This parameter is programmed by the kernel and influences the tiling
layout of images. Exposing it to userspace will allow it to tile/untile
images correctly without guessing what value the kernel programmed, and
allow us to change it in the future without breaking userspace.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/571181/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Assuming crtc->state is pointing at the correct thing for the
async flip commit is nonsense. If we had already queued up multiple
commits this would point at the very lates crtc state even if the
older commits hadn't even happened yet.
Instead properly stage/arm the event like we do for async flips.
Since we don't need to arm multiple of these at the same time we
don't need a list like the normal vblank even processing uses.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928152450.30109-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
In C20 pll_state link_bit_rate and clock fields are bit redundant. Since
many of the helpers assume the clock values, which are different from
link_bit_rate for dp2.0, convert the helpers to use the numbers that
are compatible with link_bit_rate.
Currently link_bit_rate is compatible with crtc_state->port_clock. The
function intel_c20pll_calc_port_clock returns the number which is
compatible with crtc_state->port_clock. In order to avoid extra
conversions b/ween clock and link_bit_rate, remove "clock" field from the
C20 pll_state and then rename "link_bit_rate" as "clock".
While at it rely on crtc_state->port_clock during C20 Pll programming.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207221025.2032207-2-radhakrishna.sripada@intel.com
Since the plane_state variable is declared outside the scaler_users
loop in intel_atomic_setup_scalers(), and it's never reset back to
NULL inside the loop we may end up calling intel_atomic_setup_scaler()
with a non-NULL plane state for the pipe scaling case. That is bad
because intel_atomic_setup_scaler() determines whether we are doing
plane scaling or pipe scaling based on plane_state!=NULL. The end
result is that we may miscalculate the scaler mode for pipe scaling.
The hardware becomes somewhat upset if we end up in this situation
when scanning out a planar format on a SDR plane. We end up
programming the pipe scaler into planar mode as well, and the
result is a screenfull of garbage.
Fix the situation by making sure we pass the correct plane_state==NULL
when calculating the scaler mode for pipe scaling.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207193441.20206-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On ADL+ the hardware automagically calculates the CCS AUX surface
stride from the main surface stride, so when remapping we can't
really play a lot of tricks with the main surface stride, or else
the AUX surface stride would get miscalculated and no longer
match the actual data layout in memory.
Supposedly we could remap in 256 main surface tile units
(AUX page(4096)/cachline(64)*4(4x1 main surface tiles per
AUX cacheline)=256 main surface tiles), but the extra complexity
is probably not worth the hassle.
So let's just make sure our mapping stride is calculated from
the full framebuffer stride (instead of the framebuffer width).
This way the stride we program into PLANE_STRIDE will be the
original framebuffer stride, and thus there will be no change
to the AUX stride/layout.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205180308.7505-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The drm_atomic_helper_check_wb_encoder_state() function doesn't use
encoder for anything other than getting the drm_device instance. The
function's description talks about checking the writeback connector
state, not the encoder state. Moreover, there is no such thing as an
encoder state, encoders generally do not have a state on their own.
Rename the function to drm_atomic_helper_check_wb_connector_state()
and change arguments to drm_writeback_connector and drm_atomic_state.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208010314.3395904-2-dmitry.baryshkov@linaro.org
drm-misc-next for 6.8:
UAPI Changes:
- Remove Userspace Mode-Setting ioctls
- v3d: New uapi to handle jobs involving the CPU
Cross-subsystem Changes:
Core Changes:
- atomic: Add support for FB-less planes which got reverted a bit
later for lack of IGT tests and userspace code, Dump private objects
state in drm_state_dump.
- dma-buf: Add fence deadline support
- encoder: Create per-encoder debugfs directory, move the bridge chain
file to that directory
Driver Changes:
- Include drm_auth.h in driver that use it but don't include it, Drop
drm_plane_helper.h from drivers that include it but don't use it
- imagination: Plenty of small fixes
- panfrost: Improve interrupt handling at poweroff
- qaic: Convert to persistent DRM devices
- tidss: Support for the AM62A7, a few probe improvements, some cleanups
- v3d: Support for jobs involving the CPU
- bridge:
- Create transparent aux-bridge for DP/USB-C
- lt8912b: Add suspend/resume support and power regulator support
- panel:
- himax-hx8394: Drop prepare, unprepare and shutdown logic, Support
panel rotation
- New panels: BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G,
Evervision VGG644804, SDC ATNA45AF01
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/yu5heqaufyeo4nlowzieu4s5unwqrqyx4jixbfjmzdon677rpk@t53vceua2dao
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
drm/i915 fixes for v6.7-rc5:
- d21a3962d3 ("drm/i915: Call intel_pre_plane_updates() also for pipes
getting enabled") in the previous fixes pull depends on a change that
wasn't included. Pick it up.
- Relax BXT/GLK DSI transcoder hblank limits
- Fix DP MST .mode_valid_ctx() return values
- Reject DP MST modes that require bigjoiner (as it's not yet supported on DP MST)
- Fix _intel_dsb_commit() variable type to allow negative values
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msum1hv8.fsf@intel.com
Remove the pointless check. If an IOMMU is providing transparent DMA API
ops for any device(s) we care about, the DT code will have enforced the
appropriate probe ordering already. And if the IOMMU *is* entirely
absent, then attempting to go ahead with CMA and either suceeding or
failing decisively seems more useful than deferring forever.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: fd1b62aa00.1700746094.git.robin.murphy@arm.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Fix pp_dpm_sclk_od and pp_dpm_mclk_od typos.
Those were defined as pp_*clk_od but used as pp_dpm_*clk_od instead.
This change removes the _dpm part.
Fixes: 8cfd6a0575 ("drm/amd/pm: Hide irrelevant pm device attributes")
Signed-off-by: Dmitrii Galantsev <dmitrii.galantsev@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.
of_device.h isn't needed, but of.h is for of_node_put().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231207162501.2629952-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The DRM subsystem keeps a record of the owner of a DRM device file
descriptor using thread group ID (TGID) instead of process ID (PID), to
ensures all threads within the same userspace process are considered the
owner. However, the DRM master ownership check compares the current
thread's PID against the record, so the thread is incorrectly considered to
be not the FD owner if the PID is not equal to the TGID. This causes DRM
ioctls to be denied master privileges, even if the same thread that opened
the FD performs an ioctl. Fix this by checking TGID.
Fixes: 4230cea89c ("drm: Track clients by tgid and not tid")
Signed-off-by: Lingkai Dong <lingkai.dong@arm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/PA6PR08MB107665920BE9A96658CDA04CE8884A@PA6PR08MB10766.eurprd08.prod.outlook.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Commit 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets").
Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.
Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.
What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dfed6b58d5 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
