Enable FlexCAN support as module by default. FlexCAN can be found
on various NXP designs such as the i.MX and Vybrid SoC family.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add GPMI NAND controller support as required by some NXP i.MX6/7
based boards.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs.
Since OTP values might be required by drivers required during
boot, make sure the driver is built-in (e.g. i.MX thermal
driver).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PMIC often require the I2C bus, and the PMIC regulators might be
necessary to power on eMMC/SD-card or other supplies required
for successful boot. Make sure I2C driver for i.MX devices is
built-in.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Second set of defconfig changes for omap variants for v4.17" from Tony Lindgren:
This series enables more devices working on droid4 to make it easier
for people and distros to use out of the box.
* tag 'omap-for-v4.17/defconfig-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules
ARM: omap2plus_defconfig: Add UINPUT
ARM: omap2plus_defconfig: Enable MDM6600 USB PHY
ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD
ARM: omap2plus_defconfig: Enable PWM_VIBRA
Pull "Defconfig updates for omap variants for v4.17 merge window"
from Tony Lindgren:
We need to enable MMC_SDHCI option in both omap2plus_defconfig and
multi_v7_defconfig so systems are able to mount root when the dts files
get updated for sdhci.
Then let's update omap2plus_defconfig so we can patch it easier. And as
Arnd noticed earlier, just running make savedefconfig will accidentally
drop few Kconfig options. This is happening because some options are no
longer available as loadable modules like LIRC. Or new dependencies have
been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE.
So we first move the unchanged options around to their make savedefconfig
suggested place, then update the options to prevent make savedefconfig
dropping some options accidentally, and then finally drop the unused
options.
And after that we enable options DRM_OMAP and 8250_OMAP. These both have
been around for years now. And we do have 8250_OMAP warn about console
being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled
by default. Some users may need to update their inittab to use ttyS*
instead of ttyO* though. If this turns out to be a problem, we may want
to introduce a separate compatible for 8250-omap. But I think we're good
to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update
multi_v7_defconfig yet though and first see how 8250_OMAP change plays
out.
We also enable few new options for PM on am335x and am437x, and CEC in
omap2plus_defconfig. Naturally similar options can be later on added to
multi_v7_defconfig, but in this series we only enable OTG, MUSB and the
related PHYs in multi_v7_defconfig to make it more usable for distros.
* tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module
ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants
ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules
ARM: omap2plus_defconfig: Enable 8250_OMAP
ARM: omap2plus_defconfig: Switch to use omapdrm by default
ARM: omap2plus_defconfig: Enable CEC
ARM: omap2plus_defconfig: Enable am335x and am437x PM options
ARM: omap2plus_defconfig: Drop unneeded options
ARM: omap2plus_defconfig: Add SND_OSSEMUL
ARM: omap2plus_defconfig: Update LIRC options
ARM: omap2plus_defconfig: Select MFD_TI_LMU
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We need the CPCAP MFD and regulator built-in for UART console to work,
the rest can be loadable modules. Note that users probably want to also
enable serial 8250_OMAP that is not yet enabled by default.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull "Broadcom defconfig changes for 4.17" from Florian Fainelli:
This pull request contains multi_v7_defconfig changes for Broadcom
ARM-based SoC for 4.17, please pull the following:
- Tuomas enables the BCM2835 AUX driver which is necessary to provide
console on the Raspberry Pi 3
- Stefan turns on support for the BCM43438 Bluetooth adapter connected
via UART on the Raspberry Pi Zero Wireless and he also turns on
support for the thermal driver on the Pi 2 and 3.
* tag 'arm-soc/for-4.17/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3
ARM: bcm2385_defconfig: Enable BT support for BCM43438
ARM: multi_v7_defconfig: Enable serial console on RPi 3
We can support USB OTG with MUSB driver on many ARM SoCs. Let's
enable all the SoCs with MUSB as loadable modules. And let's enable
their related DMA hardware.
And as MUSB is an USB OTG controller, let's enable OTG support too.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's
can use sdhci-omap for eMMC/SD/SDIO controller..
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This turns on the CONFIG_BCM2835_THERMAL as module for
Raspberry Pi 2 and 3.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
as the primary serial console of the board, so enable it in the
multiplatform defconfig.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Pull ARM SoC platform updates from Arnd Bergmann:
"These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform
for the EP93xx based Liebherr controller BK3.1. It's a minor variation
of the EP93xx reference design and in active use, while EP93xx
apparently doesn't have enough new development to have any device tree
support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: omap: hwmod: fix section mismatch warnings
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
arm64: defconfig: enable EDAC GHES option
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
Wind down ARM/TANGO port
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
soc: Add SoC driver for Gemini
ARM: SAMSUNG: Add SPDX license identifiers
ARM: S5PV210: Add SPDX license identifiers
ARM: S3C64XX: Add SPDX license identifiers
ARM: S3C24XX: Add SPDX license identifiers
ARM: EXYNOS: Add SPDX license identifiers
ARM: imx: remove unused imx3 pm definitions
ARM: imx: don't abort MMDC probe if power saving status doesn't match
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
ARM: davinci: Use PTR_ERR_OR_ZERO()
...
Two defconfig updates for omaps
These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.
* tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM Based SoC Defconfig Updates for v4.16
shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
carrier board, as a built-in
multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a module
* tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: defconfig: Enable PWM
ARM: multi_v7_defconfig: Select PWM_RCAR as module
ARM: shmobile: defconfig: Enable SGTL5000 audio codec
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable following drivers for recently merged devices:
- CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI
- Sii9234 DRM HDMI-MHL bridge for Trats2
- dedicated Odroid ASoC machine driver for Odroid XU3/XU4
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The RPMSG_VIRTIO is now user selectable option so we explicitly
select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was
selected by ST_REMOTEPROC=m in multi_v7_defconfig.
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Broadcom defconfig changes for 4.15" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs multi_v7_defconfig file
updates for 4.15, please pull the following:
- Florian enables the Broadcom Hurricane 2 SoC in multi_v7_defconfig
(CONFIG_ARCH_BCM_HR2)
* tag 'arm-soc/for-4.15/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2
Pull "Amlogic: defconfig updates for v4.15" from Kevin Hilman:
- enable SDIO/MMC controller
* tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: multi_v7_defconfig: enable the Meson MX SDIO/MMC controller
Pull "Samsung defconfig changes for v4.15" from Krzysztof Kozłowski:
1. Enable USB3503 on multi_v7 for Odroid U3.
2. Enable USB Attached SCSI for Odroid HC1.
* tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board
ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board
ARM: multi_v7_defconfig: Enable USB3503 driver
Turn on Broadcom Hurrican 2 SoC support by default to get access to its
drivers.
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This enables the new Amlogic Meson MX SDIO/MMC controller driver, which
typically connects to the SD card and SDIO wifi module.
The driver is enabled as built-in to allow booting from the SD card.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports
UAS protocol. Enable support for it to make sure that all built-in storage
devices are available. Enable it as module to keep in line with multi_v7
policy to enable drivers as build-in only if they are critical for boot
process. On Odroid HC1 the kernel itself has to be still read from the
SD-card, so assume that modules/initrd is also accessible there.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Odroid U3 (Exynos 4412 based) for instance needs this driver,
otherwise its USB hub will not come up.
Also selecting it as built-in to allow booting from USB without
an initrd/initramfs.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
Sometimes root file system is deployed on SD card. It's
proper to build eSDHC driver into kernel.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull "ARM: tegra: Default configuration updates for v4.14-rc1" from Thierry Reding:
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
* tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
Pull "Broadcom defconfig changes for 4.14" from Florian Fainelli:
This pull request contains defconfig file changes for Broadcom ARM-based SoCs
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
* tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W
ARM: bcm2835_defconfig: Increase CMA for VC4
ARM: bcm2835_defconfig: Enable Mini UART console support
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
multi_v7_defconfig, as modules.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull "Renesas ARM Based SoC Defconfig Updates for v4.14" from Simon Horman:
* Enable DMA for Renesas serial ports
Geert Uytterhoeven says, "DMA for (H)SCIF(A|B) serial ports on Renesas
R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by
default.".
* Enable Ethernet AVB
For the iWave RZ/G1M Q7 SOM
* Replace DRM_RCAR_HDMI by generic bridge options
* Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
* Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
* Enable missing PCIE_RCAR dependency
Defconfig updates for various Kconfig updates covering
renamed Kconfig symbols, now missing dependancies and so on.
* tag 'renesas-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable DMA for Renesas serial ports
ARM: multi_v7_defconfig: Replace DRM_RCAR_HDMI by generic bridge options
ARM: multi_v7_defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
ARM: shmobile: defconfig: Refresh
ARM: shmobile: defconfig: Enable DMA for serial ports
ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options
ARM: shmobile: defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
ARM: shmobile: defconfig: Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
ARM: shmobile: defconfig: Enable missing PCIE_RCAR dependency
ARM: shmobile: defconfig: Enable Ethernet AVB
DMA for (H)SCIF(A|B) serial ports on Renesas R-Car Gen2 and RZ/G1 SoCs
is considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
Both were already enabled, but the (newer) ADV7511 audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A wide variety of TI platforms support NAND via the
CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this.
In addition, multi_v7_defconfig supports the dm8168-evm and that
supports root being on a SATA drive, so build the DM816 AHCI driver into
the resulting kernel as well.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
