform driver on exynos defconfig for Exynos5250-based
Arndale board,
2. Make Max77802 PMIC regulator driver a built-in on multi_v7 defconfig
as it is essential early during boot.
* tag 'samsung-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in
ARM: exynos_defconfig: Enable AHCI-platform SATA driver
Link: https://lore.kernel.org/r/20190904175002.10487-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM Based defconfig Updates for v5.4
* Add DRM_MSM to ARCH_QCOM defconfigs
* tag 'qcom-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
This pull request contains Broadcom ARM-based SoCs defconfig updates for
5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in both
bcm2835_defconfig and multi_v7_defconfig
* tag 'arm-soc/for-5.4/defconfig' of https://github.com/Broadcom/stblinux:
ARM: defconfig: enable cpufreq driver for RPi
ASPEED defconfig updates for 5.4
- Enable the new AST2600 in multi_v7 and the aspeed_g5 configs.
- Regenerate defconfigs to drop old options
- Clean up network options
* tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: aspeed_g5: Enable AST2600
ARM: configs: multi_v7: Add ASPEED G6
ARM: configs: aspeed: Refresh defconfigs
ARM: configs: aspeed: Enable commonly used network functionality
Link: https://lore.kernel.org/r/CACPK8XdyWzghA0QPDzA_MK5FYwhT5afqDJHNdhc8mfD2uk8MfQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Maxim 77802 PMIC is a main PMIC for the following Exynos5 based boards:
Odroid XU, Chromebook Pit and Chromebook Pi. Driver for its voltage
regulator is needed very early during boot to properly instantiate SD/MMC
devices and mount rootfs, so change that driver to be compiled-in.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to make this change unique to
the multi_v7_defconfig
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
This adds the ASPEED AST2600 system and associated ASPEED devices so we
get build coverage.
The changes to the UART configuration to ensure the default console
(UART5) works.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables the driver for STM32 booster regulator found on stm32mp1.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.
In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Samsung defconfig changes for v5.3
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
* tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
ARM: defconfig: samsung: Cleanup with savedefconfig
ARM: exynos_defconfig: Trim and reorganize with savedefconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable support for Mali GPU with Panfrost and Lima drivers. Most of
Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
As Mali GPU is quite popular among ARM vendors, other platforms will
benefit as well.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
A bunch of armv7 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
Enable more options needed by Veyron Chromebooks.
* tag 'v5.2-rockchip-defconfig32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM Based SoC Defconfig Updates for v5.2
shmobile and multi_v7 defconfigs
* Enable support for CFI NOR FLASH
shmobile defconfig
* Enable USB [EO]HCI HCD PLATFORM and PHY_RCAR_GEN3_USB2
* Refresh for v5.1-rc1
* tag 'renesas-arm-defconfig-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: tegra: Default configuration updates for v5.2-rc1
Enable Trusted Foundations support in the default configurations for
Tegra and multi-v7. This is necessary because the symbol is no longer
selected by default.
* tag 'tegra-for-5.2-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
Update multi_v7_defconfig for dropped and moved options
This series of two patches first updates multi_v7_defconfig for
dropped options, and then updates it for moved options. We want to
do this on regular basis to make it easier to patch multi_v7_defconfig
without introducing errors and merge conflicts. We update the defconfig
in two patches to make sure we're not accidentally losing any needed
options.
After this, updating multi_v7_defconfig will become trivial, and most
likely only a small follow-up patches are needed after the merge window
to update it again for moved options.
* tag 'multi-v7-defconfig-for-v5.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
Signed-off-by: Olof Johansson <olof@lixom.net>
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable following drivers for merged devices:
- Batteries with BQ27XXX chips for Minnie boards.
- Elan eKTH I2C touchscreen for Minnie boards.
- GPIO charger for all Veyron boards.
- Rockchip SARADC driver for all rk3288 boards.
- Rockchip eFUSE driver for all rk3288 boards.
- TPM security chip for all Veyron boards.
- ChromeOS EC userspace interface for all chromebooks boards.
- ChromeOS EC light and proximity sensors for some chromebooks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some 32-bit Tegra devices supported by the multiplatform ARM v7 default
configuration ship with the Trusted Foundations firmware. Enable support
for it by default.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These are mostly automatically selected with make multi_v7_defconfig,
except for SH_DMAE which is selected only by sound/soc/sh/Kconfig.
Then CONFIG_SND_SIMPLE_SCU_CARD no longer exists at all.
And CONFIG_SOC_CAMERA and CONFIG_SOC_CAMERA_PLATFORM are tagged
to depend on BROKEN, so we can drop them.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Support for Exynos5420/5422/5800 SoCs requires MCPM to properly boot all
CPU cores on all currectly supported platforms: Peach Pit (Exynos5420),
Odroid XU3/XU3lite/XU4/HC1 (Exynos5422) and Peach Pi (Exynos5800).
Without it some CPU cores fail to come online. Remove then the ability to
disable MCPM and make it mandatory when Exynos542x/5800 support is
enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
With the SAR ADC driver ADC measurements can be taken though the IIO
framework. Additionally the SAR ADC has a channel which is connected to
an internal temperature sensor. The calibration data for this internal
temperature sensor is stored in the eFuse.
Enable the SAR ADC driver and the eFuse driver for the 32-bit Amlogic
Meson SoCs so we can expose the chip temperature to userspace through
the IIO hwmon driver (whose config option is already enabled:
CONFIG_SENSORS_IIO_HWMON=y).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM Based SoC Defconfig Updates for v5.1
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
* tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Refresh for v5.0-rc1
ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the base GCC plugin support symbol CONFIG_GCC_PLUGINS for
multi_v7_defconfig so that builds hosted on systems that have a
supported version of GCC along with the prerequisite headers will
allow GCC plugins to be used during the build. At the moment, this
will also enable the ARM per-task stack protector plugin, since
all its remaining Kconfig dependencies are fulfilled by default.
At the same time, enable the structleak plugin. This plugin ensures
that local struct type variables are fully initialized, preventing
inadvertent leaks of kernel state if such variables are shared with
userland. This is a reasonable transformation to apply by default,
since it does not adversely affect performance, and does not affect
GCC compiler diagnostics regarding the use of uninitialized local
variables.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
