The uncore code may not always be available (e.g. when we build the
display code with Xe), so we can't always rely on having the uncore's
spinlock.
To handle this, split the spin_lock/unlock_irqsave/restore() into
spin_lock/unlock() followed by a call to local_irq_save/restore() and
create wrapper functions for locking and unlocking the uncore's
spinlock. In these functions, we have a condition check and only
actually try to lock/unlock the spinlock when I915 is defined, and
thus uncore is available.
This keeps the ifdefs contained in these new functions and all such
logic inside the display code.
Cc: Tvrtko Ursulin <tvrto.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201100032.1367589-1-luciano.coelho@intel.com
It's been reported that DSI host driver's detach can be called without
the attach ever happening:
https://lore.kernel.org/all/20230412073954.20601-1-tony@atomide.com/
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
But that's another topic.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
This issue[1] was reported by Dan.
Changelog v1:
- fix build warning.
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Reported-by : Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
[WHY]
Some eDP panels's ext caps don't write initial value cause the value of
dpcd_addr(0x317) is random. It means that sometimes the eDP will
clarify it is OLED, miniLED...etc cause the backlight control interface
is incorrect.
[HOW]
Add a new panel patch to remove sink ext caps(HDR,OLED...etc)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- After a full reset, VF's FB will be cleaned. This
includes the VCN's fw_shared memory.
However, there is no suspend-resume routine for
SRIOV VF. Therefore, the data in the fw_shared
memory will be lost forever and it causes engine
hang later on.
We must repopulate the data in fw_shared during
SRIOV hw_init
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The rdev->pm.dpm.ps allocated by kcalloc should be freed in every
following error-handling path. However, in the error-handling of
rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed,
resulting in a memleak in this function.
Fixes: d70229f704 ("drm/radeon/kms: add dpm support for trinity asics")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The rdev->pm.dpm.ps allocated by kcalloc should be freed in every
following error-handling path. However, in the error-handling of
rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed,
resulting in a memleak in this function.
Fixes: 80ea2c129c ("drm/radeon/kms: add dpm support for sumo asics (v2)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check the alloc_workqueue return value in radeon_crtc_init()
to avoid null-ptr-deref.
Fixes: fa7f517cb2 ("drm/radeon: rework page flip handling v4")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
* Enable writeback.
* Add multiple fixes for DML2 and DCN35.
* Introduce small code style adjustments.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
drm_writeback requires to capture exact one frame in each writeback
call.
[HOW]
frame_capture is disabled after each writeback is completed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hardware may require different warmup approaches - big buffer or
individual buffers.
[HOW]
Setup warmup for big buffer when it is required by specific hardware.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
