This is already useful because it avoids some extra reads
where registers might have changed after the timeout decision.
But also, it will be important to end the kill of i915's wait_for.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Then, move the i915_utils.h include to its user.
The overall goal is to kill all the usages of the i915_utils
stuff.
Yes, wait_for also depends on <linux/delay.h>, so they go
together to where it is needed. It will be likely needed
anyway directly for udelay or usleep_range.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.
However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Part of commit dab96d8b61 ("drm/amdgpu: fix buffer funcs setting order on suspend")
got dropped accidently. Add it back.
Fixes: dab96d8b61 ("drm/amdgpu: fix buffer funcs setting order on suspend")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's the ti_sn65dsi86.pwm auxiliary driver that creates the pwmchip, so
let the auxiliary device be the parent of the pwm device.
Note that getting a reference to the ti-sn65dsi86's pwm using pwm_get()
isn't affected by this change as ti_sn65dsi86_add_aux_device() sets the
auxiliary device's of_node to that of the main device.
Also change PM runtime tracking and diagnostic messages to use that one.
After enabling runtime PM operation for the auxiliary device, all works
as expected as parent devices are handled just fine.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # Acer Aspire 1
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209153108.1988551-2-u.kleine-koenig@pengutronix.de
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 01a39f1c4f)
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the plane_state variable is declared outside the scaler_users
loop in intel_atomic_setup_scalers(), and it's never reset back to
NULL inside the loop we may end up calling intel_atomic_setup_scaler()
with a non-NULL plane state for the pipe scaling case. That is bad
because intel_atomic_setup_scaler() determines whether we are doing
plane scaling or pipe scaling based on plane_state!=NULL. The end
result is that we may miscalculate the scaler mode for pipe scaling.
The hardware becomes somewhat upset if we end up in this situation
when scanning out a planar format on a SDR plane. We end up
programming the pipe scaler into planar mode as well, and the
result is a screenfull of garbage.
Fix the situation by making sure we pass the correct plane_state==NULL
when calculating the scaler mode for pipe scaling.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207193441.20206-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e81144106e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On ADL+ the hardware automagically calculates the CCS AUX surface
stride from the main surface stride, so when remapping we can't
really play a lot of tricks with the main surface stride, or else
the AUX surface stride would get miscalculated and no longer
match the actual data layout in memory.
Supposedly we could remap in 256 main surface tile units
(AUX page(4096)/cachline(64)*4(4x1 main surface tiles per
AUX cacheline)=256 main surface tiles), but the extra complexity
is probably not worth the hassle.
So let's just make sure our mapping stride is calculated from
the full framebuffer stride (instead of the framebuffer width).
This way the stride we program into PLANE_STRIDE will be the
original framebuffer stride, and thus there will be no change
to the AUX stride/layout.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205180308.7505-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 2c12eb36f8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets").
Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.
Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.
What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
(cherry picked from commit cf9cb028ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Untangle unpinning from unlock/unref loop. The unpin only happens in
error paths so it is easier to decouple from the normal unlock path.
Since we never have an intermediate state where a subset of buffers
are pinned (ie. we never bail out of the pin or unpin loops) we can
replace the bo state flag bit with a global flag in the submit.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568335/
We shouldn't be running the job in error cases. This also avoids having
to think too hard about where the objs get unpinned (and if necessary,
the resv takes over tracking that the obj is busy).. ie. error cases it
always happens synchronously, and normal cases it happens from scheduler
job_run() callback.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568331/
The only A680 referenced from DeviceTree is patch level 1, which since
commit '90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying
GPU")' isn't a known chip id.
Correct the chip id to allow the A680 to be recognized again.
Fixes: 90b593ce1c ("drm/msm/adreno: Switch to chip-id for identifying GPU")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/569839/
Signed-off-by: Rob Clark <robdclark@chromium.org>
