The ltk050h3148w variant expects the horizontal component lane byte clock
cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the
pixel clock.
Using the pixel clock rate by default for this calculation was introduced
in commit ac87d23694 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock
rate to calculate lbcc") and starting from commit 93e82bb4de
("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
only panels that support burst mode can keep using the lane_mbps. So add
MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host.
Fixes: 93e82bb4de ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com
When conditionally checking for heap existence of a certian address in
pvr_vm_bind_op_map_init the condition whether the map request comes from a
user is incorrect: The context must not be the kernel-context to be a
user(space) context and should be looked up in pvr_heaps.
That makes addresses coming from userspace not being verfied against the
defined ranges and prevents firmware loading for meta cores.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208170856.1748413-1-knaerzche@gmail.com
This reverts commit b63a553e8f.
regcache_sync will try to reload the configuration in regcache to
hardware, but the registers of 4 Cluster windows and Esmart1/2/3 on
the upcoming rk3588 can not be set successfully before internal PD
power on.
Also it's better to keep the hardware register as it is before we really
enable it.
So let's revert this version, and keep the first version:
commit afa965a45e ("drm/rockchip: vop2: fix suspend/resume")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115719.1784834-1-andyshrk@163.com
When going through the disconnection flow we don't need to wait for PHY
readiness and hence we can skip the wait part. For disabling the function
returns false as an indicator that the power is not enabled. After all,
we are not even using the return value when Type-C is disconnecting.
v2: Cleanup for increased readibility (Imre)
BSpec: 65380
For VLK-53734
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212115130.485911-1-mika.kahola@intel.com
One bug fix
- Add a missing call to drm_atomic_helper_shutdown() in Exynos DRM
driver.
This function is necessary during system shutdown and when the driver
is unbound. Without this function, components like panels may not shut
down properly, potentially leading to power issue as mentioned in the
kernel documentation, specially in the "driver instance overview"
secstion of 'drm_drv.c'.
Two cleanups
- Convert '.remove()' callback function in the Exynos DRM platform
driver to a version that returns void instead of an integer.
- Change connector type of exynos_drm_dpi.c module to DPI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212051134.48524-1-inki.dae@samsung.com
Fix the following error while building for 32b:
In file included from ../drivers/gpu/drm/xe/xe_gt.c:6:
../drivers/gpu/drm/xe/xe_gt.c: In function ‘gt_ttm_mgr_init’:
../include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
Cast it to u64 so size of the second operand matches the first one when
building it for 32 bits.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Leave the types as u64, but cast the pointers to unsigned long before
assigning so the compiler doesn't throw warning about casting a pointer
to integer of different size.
Also, size_t should use %zu, not %ld.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
writeq() and readq() and other functions working on 64 bit variables
are not provided by 32b arch. For that it's needed to choose between
linux/io-64-nonatomic-hi-lo.h and linux/io-64-nonatomic-lo-hi.h,
spliting the read/write in 2 accesses. For xe driver, it doesn't matter
much, so just choose one and include in xe_mmio.h.
This also removes some ifdef CONFIG_64BIT we had around because of the
missing 64bit functions.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On DG2 we are now getting:
[ 104.456607] xe 0000:03:00.0: [drm] *ERROR* PCODE timeout, retrying with preemption disabled
Looks like we just need to invert the error check for
xe_pcode_try_request(), which returns zero on success.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On DG1, BAR2 is not reliable for reporting Vram size, need to use GSMBASE.
Simplify xe_mmio_total_vram_size to report vram size and usable size.
Signed-off-by: Philippe Lecluse <philippe.lecluse@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The bo_create ioctl relied on the internal ordering of memory regions to
be the same, make sure we don't allocate stolen instead of VRAM0.
Also remove a debug warning left in.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Philippe Lecluse <philippe.lecluse1@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting in 70.6.* GuC firmware the CSS header includes the submission
version, pull this from the CSS header. Prior 70.* versions accidentally
omitted this informatio so hard code to the correct values. This
information will be used by VFs when communicating with the PF.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Philippe Lecluse <philippe.lecluse1@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The blob doesn't fully support this yet, so fake for now to ensure our
driver load order is correct.
Once the blob supports pulling gt->info.engine_mask from the blob, this
patch can be removed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This adds support for stolen memory, with the same allocator as
vram_mgr. This allows us to skip a whole lot of copy-paste,
by re-using parts of xe_ttm_vram_mgr.
The stolen memory may be bound using VM_BIND, so it performs like any
other memory region.
We should be able to map a stolen BO directly using the physical memory
location instead of through GGTT even on old platforms, but I don't know
what the effects are on coherency.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When a job is inflight we may access memory to read the hardware seqno.
All user jobs have VM open which has a ref but kernel jobs do not
require VM so it is possible to not have memory ref. To avoid this, take
a memory ref on kernel job creation.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expand xe_mmio_wait32 to accept atomic and then use
that directly when possible, and create own routine to
wait for the pcode status.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
We don't need any macro for a simple check we can do explicitly
and clear.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
To make it simpler, all of the status checks also waits and
times out.
Also, no ktime precision is needed in this case, and we
can use usleep_range because we are not in atomic paths here.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Rather than a constant check on proto and wait not busy,
let's wait for the expected success and then check the
protocol afterwards.
With this, we can now use the regular xe_mmio_wait32
and kill this local need for the wait_for.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Possible now that the wait function returns the last read value.
So we can remove the users of i915's wait_for one by one...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
