Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
A few more Arm64 DeviceTree updates for v7.1
Introduce the Hamoa-based Lenovo IdeaCentre Mini X, the Dragonwing
IQ-615 (Talos) EVK, and a Talos EVK camera overlay.
Enable DisplayPort support on the Glymur CRD.
Add WiFi, Bluetooh, LEDs, and venus on LG-based SDM845 devices. Add
battery, charger, and display on the LG G7 ThinQ.
Enable SD-card, describe the audio amplifier, and increase the speed of
the i2c clock for touchscreen on the SHIFT SHIFT6mq.
Add camera subsystem, camera control interface, GPU, GMU, and GPU
cooling on the Talos platform. Enable the GPU on the Ride board.
* tag 'qcom-arm64-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X
dt-bindings: arm: qcom: Document the Lenovo IdeaCentre Mini X
arm64: dts: qcom: sdm845-shift-axolotl: Enable TFA9890 codec
arm64: dts: qcom: sdm845-shift-axolotl: Set higher touchscreen i2c clock
arm64: dts: qcom: sdm845-shift-axolotl: Enable sdcard
arm64: dts: qcom: talos: Add clocks for QoS configuration
arm64: dts: qcom: talos-evk-camera: Add DT overlay
arm64: dts: qcom: talos: Add camera MCLK pinctrl
arm64: dts: qcom: talos: Add CCI definitions
arm64: dts: qcom: talos: Add camss node
arm64: dts: qcom: talos: Add EL2 overlay
arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
arm64: dts: qcom: talos/qcs615-ride: Fix inconsistent USB PHY node naming
dt-bindings: arm: qcom: talos-evk: Add QCS615 Talos EVK SMARC platform
arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU
arm64: dts: qcom: talos: Add GPU cooling
arm64: dts: qcom: talos: Add gpu and rgmu nodes
arm64: dts: qcom: talos: add the GPU SMMU node
arm64: dts: qcom: sdm845-lg-common: Add chassis-type
arm64: dts: qcom: sdm845-lg: Add wifi nodes
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Support for the RV1103B SoC and the Onion Omega4 board using it.
While the RV1103B only got a B-extension to its name, the SoC internals
were reworked heavily. So likely it's mainly pin compatible to the
non-B variant.
The dt-binding for the RV1103B clock driver is shared with the clock-
driver branch going into the clock-tree.
* tag 'v7.1-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add Onion Omega4 Evaluation Board
dt-bindings: arm: rockchip: Add Omega4 Evaluation board
ARM: dts: rockchip: Add support for RV1103B
dt-bindings: soc: rockchip: grf: Add RV1103B compatibles
dt-bindings: clock: rockchip: Add RV1103B CRU support
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Microchip ARM64 device tree updates for v7.1
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
* tag 'microchip-dt64-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: add EV23X71A board
dt-bindings: arm: AT91: document EV23X71A board
arm64: dts: microchip: add LAN969x support
arm64: dts: microchip: add LAN969x clock header file
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Microchip AT91 SoC updates for v7.1
This update includes:
- device tree bindings conversion to DT schema for CHIPID, RAM
controller and PIT, PIT64b, ST timers
* tag 'at91-soc-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: arm: atmel,at91rm9200-sdramc: convert to DT schema
dt-bindings: arm: atmel,at91rm9200-st: convert to DT schema
dt-bindings: arm: microchip,sam9x60-pit64b : convert to DT schema
dt-bindings: arm: atmel,at91sam9260-pit: convert to DT schema
dt-bindings: arm: microchip,sama7g5-chipid : convert to DT schema
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
dt-bindings: Changes for v7.1-rc1
This contains a few conversions to DT schema along with various
additions and fixes to reduce the amount of validation warnings.
Included are also a new binding for the PCIe controller found on
Tegra264 as well as compatible strings for the Jetson AGX Thor
Developer Kit.
* tag 'tegra-for-7.1-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Document Jetson AGX Thor DevKit
dt-bindings: display: tegra: Document Tegra20 HDMI port
dt-bindings: arm: tegra: Add Tegra238 CBB compatible strings
dt-bindings: memory: tegra210: Mark EMC as cooling device
dt-bindings: memory: Add Tegra210 memory controller bindings
dt-bindings: phy: tegra: Document Tegra210 USB PHY
dt-bindings: arm: tegra: Add missing compatible strings
dt-bindings: interrupt-controller: tegra: Fix reg entries
dt-bindings: clock: tegra124-dfll: Convert to json-schema
dt-bindings: phy: tegra-xusb: Document Type C support
dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Qualcomm Arm64 DeviceTree updates for v7.1
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d2 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits)
arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP
arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay
arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
dt-bindings: qcom: Document samsung,coreprimeltevzw
arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
arm64: dts: qcom: sdm670: add llcc
arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support
arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins
arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses
arm64: dts: qcom: milos: Add CCI busses
arm64: dts: qcom: purwa-iot-evk: Enable UFS
arm64: dts: qcom: eliza: Add thermal sensors
arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP
arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly
arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly
arm64: dts: qcom: drop redundant zap-shader memory-region
arm64: dts: qcom: fix remaining gpu_zap_shader labels
arm64: dts: qcom: msm8996: fix indentation in sdhc2 node
arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board
arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: soc/omap updates for v7.1
* tag 'omap-for-v7.1/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New board, the Khadas Edge 2L. Newly added peripherals are the
OTP nvmem controllers for RK3528, RK3562 and RK3566/8, SPDIF on RK3576.
The RK3566/8 SoCs now also control the Pipe-clocks on their PCIe
controllers and UFSHC controller on RK3576 got an additional reset line.
Apart from that are of course individual board changes and fixes for
older issues that are not specific to the current development cycle.
* tag 'v7.1-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (44 commits)
arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
arm64: dts: rockchip: assign pipe clock to rk356x PCIe lanes
arm64: dts: rockchip: Add mphy reset to ufshc node
arm64: dts: rockchip: Enable OTP controller for RK3528
arm64: dts: rockchip: Enable OTP controller for RK356x
arm64: dts: rockchip: Enable OTP controller for RK3562
arm64: dts: rockchip: Enable PCIe CLKREQ# for RK3588 on Rock 5b-5bp-5t series
arm64: dts: rockchip: add SD/eMMC aliases for ArmSom Sige5
arm64: dts: rockchip: Add SPDIF nodes to RK3576 device tree
arm64: dts: rockchip: Add Khadas Edge 2L board
dt-bindings: arm: rockchip: Add Khadas Edge 2L board
arm64: dts: rockchip: Fix RK3562 EVB2 model name
arm64: dts: rockchip: Correct Joystick Axes on Gameforce Ace
arm64: dts: rockchip: Correct Fan Supply for Gameforce Ace
Revert "arm64: dts: rockchip: add SPDIF audio to Beelink A1"
arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v7.1
Generic Fixes/Cleanups:
- k3-pinctrl: Cleanup alignment and reorder macros
- ti,min-output-impedance addition to all K3 board DT files
SoC Specific Features and Fixes:
AM62L:
- Add RNG node
- Support cpufreq scaling
J721S2:
- Make MAIN domain system control bus a simple-bus
- Add second DSI node
J722S:
- Add main_i2c4 device node
J7200:
- Make MAIN domain system control bus a simple-bus
Board Specific Features and Fixes:
AM642 EVM:
- Add ICSSG0 overlay for dual EMAC support
AM62:
- LP-SK: Enable internal pulls for MMC0 data pins
- SK: Enable Main UART wakeup
- phycore-som: Add 128MiB of global CMA
- Verdin: Add Zinnia board support and misc cleanup
AM62A7-SK:
- Enable Main UART wakeup
- Fix pin name in comment from M19 to N22
AM62D2 EVM:
- Enable Main UART wakeup and set wakeup-source system-states
AM62L3 EVM:
- Disable MMC1 internal pulls on data pins
- Enable Main UART wakeup and enable wkup_uart0 pins/target node
AM62P:
- SK: Disable MMC1 internal pulls on data pins and enable Main UART
wakeup
- Verdin: Add Zinnia support and misc cleanup
AM68 PHYBoard:
- Add DSI->LVDS bridge, LVDS-Display overlay and PEB-AV-15 overlay
AM69 Aquila:
- Fix DP regulator enable GPIO
J721S2 CPB:
- Add QSPI flash partition details
Removal of SMARC-sAM67 board:
- Kontron SMARC-sAM67 board support along with all bindings
are dropped as board is no longer planned for production
* tag 'ti-k3-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (47 commits)
arm64: dts: ti: k3-pinctrl: sort shift values numerically
arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment
arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
arm64: dts: ti: k3-am62p-verdin: Add Zinnia
arm64: dts: ti: k3-am62p-verdin: Add SPI_1_CS as GPIO
arm64: dts: ti: k3-am62p-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Add Zinnia
arm64: dts: ti: k3-am62-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Fix SPI_1 GPIO CS pinctrl label
dt-bindings: arm: ti: Add verdin am62/am62p zinnia board
arm64: dts: ti: k3-j721s2: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-am62-lp-sk: Enable internal pulls for MMC0 data pins
arm64: dts: ti: k3-am62l3-evm: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62p5-sk: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62d2-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA DTS updates for v7.1
- dt-bindings updates:
- Document fallback compatible for Stratix10 SoCDK eMMC board
- Document compatible for the Agilex5 SoCFPGA modular board
- Add emmc support for the Stratix10
- Drop CPU masks from the GICv3 PPI interrupts for Agilex5
* tag 'socfpga_updates_for_v7.1_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: agilex5: Drop CPU masks from GICv3 PPI interrupts
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: stratix10: Add emmc support
dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v7.1
1. New board: Exynos5250 based Google Manta (Nexus 10).
2. Few cleanups.
* tag 'samsung-dt-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exyons4412: Drop duplicated I2C address/size-cells
ARM: dts: exynos4210-smdkv310: Drop duplicated I2C address/size-cells
ARM: dts: exynos3250: Drop duplicated I2C address/size-cells
ARM: dts: exynos: Add Google Manta (Nexus 10)
dt-bindings: ARM: samsung: Add Google Manta (Nexus 10)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v7.1
1. Add initial support for Axis ARTPEC-9 SoC and Alfred board using it.
Just like ARTPEC-8, this is a derivative of Samsung Exynos SoC made
for Axis, sharing most or all of core SoC blocks with Samsung
designs.
2. New boards: Exynos7870 based Samsung Galaxy J7 (2016) and Samsung
Galaxy J5 (2017).
3. Google GS101 Pixel phone: describe all PMIC regulators and Maxim
fuel-gauge.
4. ExynosAutov920: add G3D (GPU) clock controller (CMU).
* tag 'samsung-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos8895: Move I2C address/size-cells to DTSI
arm64: dts: exynos7870: Move I2C address/size-cells to DTSI
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 fuel gauge
arm64: dts: exynos: add initial support for Samsung Galaxy J5
dt-bindings: arm: samsung: add compatible for samsung-j5y17lte
arm64: dts: exynosautov920: add CMU_G3D clock DT nodes
arm64: dts: exynos: gs101-pixel: add all S2MPG1x regulators
arm64: dts: exynos: add initial support for Samsung Galaxy J7 (2016)
dt-bindings: arm: samsung: add compatible for samsung-j7xelte
arm64: dts: axis: artpec9: Fix missing soc unit address
arm64: dts: axis: Add ARTPEC-9 Alfred board support
arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support
dt-bindings: arm: axis: Add ARTPEC-9 alfred board
dt-bindings: clock: Add ARTPEC-9 clock controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stratix 10 devkit support a separate eMMC daughter card. Add compatible
string for the Stratix 10 SoCDK eMMC daughter board with
"altr,socfpga-stratix10-socdk" as a fallback, since this variant is based
on the standard SoCDK board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Jetson AGX Thor Developer Kit uses the same module (P3834) as the
P3971 reference platform but a slightly different carrier board (P4071).
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Nyan Blaze and Nyan Big, as well as Jetson Nano (P3450-0000), Darcy
(P2894-0050-A08) and Pixel C (Smaug) were never mentioned. Add them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Armv8 Juno/FVP/Vexpress updates for v7.1
1. The primary addition is initial support for Zena CSS that includes:
a new binding compatibility, a shared `zena-css.dtsi` description, and
an FVP device tree.
2. Extension of Corstone-1000 FVP platform support with binding updates
to add the new `arm,corstone1000-a320-fvp` platform, and the
`arm,corstone1000-ethos-u85` NPU integration.
Overall, this combines new platform enablement with some DTS layout
cleanup for Arm reference FVP based systems.
* tag 'juno-updates-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm/corstone1000: Add corstone-1000-a320
arm64: dts: arm/corstone1000: Move FVP peripherals to separate .dtsi
arm64: dts: arm/corstone1000: Move cpu nodes
dt-bindings: npu: arm,ethos: Add "arm,corstone1000-ethos-u85"
dt-bindings: arm,corstone1000: Add "arm,corstone1000-a320-fvp"
arm64: dts: zena: Move SRAM into SoC and memory node out of SoC
arm64: dts: zena: Add support for Zena CSS
dt-bindings: arm: Add Zena CSS compatibility
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
MediaTek ARM64 DeviceTree updates
This adds fixes and improvements for already supported devices.
In particular:
- The gpio-ranges pin could was fixed in MT6795, MT7981B, and
MT7986A SoCs, as the very last GPIO was unusable; Even though
anyway unused, this fixes the hardware description.
- Model string fixes for Bananapi BPI-R4 Pro 4E/8X: now the
correct model is shown.
- The MT6359 PMIC gets disambiguation for two default regulator
names, mainly fixing issues seen on U-Boot, but also making
the regulators visually distinguishable in a summary...!
- Aliases for eMMC/SD controllers added in MT8365 EVK board,
MT8395 Radxa NIO-12L and Genio 1200 for consistency
- Fixes to the MediaTek AUDSYS devicetree binding
....and honorable mention goes to:
- MT8195 Cherry Chromebooks get their WiFi on PCI Express and
Bluetooth on USB described with the proper power supplies now
tied to the correct devices (USB VBUS and PCIE3v3): this is
now described almost perfectly, or at least links the right
resources in the right places.
This is also done as a preparation for when the M.2 E-Key
connector binding will be upstreamed.
- MT8195 Cherry Dojo gets its M.2 M-Key slot correctly described
with the new pcie-m2-m-connector binding.
* tag 'mtk-dts64-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt7986a: Fix gpio-ranges pin count
arm64: dts: mediatek: mt7981b: Fix gpio-ranges pin count
arm64: dts: mediatek: mt6795: Fix gpio-ranges pin count
dt-bindings: arm: mediatek: audsys: fix formatting issues
arm64: dts: mediatek: mt8195-cherry-dojo: Describe M.2 M-key NVMe slot
arm64: dts: mediatek: mt8195-cherry: add WiFi PCIe and BT USB power supplies
arm64: dts: mediatek: mt7988a-bpi-r4pro: fix model string
arm64: dts: mt8167: Reorder nodes according to mmio address
arm64: dts: mediatek: mt6359: give regulators unique names
arm64: dts: mediatek: mt8365: Describe infracfg-nao as a pure syscon
arm64: dts: mediatek: mt8365-evk: add mmc aliases
arm64: dts: mediatek: mt8395-radxa-nio-12l: add mmc aliases
arm64: dts: mediatek: mt8395-genio-common: add mmc aliases
arm64: dts: mediatek: mt8195-cherry: Disable xhci1 completely
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add missed legancy lpc43xx board compatible string to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: /: failed to match any schema with compatible: ['ciaa,lpc4337', 'nxp,lpc4337', 'nxp,lpc4350']
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add device tree binding documentation for the NXP S32N79 automotive SoC
and the S32N79 Reference Design Board (S32N79-RDB).
The S32N79 is an automotive-grade SoC featuring eight ARM Cortex-A78AE
cores organized for high-performance networking and gateway applications
in vehicles.
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Introduce a new DT compatible string for the NXP i.MX8MP audio board
(version 2).
i.MX Audio Board is a configurable and functional audio processing
platform. Integrating a variety of audio input and output interfaces into
the system, the i.MX Audio Board supports HDMI input, HDMI eARC,
S/PDIF I/O, 2-ch ADC line-in, 24-ch DAC line-out and more. Based on these
features, rich audio application cases can be realized.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add bindings for various SolidRun boards:
- i.MX8MP HummingBoard IIoT - based on the SolidRun i.MX8M Plus SoM
- SolidSense N8 - single-board design with i.MX8M Nano
- i.MX8M Mini System on Module
- i.MX8M Mini HummingBoard Ripple
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
