This driver is mutually exclusive with the new 8250_OMAP
driver, so 'make defconfig' turns it off already. Drop
the reference now.
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Fixes: f98d45145e ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This option is 'default y' and has always been this way, the
line was added in error.
Fixes: dfe21dcaba ("ARM: defconfig: Enable ax88796c driver for Exynos boards")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a
managed ethernet network switch with either 8 copper ports or 6 copper
ports and 2 SFP cages.
Enable all required kconfig symbols, either as module where possible or
compiled-in where it is not possible.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable HPE GXP Architecture and its watchdog for base support for HPE
GXP SoCs.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The BeagleBone Black supports audio over HDMI, using a combination of the
DaVinci McASP (used for audio by a very large proportion of DaVinci systems
with audio support) and a TDA998x device driving the HDMI link (this is a
very widely used driver). Build both drivers as modules in multi_v7_defconfig
so they can be more easily included in testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Link: https://lore.kernel.org/r/20220506143005.3916655-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be
used to build a basic kernel for BCM47622 booting to console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Enable Airoha SoC on armv7 config.
- Enable CPU freq for arm64 based SoCs.
- Enable PMIC based (mt6397) RTC for mt8173
* tag 'v5.17-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
arm64: defconfig: Enable cpufreq for MediaTek
arm64: defconfig: Enable MT6397 RTC
Link: https://lore.kernel.org/r/9b90b407-025b-ec78-a626-faccdbc7ab39@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm defconfig updates for v5.18
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
* tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs
enabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which
allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All Tegra20/30/114 serial and audio drivers depend on the Tegra20 APB DMA
driver, enable this DMA driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra20 S/PDIF driver that is a part of HDMI audio subsystem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DragonBoard 410c is mainly supported by the ARM64 architecture
and defconfig, but it can also run well on the ARM32 architecture.
Add the necessary options to the multi_v7_defconfig to simplify
building an ARM32 kernel for DragonBoard 410c.
This is also a possible opportunity to slightly increase CI coverage
for older Qualcomm-based ARM32 platforms that are currently not
represented well in automated CI setups. The APQ8016 SoC used in DB410c
is still quite similar to those. DB410c is already used in some CI systems
so the same hardware could be re-used to get some basic ARM32 boot testing.
When deciding between built-in (y) and module (m), I usually used the
same that is already being used (and functional) in the ARM64 defconfig.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
These options have moved around when generating the defconfig. Update
them to reduce noise when generating future changes.
The exceptions are:
- NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected
by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED
doesn't force-enable the subsystem.
- The SPI_AX88796C network device. This was enabled in v5.11 for Exynos
boards. The driver is not yet merged but there's work being done, so
leave it alone for now.
- PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E
and FEC, but this may be changed in the future as imply does not do
what it was originally intended to do.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
These options were renamed in recent times. Add the new name so the
driver is built again, and drop the old name.
POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d620 ("PM: AVS:
smartreflex Move driver to soc specific drivers"). Add the new symbol.
QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8e ("cpuidle: Convert
Qualcomm SPM driver to a generic CPUidle driver").
SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba7 ("ASoC:
mmp-sspa: Add Device Tree support"). Enable that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
A number of options in the defconfig are enabled by other options;
either through selects or defaults.
SECCOMP is on by default as of commit 282a181b1a ("seccomp: Move config
option SECCOMP to arch/Kconfig").
NET_SWITCHDEV is enabled by NET_DSA. I think this is a result of commit
227d72063f ("dsa: simplify Kconfig symbols and dependencies").
SIMPLE_PM_BUS is selected ARCH_OMAP2PLUS as of commit 2a39af3870 ("ARM:
OMAP2+: Fix booting for am335x after moving to simple-pm-bus").
MICREL_PHY is selected by the ks8851 ethernet driver as of f0791b92d2 ("net:
ks8851: Select PHYLIB and MICREL_PHY in Kconfig").
SMSC_PHY is selected by USB_NET_SMSC95XX as of commit 05b35e7eb9 ("smsc95xx:
add phylib support").
STMPE_I2C is default y. It was explicitly added to the defconfig in commit
d8f0ddc838 ("ARM: defconfig: add STMPE ADC driver for P4 Note") but it's not
required.
CLK_ACTIONS and CLK_OWL_S500 was explicitly added in commit 26ba4a474a ("ARM:
multi_v7_defconfig: Enable Actions Semi platform and drivers"), but it defaults
on when ARCH_ACTIONS is enabled. Drop them.
CROS_EC_CHARDEV defaults to MFD_CROS_EC_DEV, which defaults to CROS_EC since
commit 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name").
TEGRA20_APB_DMA is selected by SOC_TEGRA_FUSE if ARCH_TEGRA_2x_SOC since commit
19d41e5e9c ("soc/tegra: fuse: Add APB DMA dependency for Tegra20").
USB_CHIPIDEA_TEGRA is enabled when USB_CHIPIDEA is enabled. It falls out
of the defconfig but is enabled, as intended by d50229cee6 ("ARM:
multi_v7_defconfig: Stop using deprecated USB_EHCI_TEGRA").
SERIAL_OWL_CONSOLE defaults to on when SERIAL_OWL=y, and has since it
was introduced.
Commit c6774ee035 ("media: Kconfig: make filtering devices optional")
made MEDIA_PLATFORM_SUPPORT, MEDIA_CAMERA_SUPPORT and MEDIA_CEC_SUPPORT
default y if MEDIA_SUPPORT_FILTER is disabled, so they fall out of the
defconfig.
MEDIA_CONTROLLER is selected by a number of drivers in the config, and
additionally defaults to MEDIA_PLATFORM_SUPPORT which is enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-3-joel@jms.id.au
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and
VIDEO_VIVID.
It must be set to y and not a module as the test driver VIDEO_VIVID
requires it to be built in.
Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some drivers have not been built as they gained dependencies in kconfig but those
dependencies were not added to the defconfig.
The MSM pinctrl drivers fell out of the defconfig as of commit be117ca322
("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
selected config"). Add PINCTRL_MSM so these stay enabled.
EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Default configuration changes for v5.15-rc1
Enables a couple of drivers by default so that the configuration is
useful on more devices. This also rebuilds the tegra_defconfig, which
hasn't been done in a long time.
* tag 'tegra-for-5.15-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
Link: https://lore.kernel.org/r/20210813162157.2820913-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic ARM configs change for v5.15:
- Enable CONFIG_MMC_MESON_MX_SDHC controller used on meson8/8b
* tag 'amlogic-arm-configs-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC
Link: https://lore.kernel.org/r/8e2b5139-86e6-0da3-75c4-d8df66448d51@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 defconfig for 5.15:
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
* tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
Link: https://lore.kernel.org/r/20210809134521.10155-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
